Search

The objective of this paper is the investigation of the annual performance of a solar power plant with linear Fresnel reflectors in the El-Oued region at Algeria. The solar collectors produce water steam that feeds a turbine to produce electricity. The System Advisor Model (SAM) tool is used for simulation. The mean net daily electricity production rate from 8:30 am to 5:30 pm is 48 MWe, and the respective annual production is 210,336 MWh/year. The mean daily optical efficiency of the solar field was close to 52%, while the mean thermal efficiency was about 39%. The net daily cycle efficiency is found to be 24%. The net capital cost of the examined system is $393 million, and the developer net present value is $47 million; the investor net present value is $15 million, the entire period of capital recovery is 11 years, and the levelized cost of electricity is 0.0382 $/kWh. The solar power plant leads to the yearly avoidance of 420,672 tons carbon dioxide emissions (operational cost savings of $6.1 million). Based on the obtained results, linear Fresnel reflectors can be used to achieve satisfying, energetic, financial, and environmental performance that can lead to sustainability. [ABSTRACT FROM AUTHOR]

In order to understand the behavior and to determine the effective operational parameters of a solar-driven ejector air conditioning system at low or medium temperature, a dynamic model depends on the principles of conservation, the momentum mass and energy is developed. For this purpose, the thermodynamic characteristics of the liquid and vapor refrigerant were identified using the Engineering Equation Solver (EES) software. Linear Fresnel solar reflector has been used as a tool to convert solar energy into thermal energy. Water (R718) was used as a refrigerant. The operational conditions for the studied solar-driven ejector air conditioning system are as follows: evaporator temperature "Te =283.15 K", condenser temperature "Tc =305.15 K", and generator temperature "Tg = 373.15 K". The performance of the ejector air conditioning system was compared as a function of the operating parameters of the subsystem. The average value of thermal efficiency of the Fresnel linear concentrator has reached 31.60 %, the drive ratio "ω" is 0.4934, the performance value of the ejector air conditioning subsystem "COPejc" is 60.664 % and the average value of the thermal performance of the machine "STR" has touched 19.17 %. The results obtained through this scientific subject are stimulating and encouraging, where this technique can be used for air conditioning in desert areas in southern Algeria, where fossil energy (petroleum, gas, etc.) is extracted and produced in various types. [ABSTRACT FROM AUTHOR]

In this study industrial grade Multi-walled carbon nanotubes (MWCNTs) nanoparticles dispersed in distilled water (DW) are investigated to evaluate its impact on the thermal behavior of linear Fresnel solar reflector technology. The stability and thermophysical properties of the MWCNTs/DW nanofluids are obtained experimentally. Stable nanofluids that showed higher thermal conductivity compared to DW were obtained. Thermal conductivity (TC) of the nanofluids increased by 3%, 6% and 7% for the volume fractions of 0.05%, 0.1% and 0.3% at 25 °C, respectively. TC also increased with the increase in temperature (i.e. 11% for 0.3% volume fraction at 70 °C). A one-dimensional model is developed to evaluate the transient behavior of the nanofluid within the linear solar reflector. Matlab code based on the finite difference method is developed to solve the energy balance equations at the different components of the studied solar collector. The numerical model is then validated with experimental results, where a maximum experimental thermal efficiency of 29.205% at 14:00 is achieved. MWCNTs/DW nanofluid with 0.3% volume fraction has the highest thermal efficiency of 33.81% and the highest PEC value as well as the lowest entropy generation. • Small linear Fresnel reflector has been manufactured and experimentally tested. • The maximum experimental thermal efficiency of DW is equal to 29.205%. • Stability and thermophysical properties of the MWCNTs/DW nanofluids are obtained. • Thermal conductivity of the nanofluids increased with the increasing volume fractions. • Highest thermal efficiency of 33.81% was obtained for MWCNTs/DW nanofluid. [ABSTRACT FROM AUTHOR]

The concentrating solar systems of linear Fresnel reflectors offer the ability to generate electricity from solar energy. The main objective of this paper is to perform a transient numerical simulation on a linear Fresnel solar reflector directed to produce superheated water steam for the power plants, in order to determine its efficiencies (optical and thermal), where the heat transfer fluid mass flow inside the copper absorber tube is 0.045 kg/s. The dimensions of the studied linear Fresnel solar collector are the same dimension as the modular system Nova-1 of NOVATEC SOLAR Company. The dimension of the studied model is 1D. For this purpose, El-Oued region has been designated as a study field. The twelve recommended average days for months have been selected for the study. This paper was based on a numerical solution using the finite differences method. MATLAB has been used as a software language. The optical efficiency of the LFR solar receiver has reached 53.7% where the thermal efficiency has reached 37.5%, while the pressure drop within the absorber pipe has reached 02 bars. As for superheated steam temperatures variations, it ranged between 233.35 °C and 263.75 °C, knowing that the water steam inlet temperature when entering the absorber tube is equal to 140 °C. As for the overall coefficient of heat loss, its mean value is 5.84 W/m2.°C. The results obtained are very encouraging to invest in this steam power plant, especially in the desert areas, which are rich in solar energy. Image 1 • Optical efficiency of the solar reflector obtained was 53.7% • Thermal efficiency of the solar reflector achieved was 37.5% • An annual electricity capacity of more than 2000 MW can be produced • This technique is 100% clean and has no negative environmental impact [ABSTRACT FROM AUTHOR]