Search

We present magnetic field sensitivity measurements of microwave SQUID multiplexers designed for bolometric applications. These devices are often used in environments with changing external magnetic fields, due to either motion through Earth's field or radiation from other pieces of instrumentation. To minimize the pickup of magnetic fields, these multiplexers utilize gradiometric SQUIDs, but residual pickup remains and must be characterized in order to design adequate magnetic shielding for a given application. To study the perpendicular field response, we utilize a single-axis cryogenic Helmholtz coil mounted to the mixing chamber of a dilution refrigerator, calibrated with a cryogenic fluxgate magnetometer. Measurements were made on multiplexer devices across varying microwave readout frequencies for AC magnetic fields from 0.01 to 100 Hz. We measure the magnetic field sensitivity of the multiplexer devices to be 0.1–0.3 ϕ 0 /Gauss, equivalent to an effective area of gradiometric failure of 2–6 μm 2 .Please check if the corresponding author affiliation is correctly identified.This looks correct to me. [ABSTRACT FROM AUTHOR]

The microwave SQUID multiplexer (μmux) has enabled higher bandwidth or higher channel counts across a wide range of experiments in particle physics, astronomy, and spectroscopy. The large multiplexing factor coupled with recent commercial availability of microwave components and warm electronics readout systems make it an attractive candidate for systems requiring large cryogenic detector counts. Since the multiplexer is considered for both bolometric and calorimetric applications across several orders of magnitude of signal frequencies, understanding the bandwidth of the device and its interaction with readout electronics is key to appropriately designing and engineering systems. Here, we discuss several important factors contributing to the bandwidth properties of μ mux systems, including the intrinsic device bandwidth, interactions with warm electronics readout systems, and aliasing. We present simulations and measurements of μ mux devices coupled with SLAC Microresonator RF (SMuRF) tone-tracking electronics and discuss several implications for future experimental design. [ABSTRACT FROM AUTHOR]

A microwave superconducting quantum interference device multiplexer has been optimized for reading out large arrays of superconducting transition-edge sensor (TES) bolometers. We present the scalable cryogenic multiplexer chip design that may be used to construct an 1820-channel multiplexer for the 4–8 GHz rf band. The key metrics of yield, sensitivity, and crosstalk are determined through measurements of 455 readout channels, which span 4–5 GHz. The median white-noise level is 45 pA/ Hz , evaluated at 2 Hz, with a 1/f knee ≤ 20 mHz after common-mode subtraction. The white-noise level decreases the sensitivity of a TES bolometer optimized for detection of the cosmic microwave background at 150 GHz by only 3%. The measured crosstalk between any channel pair is ≤ 0.3%. [ABSTRACT FROM AUTHOR]