Search

Drop impact dynamics with solidification has been a hot topic of research recently. However, numerical studies to that end mainly concentrate on spherical drops, paying less attention to non-spherical ones that are ubiquitous in industrial applications like additive manufacturing and plasma spraying. Therefore, a phase field model accelerated with the shared-memory parallelism OpenMP is proposed to simulate the impact of a non-spherical heavy metal droplet in actual additive manufacturing conditions. The tracking of the gas–liquid interface is realized by the finite difference solution of the Navier–Stokes equation and the Cahn–Hilliard equation. We use the liquid fraction defined all over the computational domain to distinguish between solid and fluid. The model was then employed to predict the impact and freezing dynamics of non-spherical droplets, with the focus on the effects of the aspect ratio, of the contact angle, and of the phase field mobility. It shows that the established model could well capture the axis switching process, that rebounding accompanying the axis switching process could be hindered by solidification, and that larger phase field mobility could smooth drop profile, rendering it round in the axis switching process. [ABSTRACT FROM AUTHOR]

A comprehensive numerical model has been developed, which is capable of predicting the spreading of a high-speed yttria-stabilized zirconia (YSZ) droplet with solidification microstructure formation under a horizontal electric field in plasma spraying processes. The numerical model entails the explicit finite difference solution of the Navier–Stokes equations and the energy balance equation, coupled with the Cahn–Hilliard equation to track the liquid–gas two-phase interface and with a phase field model for solidification microstructure formation involving polycrystalline growth. The electric force is added as a source term in the Navier–Stokes equations, and the fluids are assumed to be perfect dielectrics. The in-house code is written in Fortran and run in parallel. The results reveal that the retracting process could be completely inhibited using a horizontal electric field and that solidification time is greatly reduced. A new mechanism to suppress droplet breakup/splash could be realized, featuring reduction of the rising angle the spreading front makes with a substrate. All the cases show columnar grains within a splat. Besides, the model is validated against experimental results, with gratifying agreement achieved. [ABSTRACT FROM AUTHOR]

In plasma spraying, copious heterogeneous nucleation starts when a molten ceramic droplet spreads on a cold surface under rapid cooling. Some nuclei will survive and grow, eventually forming a splat of grains of distinct crystalline orientations. This paper aims to predict the dynamic process of yttria-stabilized zirconia (YSZ) droplet impact with solidification microstructure formation under various plasma spray conditions. A diffuse interface model was developed to track the evolving liquid–gas and solid–liquid interfaces. Continuously dense YSZ droplet impacts with different impacting angles were conducted, along with a hollow droplet impact. Results reveal that competitive growth among crystals is limited in the planar solidification, and that columnar structure dominates all the tests performed owing to a large thermodynamic driving force, and that given the rapid spreading of YSZ droplets along a solid surface, solidification may be safely assumed to take place mostly after spreading. Besides, typical crystal growth velocities are around 1 m/s, and local equilibrium can be assumed in the bulk. [ABSTRACT FROM AUTHOR]

• The solution of the Cahn-Hilliard equation to track moving boundaries. • A heat source term added in energy equation to trace solidification profile. • Thermal contact resistance studied to find its effect on maximum spread factor. • A supersonic impact of ceramic particles examined. A modified phase-field three-dimensional model has been developed to simulate the spreading of an impacting droplet undergoing solidification. The model is based on the numerical solution of the Cahn-Hilliard equation coupled with the Navier-Stokes equations for fluid flow and the energy balance equation for heat transfer. The solidification profile is tracked by treating the latent heat as a source term in the energy equation, which is modified to work with the Cahn-Hilliard equation. To verify the model, five cases were tested and matched well with experiments. Also, the effect of thermal contact resistance on the maximum spread factor of a solidifying droplet is discussed. One case was taken from practical thermal spraying conditions where a solidifying ceramic droplet spreads on a cold surface at a supersonic impact velocity; computed results are consistent with available measurements. [ABSTRACT FROM AUTHOR]

• Sequential droplet impact with grain growth and impingement is modelled. • Typical velocities of crystal growth are within 2 m/s. • Solidification time of a single splat on a stainless steel substrate is about 0.5 μs. • The undercooling in crystal growth ranges approximately from 150 K to 500 K. A coupled CFD and diffuse interface model was developed to predict the dynamic process of solidification microstructure formation of sequential yttria-stabilized zirconia (YSZ) droplet impact under supersonic plasma spraying. The numerical model relies on the explicit finite difference solution of the Navier-Stokes and energy balance equations, coupled with the Cahn-Hilliard equation, to track liquid-gas interface, and of a phase field model for solidification microstructure formation involving polycrystalline growth to trace solid-liquid interface. Extensive simulations, differing in the status of the first droplet and the impacting parameters of the second one, were carried out. The results reveal that solidification microstructure still follows a columnar pattern if the second droplet lands on the first that is just starting spreading, and that the growth direction around the contact region in the second splat will be obviously skewed by fluid flow if the first has been solidified, owing to earlier and easier nucleation on the top surface of the first splat, thus confirming the epitaxial growth across the splat-splat interface. Computed results are also compared with thermal spray experiments, with gratifying agreement obtained. [ABSTRACT FROM AUTHOR]

• The solution of the Cahn-Hilliard equation to track moving liquid-gas boundaries. • A phase field model for polycrystalline growth used to track solid-liquid interface and grain boundaries. • Supersonic YSZ droplet impact considered. • Convection effect on solidification microstructure investigated. A comprehensive numerical model has been developed, which is capable of representing the impact and spreading of a high-velocity yttria-stabilized zirconia (YSZ) molten droplet with microstructure formation in plasma thermal spraying processes. The numerical model entails the explicit finite difference solution of the Navier-Stokes equations and the energy balance equations, coupled with the Cahn-Hilliard equation to track the liquid-gas two phase interface and with a phase field model for solidification microstructure formation involving the polycrystalline growth. Numerical model procedures are given. The model, after being checked for mesh-independence, was applied to study the spreading and solidification of a high-temperature high-velocity YSZ droplet impinging upon a preheated substrate surface under the conditions typical of supersonic plasma thermal spraying processes. Extensive numerical simulations were carried out and results reveal that the solidification microstructure formed in the spreading droplet consists primarily of columnar grains. Computed results are also compared with thermal spray experiments, and gratifying agreement is obtained. [ABSTRACT FROM AUTHOR]