Search

Airborne synthetic aperture radar (Airborne SAR) can accurately locate key targets and regions by using the flight parameters of the aircraft and the relative position information between the aircraft and the target which can be obtained from the airborne positioning and orientation system (POS). In the course of flight, the aircraft will deviate from the ideal flight path due to atmospheric turbulence, which results in the calculation deviating from the actual target position. In order to improve the target positioning accuracy, it is necessary to study the influence of aircraft motion error on the target positioning error. This study discusses the positioning accuracy of single-view airborne SAR from the perspective of linear Range-Doppler algorithm (RDA), and deduces the multi-view airborne SAR positioning error transfer model based on the multi-view airborne SAR positioning model. Based on these, we analyze the main factors that affect the positioning accuracy of the two positioning methods in detail and quantitatively reveal the mechanism by which the multi-view airborne SAR positioning method can improve the target positioning accuracy compared with the single-view airborne SAR positioning method; we also solve the problem of course planning for multi-view airborne SAR optimal positioning. The research results can provide theoretical support for the analysis of factors influencing positioning error and the positioning error correction of airborne SAR. [ABSTRACT FROM AUTHOR]

Standard synthetic aperture radar (SAR) processors use analytically derived transfer functions that rely on the assumption of hyperbolic range histories of monostatic SARs with straight flight paths. The range histories for bistatic SARs are no longer hyperbolic and simple analytic transforms do not exist. In this article, a bistatic subsection hyperbolic range history (BS-HRH) model is proposed and based on it; a generic processing scheme for bistatic SAR imaging is given with which simple analytic transforms for standard monostatic SARs can still be applied. One-dimensional and two-dimensional signal-level simulations are done using the orbit parameters of Envisat and a classic pendulum-like bistatic configuration under different baselines. It is found that the proposed BS-HRH algorithm performs well for spaceborne bistatic SARs even with extreme bistatic configurations and/or very high azimuth resolution. Compared with the existing analytical ‘method of series reversion (MSR)’ and the numerical ‘NuSAR’ algorithm, easy implementation, high efficiency and accuracy, and mathematical simplicity are among the advantages of the proposed algorithm. The approach of BS-HRH has the potential to solve the general HRH-deviation problem for other new SARs with more complex imaging geometry. [ABSTRACT FROM PUBLISHER]

Geolocation using spaceborne synthetic aperture radar (SAR) is essential for imagery applications, and high performance geolocation methods need to be developed to promote SAR imagery applications. Starting from the SAR imaging principle, this paper reveals and analyzes two basic characteristics of SAR imaging geometry, and demonstrates the rationality of the two characteristics. On this basis, a high-precision and fast geolocation method is proposed. We conducted a precision analysis on four SAR satellites (Germany's TerraSAR-X, Italy's COSMO-SkyMed, Japan's ALOS-PalSAR and Canada's Radarsat-2 satellites), and the results show that the precision of the proposed method meets practical needs. We then used TerraSAR-X SpotLight SAR real data to implement the fast geolocation, and found from performance evaluation that the computation cost is greatly reduced while high geolocation accuracy is maintained. We thus verified the efficiency and accuracy of the proposed method. [ABSTRACT FROM AUTHOR]

The application of SAR tomography (TomoSAR) on the urban infrastructure and other man-made buildings has gained increasing popularity with the development of modern high-resolution spaceborne satellites. Urban tomography focuses on the separation of the overlaid targets within one azimuth-range resolution cell, and on the reconstruction of their reflectivity profiles. In this work, we build on the existing methods of compressive sensing (CS) and generalized likelihood ratio test (GLRT), and develop a multiple scatterers detection method named CS-GLRT to automatically recognize the number of scatterers superimposed within a single pixel as well as to reconstruct the backscattered reflectivity profiles of the detected scatterers. The proposed CS-GLRT adopts a two-step strategy. In the first step, an L1-norm minimization is carried out to give a robust estimation of the candidate positions pixel by pixel with super-resolution. In the second step, a multiple hypothesis test is implemented in the GLRT to achieve model order selection, where the mapping matrix is constrained within the afore-selected columns, namely, within the candidate positions, and the parameters are estimated by least square (LS) method. Numerical experiments on simulated data were carried out, and the presented results show its capability of separating the closely located scatterers with a quasi-constant false alarm rate (QCFAR), as well as of obtaining an estimation accuracy approaching the Cramer–Rao Low Bound (CRLB). Experiments on real data of Spotlight TerraSAR-X show that CS-GLRT allows detecting single scatterers with high density, distinguishing a considerable number of double scatterers, and even detecting triple scatterers. The estimated results agree well with the ground truth and help interpret the true structure of the complex or buildings studied in the SAR images. It should be noted that this method is especially suitable for urban areas with very dense infrastructure and man-made buildings, and for datasets with tightly-controlled baseline distribution. [ABSTRACT FROM AUTHOR]

Spaceborne multistatic synthetic aperture radar (SAR) tomography (SMS-TomoSAR) systems take full advantage of the flexible configuration of multistatic SAR in the space, time, phase, and frequency dimensions, and simultaneously achieve high-precision height resolution and low-deformation measurement of three-dimensional ground scenes. SMS-TomoSAR currently poses a series of key issues to solve, such as baseline optimization, spatial transmission error estimation and compensation, and the choice of imaging algorithm, which directly affects the performance of height-dimensional imaging and surface deformation measurement. This paper explores the impact of baseline distribution on height-dimensional imaging performance for the baseline optimization issue, and proposes a feasible baseline optimization method. Firstly, the multi-base multi-pass baselines of an SMS-TomoSAR system are considered equivalent to a group of multi-pass baselines from monostatic SAR. Secondly, we establish the equivalent baselines as a symmetric-geometric model to characterize the non-uniform characteristic of baseline distribution. Through experimental simulation and model analysis, an approximately uniform baseline distribution is shown to have better SMS-TomoSAR imaging performance in the height direction. Further, a baseline design method under uniform-perturbation sampling with Gaussian distribution error is proposed. Finally, the imaging performance of different levels of perturbation is compared, and the maximum baseline perturbation allowed by the system is given. [ABSTRACT FROM AUTHOR]