Search

Wet heat treatment is a commonly applied method in the food and medical industries for the inactivation of microorganisms, and bacterial spores in particular. While many studies have delved into the mechanisms underlying wet heat killing and spore resistance, little attention has so far been dedicated to the capacity of spore-forming bacteria to tune their resistance through adaptive evolution. Nevertheless, a recent study from our group revealed that a psychrotrophic strain of the Bacillus cereus sensu lato group (i.e. Bacillus weihenstephanensis LMG 18989) could readily and reproducibly evolve to acquire enhanced spore wet heat resistance without compromising its vegetative cell growth ability at low temperatures. In the current study, we demonstrate that another B. cereus strain (i.e. the mesophilic B. cereus sensu stricto ATCC 14579) can acquire significantly increased spore wet heat resistance as well, and we subjected both the previously and currently obtained mutants to whole genome sequencing. This revealed that five out of six mutants were affected in genes encoding regulators of the spore coat and exosporium pathway (i.e. spoIVFB, sigK and gerE), with three of them being affected in gerE. A synthetically constructed ATCC 14579 ΔgerE mutant likewise yielded spores with increased wet heat resistance, and incurred a compromised spore coat and exosporium. Further investigation revealed significantly increased spore DPA levels and core dehydration as the likely causes for the observed enhanced spore wet heat resistance. Interestingly, deletion of gerE in Bacillus subtilis 168 did not impose increased spore wet heat resistance, underscoring potentially different adaptive evolutionary paths in B. cereus and B. subtilis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interest or personal relationships that could have appeared to influence the work reported in this article., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The bacterium Moorella thermoacetica produces the most heat-resistant spores of any spoilage-causing microorganism known in the food industry. Previous work by our group revealed that the resistance of these spores to wet heat and biocides was lower when spores were produced at a lower temperature than the optimal temperature. Here, we used electron microcopy to characterize the ultrastructure of the coat of the spores formed at different sporulation temperatures; we found that spores produced at 55 °C mainly exhibited a lamellar inner coat tightly associated with a diffuse outer coat, while spores produced at 45 °C showed an inner and an outer coat separated by a less electron-dense zone. Moreover, misarranged coat structures were more frequently observed when spores were produced at the lower temperature. We then analyzed the proteome of the spores obtained at either 45 °C or 55 °C with respect to proteins putatively involved in the spore coat, exosporium, or in spore resistance. Some putative spore coat proteins, such as CotSA, were only identified in spores produced at 55 °C; other putative exosporium and coat proteins were significantly less abundant in spores produced at 45 °C. Altogether, our results suggest that sporulation temperature affects the structure and protein composition of M. thermoacetica spores.

The exosporium is the outermost spore layer of some Bacillus and Clostridium species and related organisms. It mediates the interactions of spores with their environment, modulates spore adhesion and germination, and has been implicated in pathogenesis. In Bacillus cereus , the exosporium consists of a crystalline basal layer, formed mainly by the two cysteine-rich proteins CotY and ExsY, surrounded by a hairy nap composed of glycoproteins. The morphogenetic protein CotE is necessary for the integrity of the B. cereus exosporium, but how CotE directs exosporium assembly remains unknown. Here, we used super-resolution fluorescence microscopy to follow the localization of SNAP-tagged CotE, CotY, and ExsY during B. cereus sporulation and evidenced the interdependencies among these proteins. Complexes of CotE, CotY, and ExsY are present at all sporulation stages, and the three proteins follow similar localization patterns during endospore formation that are reminiscent of the localization pattern of Bacillus subtilis CotE. We show that B. cereus CotE guides the formation of one cap at both forespore poles by positioning CotY and then guides forespore encasement by ExsY, thereby promoting exosporium elongation. By these two actions, CotE ensures the formation of a complete exosporium. Importantly, we demonstrate that the assembly of the exosporium is not a unidirectional process, as previously proposed, but occurs through the formation of two caps, as observed during B. subtilis coat morphogenesis, suggesting that a general principle governs the assembly of the spore surface layers of Bacillaceae IMPORTANCE Spores of Bacillaceae are enveloped in an outermost glycoprotein layer. In the B. cereus group, encompassing the Bacillus anthracis and B. cereus pathogens, this layer is easily recognizable by a characteristic balloon-like appearance and separation from the underlying coat by an interspace. In spite of its importance for the environmental interactions of spores, including those with host cells, the mechanism of assembly of the exosporium is poorly understood. We used super-resolution fluorescence microscopy to directly visualize the formation of the exosporium during the sporulation of B. cereus , and we studied the localization and interdependencies of proteins essential for exosporium morphogenesis. We discovered that these proteins form a morphogenetic scaffold before a complete exosporium or coat is detectable. We describe how the different proteins localize to the scaffold and how they subsequently assemble around the spore, and we present a model for the assembly of the exosporium., (Copyright © 2021 Lablaine et al.)

Bacterial spores are resistant to physical and chemical insults, which makes them a major concern for public health and industry. Spores help bacteria to survive extreme environmental conditions that vegetative cells cannot tolerate. Spore resistance and dormancy are important properties for applications in medicine, veterinary health, food safety, crop protection and other domains. The resistance of bacterial spores results from a protective multilayered structure and from the unique composition of the spore core. The mechanisms of sporulation and germination, the first stage after breaking of dormancy, and organization of spore structure have been extensively studied in Bacillus species. This review aims to illustrate how far the structure, composition and properties of spores are shaped by the environmental conditions in which spores form. We look at the physiological and molecular mechanisms underpinning how sporulation media and environment deeply affect spore yield, spore properties like resistance to wet heat and physical and chemical agents, germination and further growth. For example, spore core water content decreases as sporulation temperature increases, and resistance to wet heat increases. Controlling the fate of Bacillus spores is pivotal to controlling bacterial risks and process efficiencies in, for example, the food industry, and better control hinges on better understanding how sporulation conditions influence spore properties.

Temperatures encountered in cannery allow growth of thermophilic spore-forming bacteria, including the strictly anaerobe Moorella thermoacetica, which grows optimally from 55 °C to 65 °C and is the main cause of spoilage of low-acid canned foods (LACFs) at high temperature. Resistance to wet-heat, biocides and UV-C of spores formed at different temperatures was assessed either for a selection of M. thermoacetica strains or for the strain M. thermoacetica ATCC 39073. Spores formed at 45 °C were significantly more sensitive to wet-heat than spores produced at 55 °C, while spores produced at 65 °C were as heat-resistant as spores produced at 55 °C. Spores of M. thermoacetica ATCC 39073 produced at 45 °C were significantly less resistant to peracetic acid than spores formed at 55 °C, while no difference in sensitivity to H 2 O 2 or to UV-C treatment was observed whatever the sporulation temperature. However, both types of treatment enabled at least a 3.3 log CFU/mL reduction of M. thermoacetica ATCC 39073 spores. M. thermoacetica spores thus showed higher resistance properties when sporulation temperature was close to optimal growth temperature. These findings suggest food spoilage due to M. thermoacetica species could be controllable by holding temperatures below optimal growth temperature from the blanching step to the can filling step., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Spore-forming bacteria are able to grow under a wide range of environmental conditions, to form biofilms and to differentiate into resistant forms: spores. This resistant form allows their dissemination in the environment; consequently, they may contaminate raw materials. Sporulation can occur all along the food chain, in raw materials, but also in food processes, leading to an increase in food contamination. However, the problem of sporulation during food processing is poorly addressed and sporulation niches are difficult to identify from the farm to the fork. Sporulation is a survival strategy. Some environmental factors are required to trigger this differentiation process and others act by modulating it. The efficiency of sporulation is the result of the combined effects of these two types of factors on vegetative cell metabolism. This paper aims to explain and help identify sporulation niches in the food chain, based on features of spore-former physiology., (Copyright © 2016 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.)

The Bacillus cereus spore surface layers consist of a coat surrounded by an exosporium. We investigated the interplay between the sporulation temperature and the CotE morphogenetic protein in the assembly of the surface layers of B. cereus ATCC 14579 spores and on the resulting spore properties. The cotE deletion affects the coat and exosporium composition of the spores formed both at the suboptimal temperature of 20°C and at the optimal growth temperature of 37°C. Transmission electron microscopy revealed that ΔcotE spores had a fragmented and detached exosporium when formed at 37°C. However, when produced at 20°C, ΔcotE spores showed defects in both coat and exosporium attachment and were susceptible to lysozyme and mutanolysin. Thus, CotE has a role in the assembly of both the coat and exosporium, which is more important during sporulation at 20°C. CotE was more represented in extracts from spores formed at 20°C than at 37°C, suggesting that increased synthesis of the protein is required to maintain proper assembly of spore surface layers at the former temperature. ΔcotE spores formed at either sporulation temperature were impaired in inosine-triggered germination and resistance to UV-C and H2O2 and were less hydrophobic than wild-type (WT) spores but had a higher resistance to wet heat. While underscoring the role of CotE in the assembly of B. cereus spore surface layers, our study also suggests a contribution of the protein to functional properties of additional spore structures. Moreover, it also suggests a complex relationship between the function of a spore morphogenetic protein and environmental factors such as the temperature during spore formation., (Copyright © 2015, American Society for Microbiology. All Rights Reserved.)

Spores of the psychrotrophic Bacillus cereus KBAB4 strain were produced at 10 °C and 30 °C in fermentors. Spores produced at 30 °C were more resistant to wet heat at 85 °C, 1% glutaraldehyde, 5% hydrogen peroxide, 1M NaOH and pulsed light at fluences between 0.5 and 1.75 Jcm(-2) and to a lesser extent to monochromatic UV-C at 254 nm. No difference in resistance to 0.25 mM formaldehyde, 1M nitrous acid and 0.025 gl(-1) calcium hypochlorite was observed. Spores produced at 10 °C germinated more efficiently with 10 mM and 100 mM l-alanine than spores produced at 30 °C, while no difference in germination was observed with inosine. Dipicolinic acid (DPA) content in the spore was significantly higher for spores prepared at 30 °C. Composition of certain fatty acids varied significantly between spores produced at 10 °C and 30 °C., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

The effect of sporulation temperature on Bacillus cereus spore germination triggered by the nutrient germinants inosine and l-alanine was investigated. The germination (expressed as % A(600nm) fall) of heat-activated spores of B. cereus strain ATCC14579 produced at 20 and 37 degrees C, and of psychrotrophic strains LM9 and D15 produced at 15 and 37 degrees C was followed in a germination buffer containing inosine at concentrations between 0.01 and 10mmoll(-1), or l-alanine between 1 and 100mmoll(-1). Spores wet-heat resistance at 90 degrees C was also determined. Spores of the three strains produced at the lowest temperatures generally showed a higher germination capacity in response to both inosine and in l-alanine than those produced at 37 degrees C, and were also more susceptible to heat. Low sporulation temperature is confirmed as a detrimental factor to B. cereus spore wet-heat resistance, and conversely gave spores with a sensitivity to the nutrient germinants inosine and l-alanine higher than that of spores formed close to the maximal sporulation temperature.

Clostridium botulinum dormant spores germinate in presence of l-alanine via a specific receptor composed of GerAA, GerAB and GerAC proteins. In Bacillus subtilis spores, GerAA and GerAC proteins were located in the inner membrane of the spore. We studied the location of the GerAB protein in C. botulinum spore fractions by Western-blot analysis, using an antipeptidic antibody. The protein GerAB was in vitro translated and used to confirm the specificity of the antibodies. GerAB was not present in a coat and spore outer membrane fraction but was present in a fraction of decoated spores containing inner membrane. These results strongly suggest that the protein GerAB is located in the inner membrane of the spore.