Search

Enzalutamide (ENZ), marketed under the brand name Xtandi® as a soft capsule, is an androgen receptor signaling inhibitor drug actively used in clinical settings for treating prostate cancer. However, ENZ's low solubility and bioavailability significantly hinder the achievement of optimal therapeutic outcomes. In previous studies, a liquid self-nanoemulsifying drug delivery system (L-SNEDDS) containing ENZ was developed among various solubilization technologies. However, powder formulations that included colloidal silica rapidly formed crystal nuclei in aqueous solutions, leading to a significant decrease in dissolution. Consequently, this study evaluated the efficacy of adding a polymer as a recrystallization inhibitor to a solid SNEDDS (S-SNEDDS) to maintain the drug in a stable, amorphous state in aqueous environments. Polymers were selected based on solubility tests, and the S-SNEDDS formulation was successfully produced via spray drying. The optimized S-SNEDDS formulation demonstrated through X-ray diffraction and differential scanning calorimetry data that it significantly reduced drug crystallinity and enhanced its dissolution rate in simulated gastric and intestinal fluid conditions. In an in vivo study, the bioavailability of orally administered formulations was increased compared to the free drug. Our results highlight the effectiveness of solid-SNEDDS formulations in enhancing the bioavailability of ENZ and outline the potential translational directions for oral drug development. [ABSTRACT FROM AUTHOR]

The purpose of this study is to develop and evaluate a self-nanoemulsifying drug delivery system (SNEDDS) to improve the oral absorption of poorly water-soluble enzalutamide (ENZ). Considering the rapid recrystallization of the drug, based on solubility and crystallization tests in various oils, surfactants and co-surfactants, Labrafac PG 10%, Solutol HS15 80%, and Transcutol P 10%, which showed the most stable particle size and polydispersity index (PDI) without drug precipitation, were selected as the optimal SNEDDS formulation. The optimized SNEDDS formulation showed excellent dissolution profiles for all the drugs released at 10 min of dissolution due to the increased surface area with a small particle size of approximately 16 nm. Additionally, it was confirmed to be stable without significant differences in physical and chemical properties for 6 months under accelerated conditions (40 ± 2 °C, 75 ± 5% RH) and stressed conditions (60 ± 2 °C). Associated with the high dissolutions of ENZ, pharmacokinetic parameters were also greatly improved. Specifically, the AUC was 1.9 times higher and the Cmax was 1.8 times higher than those of commercial products (Xtandi® soft capsule), resulting in improved oral absorption. Taken together with the results mentioned above, the SNEDDS could be an effective tool as a formulation for ENZ and other similar drugs. [ABSTRACT FROM AUTHOR]

To develop a novel solid self-nanoemulsifying drug delivery system (S-SNEDDS) for a water-insoluble oily drug, 1-palmitoyl-2-linoleoyl-3-acetyl-rac-glycerol (PLAG) with improved stability and oral bioavailability, numerous S-SNEDDS were prepared with surfactant, hydrophilic polymer, antioxidant, and calcium silicate (porous carrier) using the spray-drying method. Their physicochemical properties were evaluated using emulsion droplet size analysis, SEM and PXRD. Moreover, the solubility, dissolution, stability, and pharmacokinetics of the selected S-SNEDDS were assessed compared with the drug and a commercial soft capsule. Sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) with the highest drug solubility were selected as surfactant and hydrophilic polymer, respectively. Among the antioxidants tested, only butylated hydroxyanisole (BHA) could completely protect the drug from oxidative degradation. The S-SNEDDS composed of PLAG/SLS/HPMC/BHA/calcium silicate at a weight ratio of 1: 0.25: 0.1: 0.0002: 0.5 provided an emulsion droplet size of less than 300 nm. In this S-SNEDDS, the drug and other ingredients might exist in the pores of carrier and attach onto its surface. It considerably improved the drug stability (about 100 vs. 70%, 60 °C for 5 d) and dissolution (about 80 vs. 20% in 60 min) compared to the commercial soft capsule. Moreover, the S-SNEDDS gave higher AUC, Cmax, and Tmaxvalues than the commercial soft capsule; in particular, the former improved the oral bioavailability of PLAG by about 3-fold. Our results suggested that this S-SNEDDS provided excellent stability and oral bioavailability of PLAG. Thus, this S-SNEDDS would be recommended as a powerful oral drug delivery system for an oily drug, PLAG. [ABSTRACT FROM AUTHOR]

The objective of this study was to develop a novel prasugrel base microsphere-loaded tablet (PBMST) with enhanced stability as a bioequivalent to the commercial prasugrel hydrochloride-loaded tablet. Numerous prasugrel base-loaded microspheres were prepared with hydroxypropylmethyl cellulose (HPMC), colloidal silica and various acidifying agents using a spray-drying process, and the physicochemical properties, solubility and stability were investigated. The PBMSTs were prepared and their dissolution, pharmacokinetics in beagle dogs and stability were evaluated compared to commercial prasugrel hydrochloride-loaded tablets. Among the acidifying agents tested, phosphoric acid provided the greatest increase in drug solubility, by as much as 110-fold. The prasugrel base-loaded microspheres composed of prasugrel base, HPMC, colloidal silica and phosphoric acid at a weight ratio of 10/10/5/2.5 provided an amorphous drug and reduced particle size of about 11.3 μm. Moreover, it exhibited excellent solubility and improved stability compared to prasugrel base and hydrochloride. Moreover, PBMST drug dissolution was improved in comparison to the prasugrel base-loaded tablet (PBT), with similar dissolution to the commercial prasugrel hydrochloride-loaded tablet at pH 1.2 and 4.0. PBMST provided significantly higher plasma concentrations of AUC and C max in beagle dogs compared to PBT. In particular, the AUC of PBMST was approximately four times greater than PBT, leading to improved oral bioavailability. There were no significant differences observed for all pharmacokinetic parameters between PBMST and the commercial prasugrel hydrochloride-loaded tablet, suggesting their bioequivalence in beagle dogs. Furthermore, the prepared PBMSTs were stable for at least six months. Therefore, this novel prasugrel base microsphere-loaded tablet could be a potential alternative for enhancing the stability and bioavailability of prasugrel. [ABSTRACT FROM AUTHOR]

The purpose of this study was to develop HM30181 mesylate salt (HM30181M)-loaded microcapsules as a novel P-glycoprotein inhibitor for enhancing the oral absorption of paclitaxel. The effect of various carriers including hydrophilic polymers and solvents on the solubility of HM30181M were evaluated. Among the hydrophilic polymers and solvents tested, HPMC and methylene chloride (and ethanol) provided the highest HM30181M solubility. Numerous HM30181M-loaded microcapsules were prepared with HPMC, silicon dioxide and acidifying agents using a spray-drying technique, and their solubility, dissolution and physicochemical properties were evaluated. Furthermore, a pharmacokinetic study was performed after oral administration of paclitaxel alone, simultaneously with HM30181M powder or HM30181M-loaded microcapsules to rats. Among the acidifying agents investigated, phosphoric acid provided the best improvement in the solubility and dissolution of HM30181M. Moreover, the microcapsule composed of HM30181M, HPMC, silicon dioxide and phosphoric acid at a weight ratio of 3:6:3:2 remarkably enhanced the solubility and dissolution of HM30181M compared with the HM30181M powder alone. The microcapsules were spherical in shape, had a reduced particle size of about 7 μm, and contained HM30181M in an amorphous state. Furthermore, this microcapsule significantly enhanced HM30181M absorption, making it about 1.7-fold faster and 1.6-fold greater after simultaneous administration, leading to about 70- and 2-fold improved oral bioavailability of paclitaxel compared with paclitaxel alone and the simultaneous administration with HM30181M powder, respectively. Thus, this novel microcapsule could be a potential candidate for effective P-glycoprotein inhibition during oral administration of paclitaxel. [ABSTRACT FROM AUTHOR]

Low aqueous solubility and poor bioavailability are major concerns in the development of oral solid-dosage drug forms. In this study, we fabricated surface-attached solid dispersion (SASD) to enhance the solubility, bioavailability, and photostability of methotrexate (MTX), a highly lipophilic and photo-unstable drug. Several MTX-loaded SASD formulations were developed for spray-drying using water as the solvent, and were investigated for their aqueous solubility and dissolution kinetics. An optimized ternary SASD formulation composed of MTX/ sodium carboxymethyl cellulose (Na-CMC)/sodium lauryl sulfate (SLS) at 3/0.5/0.5 (w/w) had 31.78-fold and 1.88-fold higher solubility and dissolution, respectively, than MTX powder. For SASD, the in vivo pharmacokinetic parameters AUC and Cmax were 2.90- and 3.41-fold higher, respectively, than for the MTX powder. Solid-state characterizations by differential scanning calorimetry and X-ray diffraction revealed that MTX exists in its crystalline state within the spray-dried SASD. The MTX-loaded SASD formulation showed few physical changes with photostability testing. Overall, the results indicate that the spray-dried MTX-loaded SASD formulation without organic solvents enhances the solubility and oral bioavailability of MTX without a significant deterioration of its photochemical stability. [ABSTRACT FROM AUTHOR]

The purpose of this study was to develop a novel dabigatran etexilate hemisuccinate (DEH) salt-loaded polycap with bioequivalence to the dabigatran etexilate mesylate (DEM)-loaded commercial product. DEH prepared with dabigatran etexilate base (DE) and succinic acid was less hygroscopic but less soluble than DEM. Numerous micronized DEHs and DEH-loaded solid dispersions were prepared employing the spiral jet-milling and spray-drying techniques, respectively. Among the formulations prepared, a micronized DEH prepared with the injection air at 1.5 bar and the grinding air at 2 bar, and a DEH-loaded solid dispersion prepared with 6 g HPMC most improved the drug solubility, respectively. Moreover, the micronized DEH provided more increased drug solubility and dissolution compared with the solid dispersion, even though its drug solubility was still lower than that of DEM. Unlike the situation in other studies, the enhanced solubility and dissolution of DEH was more due to particle size reduction than to a change to the amorphous form. The micronized DEH prepared with Myrj 52S had greater drug solubility than preparations with other surfactants. Among the organic acids investigated, only fumaric acid (128.8 mg) showed a similar pattern in pH changes to the DEM-loaded commercial product. Furthermore, in order to make the environment acidic while preventing the direct contact of the drug with fumaric acid, the polycap was composed of a tablet containing the micronized DEH, Myrj 52S and other ingredients, and separate fumaric acid. This micronized DEH-loaded polycap was dissolution- and bio-equivalent to the DEM-loaded commercial product in beagle dogs. Thus, the novel micronized DEH-loaded polycap would be a promising alternative to the DEM-loaded commercial product. [ABSTRACT FROM AUTHOR]