Search

In a present paper methods of concentration of Ce(III) from aqueous solutions onto synthetic polymer adsorbent. The sorption-photometric determination of the microquantities of cerium ions by new polymeric chelating sorbent, modified with dithizone has been studied. Sorption process was carried out under static conditions. Optimal characteristics of the sorption process: influence of pH, time of contact, effect of the initial concentration of metal, influence of ionic strength were studied. pH for extracting Ce is 5; the residence time is 210 min. Optimal ionic strength was achieved at a value of μ =0.6. The sorption capacity of the sorbent and the percentage recovery were determined from the difference in the initial and final concentrations of cerium(III) in the solution. The sorbability of cerium(III) ions was 91.38%, sorption capacity of sorbent with respect to cerium ions is 682.85 mg∙g-1. At the final stage, a desorption process was carried out using different (organic and mineral) acids with the same concentrations (0.5, 1.0, 1.5, and 2.0 M). 1M HCl has the highest eluting ability with respect to cerium (III) ions. Sorbent modified with dithizone based on a styrene-maleic anhydride (SMA) copolymer is proposed as synthetic sorbent with the best analytical properties (high sorption capacity, residence time 3 h with respect to cerium ions). Multiple use of the regenerated sorbent for concentration is possible. The developed techniques can be used to determine Ce(III) in standard samples, soil and tap water.

The article has studied the removal of U(VI) chelatoforming sorbent based on anhydride with styrene chemically modified by dithizone. It was established that uranium is sorbed to its maximum at pH 5 (ammonia-acetate buffer) and concentration 1428 mg/dm3. Statistical sorption capacity—1249 mg/g. It was cleared out that ionic force up to 0.6 did not affect sorption and its consecutive increase at first gradually and then sharply decrease sorption. It is established that when using different mineral acids (HCIO4, H2SO4, HNO3, HCI) maximum desorption is observed in perchloric acid. The technique for concentration of U(VI) in sea water has been developed including sorption, elution and definition in the desorption solution.

The ability of a chelating sorbent based on maleic anhydride–styrene copolymer to take up uranium was studied. The sorbent was prepared by modification of the copolymer with Norsulfazolum in the presence of formaldehyde. The dependence of the sorption capacity on the solution acidity was studied. At pH 5, the degree of sorption passes through a maximum. As the uranium concentration in the solution is increased, the amount of the sorbed metal increases, reaching a maximum at a concentration of 8 × 10–3 M (SC = 1253 mg g–1). The influence of the solution ionic strength on the uranium sorption was examined. The ionic strength of up to 0.4 M does not affect the sorption, but as the ionic strength is increased further, the sorption decreases, first gradually and then sharply. The desorption of the sorbed uranium ions was studied. The effect of mineral and organic acids on the uranium desorption was examined. The desorption is maximal with HClO4.

In this paper the results of a study on the extraction and concentration of micro-quantities of uranium (VI) with a polymeric chelating sorbent with fragments of N, N and#39;diphenylguanidine is discussed. There was studied a static sorption capacity on K+ ions ((SSC = 9.3 mmol / g) and there were determined the ionization constants of ionogenic groups ( =3.97; =8.47) by potentiometric titration. The optimal conditions of the sorption of elements (pHopt, sorption time - τ, the influence of ionic strength - μ) were determined by the dependence of the sorption capacity (SC, mg/g) on the parameter being studied; the sorption capacity of the sorbent (SC) was determined from the saturation curve constructed under optimal sorption conditions. The maximum degree of extraction of uranium by sorbents is achieved from solutions with pH 5. Sorption equilibrium is achieved within 2 hours of contact of the solution with the sorbent. With an increase in the concentration of the uranyl ion in the solution, the amount of the sorbed metal increases, and at a concentration of 8•10–3 mol/l, it becomes maximal (pH = 5, = 8•10–3 mol/l, Vgen = 20 ml, msorb. = 0.05 g, SC = 1258 mg/g). Limits of detection (3, n=20) are 13.9 ng/ml. The effect of various mineral acids(HClО4, H2SО4, HNО3, HCl) with the same concentrations on the desorption of uranium (VI) from the sorbent was studied. The developed technique was applied to determine uranium in oil sludge.