Search

Accepted: 2018-08-05, 資料番号: SA1180110000

Accepted: 2012-12-09, 資料番号: SA1004416000

Accepted: 2012-03-27, 資料番号: SA1004104000

The orbit of a solar sail can be controlled by changing the attitude of the spacecraft. In this study, we consider the spinning solar power sail IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun), which is managed by Japan Aerospace Exploration Agency (JAXA). The IKAROS attitude, i.e., the direction of its spin-axis, is nominally controlled by the rhumb-line control method. By utilizing the solar radiation torque, however, we are able to change the direction of the spin-axis by only controlling its spin rate. With this spin rate control, we can also control indirectly the solar sail’s trajectory. The main objective of this study is to construct the orbit control strategy of the solar sail via the spin-rate control method. We evaluate this strategy in terms of its propellant consumption compared to the rhumb-line control method. Finally, we present the actual flight attitude data of IKAROS and the change of its trajectory.

Accepted: 2011-02-19, 資料番号: SA1003628000

Accepted: 2011-06-01, 資料番号: SA1002966000

The world’s first solar sail IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun) which is operated by Japan Aerospace Exploration Agency (JAXA) lost communication with the ground station due to the power short-age on December 24, 2011. In order to acquire IKAROS again after the power comes back, we immediately initiated to predict the attitude and orbit for the spacecraft.

The Japan Aerospace Exploration Agency (JAXA) makes the world’s first solar power sail demonstration of photon propulsion and thin film solar power generation during its interplanetary cruise by IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun). It deployed and spans a membrane of 20 m in diameter taking the advantage of the spin centrifugal force. It accelerates and controls the orbit using solar radiation pressure successfully. This is the first actual solar sail flying an interplanetary voyage. This paper presents the summary of development and operation of IKAROS.

This paper describes design criteria for sail surface quality derived from requirements about attitude dynamics of spinning solar sail spacecraft. The method has been developed by an experience of the Japanese interplanetary solar sail mission IKAROS. The authors derived, in their previous work, a combination of a generalized spinning attitude model and a finite element model-based sail deformation analysis method to directly relate the sail surface wrinkling and the attitude disturbance via solar radiation pressure effect. Based on this work, this paper attempts to derive design criteria for the sail surface quality, which is useful for the mission analysis and the quality control in sail production. Specifically, this paper provides an acceptable deformation level as a function of scale length for given attitude stability requirements against the solar radiation pressure disturbance, which is then compared and verified by the post-flight analysis of IKAROS.

IKAROS is the Japanese deep-space solar sail technology demonstration mission launched in 2010. IKAROS is a spinner spacecraft with the 20m-span solar sail kept extended by the centrifugal force. During its solar sailing flight from Earth to Venus, IKAROS showed a unique attitude behavior due to solar radiation pressure attracted on the sail. This paper proposes a generalized model of spinning sail-craft, which clearly explains the attitude behavior observed in IKAROS. Then it is shown that this behavior has a clear dependency on the sail shape and the optical property distributions on the sail. We show the estimation results of the on-orbit sail shape using this new model.

The Japan Aerospace Exploration Agency (JAXA) is studying the feasibility of using the solar power sail as a new propulsion engine for deep space exploration missions. In this paper, the sail shape and equipment layout for missions utilizing small-sized solar power sails are proposed. The two-stage deployment method of the sail is also proposed. The sail need to be deployed statically at the first stage, and two types of deployment mechanisms are introduced. On the other hand the second stage of the deployment can be performed dynamically, and the oscillating motion of the membrane is converged by tethers connecting the membrane to the main body. The deployment motions are analyzed by numerical simulations using multi-particle models in order to verify the deployment. They are compared with the results calculated by finite element method models. The numerical simulation results are discussed from the technological viewpoint of the sail deployment dynamics and mechanisms.

In this paper, the attitude motion and attitude control strategy of spinning solar sail are discussed. As the spinning type solar sail does not have any rigid structure to support its membrane, the impulsive torque by the RCS can introduce oscillatory motion of the membrane. Thus, an “oscillation free” attitude controller is needed, which takes into account the flexibility of the membrane and avoid unnecessary oscillatory motion. First, the dynamics model and numerical model were introduced, and the validity of these models and dominant out-of-plane membrane vibration mode is examined by membrane vibration experiment and comparison between both models. Then, based on the analysis of the dynamics of torque-free motion, it was shown that a spinning solar sail has three oscillation modes of nutation, one of which is equal to the spinning rate of the spacecraft. The dominancy of each nutation mode was analytically and numerically discussed. Then, we discussed the spin axis maneuver control using conventional RCS. It was analytically shown that continual impulsive torque synchronizing the spin rate can excite nutation velocity and that a controller is needed to damp the nutation while controlling the spin axis at the same time. The authors proposed new controller named Flex-RLC and improved one. Their effectiveness was verified by numerical simulations using precise multi-particle numerical model which can express higher order oscillatory motion of the flexible membrane, and it was found that the proposed method can control the attitude of spinning solar sail while drastically reduces the nutation velocity compared with conventional control logic. So, it can be said that the proposed method is promising fast and stable controller for spinning solar sail.

資料番号: SA1005035000

This study investigates the trajectory analysis of small solar sail demonstration spacecraft IKAROS considering the uncertainty of solar radiation pressure. Estimation of solar sail force model in space is the key factor for successful solar sail navigation because the solar sail have large uncertainty due to the flexible membrane. Since the sail wrinkles after the deployment and its surface will suffer from degradation, the solar sail force model is difficult to develop on the ground. In this paper, a practical analysis of estimating the solar sail force model from Doppler and range observable is investigated. This is demonstrated by orbit determination including parameter estimation of solar sail model. Some examples are described to investigate better parameters to estimate the solar sail force model.

The solar sailing spacecraft is one of the promising propulsion systems for the future deep space exploration mission. Japan Aerospace Exploration Agency (JAXA) has been studying the spin solar sail spacecraft which has a squared-shape type solar sail. One of the most significant objective to control the satellite orbit of the spacecraft is to estimate the thrust force induced by the photon, namely to establish the acceleration model before the launch. In a view point to use this model in orbit, the calibration of the acceleration model and evaluation of the dynamics on orbit are also important issue. This paper presents the way to construct the acceleration model of the Solar Radiation Pressure (SRP) on ground, and the calibration and evaluation strategy for this model by using the on-orbit data.

Solar sail is one of the promising propulsion systems for future deep space exploration missions as it does not require any fuel to acquire propulsive force. Although folding method and deployment mechanism of the sail have been intensively developed, attitude control of the solar sail, which is necessary for the orbital control by the solar sail, has not been much studied. This paper discusses the attitude dynamics and the control method of a spinning type solar sail spacecraft. The spinning type solar sail, where the sail equipped around the spacecraft hub is to be deployed and extended by centrifugal force, has no rigid structure supporting its membrane. This type of mechanism has the advantage in its simple and lightweight structure, however, the attitude control is difficult due to the flexibility of the membrane. In this paper, we introduced a mathematical dynamics model including first oscillation mode of the membrane which can handle coupled motion of a rigid spacecraft and a flexible membrane, and analytically developed a controller that can avoid unnecessary oscillatory motion. The performance of the controller was verified by numerical simulations using more precise multi-particle numerical model.