Search

Ripening is one of the most important transformations that fruits and vegetables suffer, from an unripe to a ripe stage. In this study, it was followed up and analyzed the variations in the composition of tomato fruits at different ripening stages (green or unripe, orange or middle ripe, red or ripe and brown or overripe). The results obtained from the Raman measurements carried out showed a change in the composition of tomato fruits in the transit from green to brown. The analysis confirmed an increase of carotenoids from an unripe to a ripe stage of these fruits, being lycopene the characteristic carotenoid of the optimum ripe stage. The presence of chlorophyll and cuticular waxes decrease from the unripe to the ripe stage. Moreover, the relative intensity of phytofluene, a transition compound in the carotenoid biosynthetic pathway, is higher in the orange or middle ripening stage. The results obtained in-situ, without cutting and handling the tomato fruits, by means of a portable Raman spectrometer offered the same information that can be achieved using a more expensive and sophisticated confocal Raman microscope., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Clean air is considered to be a basic requirement of human health and well-being. An increasing range of adverse health effects has been linked to air pollution, at ever-lower concentrations. This research shows the newly developed Structural and Chemical Analyzer (SCA) to be a successful combination of Raman spectroscopy and scanning electron microscope-energy dispersive X-rays that opens up new insight into the composition of particulate matter (PM). The results obtained with soil and lichen samples demonstrate the capability of the technique to obtain elemental and molecular information of every single atmospheric PM focused at the micrometer and submicrometer levels. The SCA approach permitted the individual PM analysis, allowing the identification of the molecular (most commonly as sulphides, sulphates, carbonates, or oxides) form in which several hazardous metals (Zn, Pb, Cu, etc.) are evolved into potentially inhalable PM. During the present research, the synchronization of both techniques at a time revealed the morphological, elemental, and molecular forms of metal-rich PM, avoiding some analysis precautions and making the sample preparation and measurement steps more dynamic. In addition, the thermodynamic simulations carried out with the information obtained were helpful to differentiate whether the PM may be retained in the alveoli (i.e., galena) or if it may be dissolved and pass into the bloodstream (i.e., plattnerite).

Tomato (Solanum lycopersicum) fruit samples, in two ripening stages, ripe (red) and unripe (green), collected from a cultivar in the North of Spain (Barrika, Basque Country), were analyzed directly, without any sample pretreatment, with two different Raman instruments (portable spectrometer coupled to a micro-videocamera and a confocal Raman microscope), using two different laser excitation wavelengths (514 and 785 nm, only for the confocal microscope). The combined use of these laser excitation wavelengths allows obtaining, in a short period of time, the maximum spectral information about the main organic compounds present in this fruit. The major identified components of unripe tomatoes were cutin and cuticular waxes. On the other hand, the main components on ripe tomatoes were carotenes, polyphenoles and polysaccharides. Among the carotenes, it was possible to distinguish the presence of lycopene from β-carotene with the help of both excitation wavelengths, but specially using the 514 nm one, which revealed specific overtones and combination tones of this type of carotene., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Colonisation of wall paintings by microorganisms and other organisms is a well-known problematic phenomenon. Besides taxonomic identification of the biodeteriogen, it is essential to evaluate the consequences of the colonisation, e.g., unsightly coloured patinas. This work proposes new methodology for characterisation of the nature of the main carotenoids and their distribution in brown stains or patinas of a deteriorated wall painting on the north wall of the atrium of Marcus Lucretius House (Pompeii, Italy). Characterisation of the brown patinas and surrounding areas (plaster and polychromy) from the wall painting started with in situ screening using, mainly, a portable Raman instrument with a handheld FTIR (DRIFTS sampling interface) in order to select the sampling areas suitable for further analysis in the laboratory. Two wall painting fragments were then analysed in the laboratory in two steps. First, microscopic observations (SEM and phase-contrast microscopy) were used to determine whether biodeteriogens were present in the samples. In a second step, confocal Raman microscopy (785 and 514 nm excitation lasers) was used to characterise the main biogenic compounds of the brown stains. Because of the resonance Raman effect (514 nm excitation laser), it was possible to obtain reliable Raman features to assign not only the nature of the main biogenic pigments (carotenoids) present in the stains, but also their spatial conformation. Moreover, Raman confocal applications, for example, Raman imaging and depth profiling were also used in a first attempt to determine the distribution of biosynthesised carotenoids in the stains, and to determine the thickness of the brown patinas.

Mining activities provide a good source of minerals of different nature. On the one hand, the primary minerals for whose formation a geological time-scale is required. On the other hand, secondary minerals, formed from removed products after the earlier weathering and alteration states. These are characteristic of the local geology and the environment context that commonly appears due to the low chemical stability of their original primary minerals. This work shows how quickly the reactions promoting secondary minerals may have taken place, due to the fact that these were found in newly formed solid materials called efflorescences. To achieve this purpose, the sampling is crucial. It was carried out in such a way that tried to guarantee that the samples collected consisted in the very top soil matter (first 2 cm depth). Thus, unlike the deeper soil, the material analysed may have been newly formed due to the interactions that they had with the place weathering agents (i.e. air oxygen, humidity, and microbial activities). Raman spectroscopy has emerged as a good and fast non-destructive technique that provides molecular information of the local mineralogy without the need of any pre-treatment of the samples. At the same time, the work looked for information on the variety of non-stable lead and-or zinc containing minerals due to the possible health and environmental risks they convey. Among the different minerals identified, 16 were of primary nature while 23 may be classified as secondary minerals, probably formed in the last decades as the result of the extractive activities., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Composition of moonmilk deposits located in different zones of the tourist Dolomite Cave of Pozalagua (Karrantza, Basque Country, North of Spain) was established by Raman spectroscopy. The deposits were located in column bases and detached rocks near a gour full of water or a dripping zone. Hydromagnesite (Mg(5)(CO(3))(4)(OH)(2).4H(2)O) with a strong Raman band at 1116 cm(-1) and weaker ones at 1522vw, 1487vw, 1452vw, 756w, 727w, 466w, 434w, 371w, 327m, 291w, 258w, 247vw and 230 m cm(-1) was found as the main component of the moonmilk. Aragonite is the unique calcium carbonate compound that sometimes composes the moonmilk but always together with the hydromagnesite. Among non-carbonate minerals, some nitrates (nitrocalcite, niter, nitromagnesite, nitratine and gwihabaite) and sulphates (arkanite) were also identified as minor compounds. Most of the deposits were matt white and pasty, but occasionally some samples appear greyish on the surface. In these samples, carbon particles were also found, apart from the above, and Raman shift changes were observed in the hydromagnesite spectra. Apart from the elements involved in the mentioned minerals, Si, Fe, Mn, Zn and Ti were identified by X-ray microfluorescence as trace elements and the results were correlated with mineral compositions found by Raman measurements. Furthermore, quantification of the soluble salts of moonmilk deposits was carried out by ionic chromatography and the results were chemometrically treated to find correlations among soluble ions and the composition of the mineral phases spectroscopically characterised.

In archaeometry, one of the main concerns is to extract information from an art object, without damaging it. Raman spectroscopy is being applied in this research field with recent developments in mobile instrumentation facilitating more routine analysis. This research paper evaluates the performances of five mobile Raman instruments (Renishaw RA100, Renishaw Portable Raman Analyser RX210, Ocean Optics RSL-1, Delta Nu Inspector Raman, Mobile Art Analyser--MArtA) in three different laboratories. A set of samples were collected, in order to obtain information on the spectral performances of the instruments including: spectral resolution, calibration, laser cut-off, the ability to record spectra of organic and inorganic pigments through varnish layers and on the possibilities to identify biomaterials. Spectra were recorded from predefined regions on a canvas painting to simulate the investigation of artworks and the capabilities to record spectra from hardly accessible areas was evaluated.

Scientific studies of the pigments used in the manufacturing process of some pigmented wallpapers are presented in this work. Non-destructive micro-Raman spectroscopy was selected for this purpose, and provides important information about how the 19th century wallpaper industry incorporated new materials in their works and designs. At the same time, analysis can help to date the samples of uncatalogued wallpapers. Chrome yellow, burnt Sienna, Prussian blue, ultramarine blue, red lead, carbon black, calcium carbonate, red iron oxide and a red organic pigment were identified. According to the palette used, as well as to the manufacturing process, the wallpapers in this study can be dated to the second half of the 19th century.

Raman micro-probe spectroscopy has been applied to the analysis of a non catalogued hand-crafted wallpaper during its restoration process. The analysis has been totally non-destructive without the necessity of taking any sample. The artwork showed a great chromatic palette having been detected the presence of calcium carbonate, Prussian blue, ultramarine blue, gypsum (CaSO4.2H2O), minium (Pb3O4), vermilion (HgS), chrome orange (CaCO3), chrome yellow (PbCrO4), barium sulphate and carbon black (C). From the spectroscopic analysis the date of its manufacturing has been set between 1828 and 1830, introduction of chrome yellow and orange, as well as artificial ultramarine blue, and 1840, when continuous industrial wallpapers were extensively manufactured in Europe.