Search

Investigating the division of coal spontaneous combustion stages and the selection of indicator gases is significant to the safe production of coal mines. In this study, the characteristic temperature of coal spontaneous combustion, the generation law of indicator gases, the combustion process, and the division of the combustion stages of coal samples taken from Hongqingliang (HQL) and Dayan (DY) mines were investigated using thermogravimetric analysis experiment, indicator gas detection experiment, and coal oxidation spontaneous combustion experiment. The results of the thermogravimetric analysis experiment showed that the pyrolysis temperatures of the HQL and DY coals were 115.76°C and 131.80°C, and the ignition temperatures were 337.74°C and 360.18°C, respectively. The indicator gas detection results showed that the first-appearance temperature of C2H4 was 85°C for the HQL and DY coals, whereas the first-appearance temperature of C2H6 varied: 115°C for the HQL coal and 130°C for the DY coal. The first-appearance temperatures of C2H2 were 180°C and 195°C for the HQL and DY coals, respectively. The experiments on coal oxidation spontaneous combustion showed that the spontaneous combustion period of the HQL and DY coals were 35.45 and 42.3 days, respectively. The heating process during combustion could be divided into four stages: a latent period of spontaneous combustion, a slow spontaneous heating period, an accelerated spontaneous heating period, and a period of combustion. The critical temperature of each stage showed a good correlation with the incipient temperature of the indicator gases, namely C2H2, C2H4, and C2H6, and the appearance of the above gases can be used to characterize the degree of spontaneous combustion of coal., Competing Interests: The authors have declared that no competing interests exist.

The erosion of igneous rocks affects the structural and spontaneous combustion characteristics of coal. A series of tests were conducted, including programmed heating, thermogravimetric analysis, FT-IR spectroscopy, low-temperature nitrogen adsorption, and pressed mercury experiments on samples from primary coal and coal eroded by igneous rocks from the Tashan Mine and Xiaonan Mine within the same coal seam. Based on these experiments, we analyzed various properties of coal, such as the oxidation characteristics, spontaneous combustion limit, active functional group content, chemical structure, and pore structure, from both macroscopic and microscopic perspectives. The results indicated significant trends after the erosion of igneous rocks: (1) there were increases in the oxygen consumption rate, as well as the CO and CO2 release rates; (2) the upper limit of air leakage intensity increased, the minimum thickness of floating coal decreased, and the lower limit of oxygen volume fraction decreased; (3) there was a decrease in the activation energy required for coal ignition; (4) there was a decrease in the active functional group content while improving the structural stability; and (5) there were the alterations in the pore structure of coal. These promoted the oxidation reactions between oxygen and the active groups within the coal matrix, increasing the propensity for spontaneous combustion, particularly in the igneous rocks with low oxidation activity. [ABSTRACT FROM AUTHOR]

The spontaneous combustion of coal in goaf areas is a significant natural disaster encountered during coal mining operations. To investigate the oxygen consumption characteristics of different coal types, we conducted TG experiments and closed oxygen consumption experiments using seven coal samples exhibiting various degrees of metamorphism. The findings revealed the following key observations: During the oxidation combustion process of coal, the absorbed heat originates from the physical and chemical adsorption of coal and oxygen. The first exothermic peak on the DSC curve represents the maximum combustion temperature of volatile matter and signifies the initiation of coal burning. Coal with higher ignition temperatures is less prone to spontaneous combustion. Analyzing the thermogravimetric curves, we observed that the ignition temperatures of 15# coal and 8+9# coal predominantly extracted from Duanwang Coal Mine are higher compared to the ignition temperature of the 4# coal seam (known for its susceptibility to spontaneous combustion) in Jiudaoling Coal Mine, Liaoning. This observation aligns with their nonspontaneous combustion characteristics. In the closed oxygen consumption experiment, we determined the volume oxygen consumption attenuation coefficients for the main mining areas' 8+9# and 15# coal seams as 3.9001 × 10 − 4 and 3.83559 × 10 − 4 , respectively. Additionally, the critical oxygen consumption concentrations were measured as 15.71% and 16.78%. The shortest spontaneous combustion periods were determined to be 119.24 days and 121.25 days, respectively, for the aforementioned coal seams. To mitigate spontaneous combustion, the addition of inhibitors is necessary. The selection of an appropriate inhibitor depends on the increase in ignition activation energy. Notably, coal samples treated with a 15% MgCl2 inhibitor exhibited the highest increase in ignition activation energy. Hence, we concluded that a 15% MgCl2 inhibitor is the most suitable ratio for preventing spontaneous combustion. [ABSTRACT FROM AUTHOR]