Search

The main obstacles to promoting the commercialization of perovskite solar cells (PSCs) include their record power conversion efficiency (PCE), which still remains below the Shockley–Queisser limit, and poor long‐term stability, attributable to crystallographic defects in perovskite films and open‐circuit voltage (Voc) loss in devices. In this study, potassium (4‐tert‐butoxycarbonylpiperazin‐1‐yl) methyl trifluoroborate (PTFBK) was employed as a multifunctional additive to target and modulate bulk perovskite defects and carrier dynamics of PSCs. Apart from simultaneously passivating anionic and cationic defects, PTFBK could also optimize the energy‐level alignment of devices and weaken the interaction between carriers and longitudinal optical phonons, resulting in a carrier lifetime of greater than 3 μs. Furthermore, it inhibited non‐radiative recombination and improved the crystallization capacity in the target perovskite film. Hence, the target rigid and flexible p‐i‐n PSCs yielded champion PCEs of 24.99 % and 23.48 %, respectively. More importantly, due to hydrogen bonding between formamidinium and fluorine, the target devices exhibited remarkable thermal, humidity, and operational tracking at maximum power point stabilities. The reduced Young's modulus and residual stress in the perovskite layer also provided excellent bending stability for flexible target devices. [ABSTRACT FROM AUTHOR]

The wearable application of flexible organic solar cells (f‐OSCs) necessitates high power conversion efficiency (PCE) and mechanical robustness. However, photoactive films based on efficient non‐fullerene small molecule acceptors (NF‐SMAs) are typically brittle, leading to poor mechanical stability in devices. In this study, we achieved a remarkable PCE of 18.06 % in f‐OSCs while maintaining ultrahigh mechanical robustness (with a crack‐onset strain (COS) of higher than 11 %) by incorporating a linker dimerized acceptor (DOY‐TVT). Compared to binary blends, ternary systems exhibit reduced non‐radiative recombination, suppressed crystallization and diffusion of NF‐SMAs, and improved load distribution across the chain networks, enabling the dissipation of the load energy. Thus, the ternary f‐OSCs developed in this study achieved, high PCE and stability, surpassing binary OSCs. Moreover, the developed f‐OSCs retained 97 % of the initial PCE even after 3000 bending cycles, indicating excellent mechanical stability (9.1 % higher than binary systems). Furthermore, the rigid device with inverted structure based on the optimal active layer exhibited a substantial increase in efficiency retention, with 89.6 % after 865 h at 85 °C and 93 % after more than 1300 h of shelf storage at 25 °C. These findings highlight the potential of the linker oligomer acceptor for realizing high‐performing f‐OSCs with ultrahigh mechanical robustness. [ABSTRACT FROM AUTHOR]

Comprehensive Summary Inverted (p‐i‐n) perovskite solar cells (PSCs) are favored by researchers owing to their superior compatibility with flexible substrates and tandem device fabrication. Additionally, the hole transport layer (HTL) serves as a template for perovskite growth, which is critical for enhancing the device performance. However, the current research on how the HTL promotes perovskite crystallization is insufficient. Here, 4PADCB, a self‐assembled monolayer (SAM) hole transport material, was optimized as a superior template for perovskite growth through comparative analysis; accordingly, compact perovskite film with vertical growth was prepared. The better matched energy level alignment between 4PADCB and perovskite suppressed nonradiative recombination at the interface and enabled rapid hole extraction. Moreover, high‐quality perovskite film growth on 4PADCB exhibited lower Young's modulus and less residual stress. By integrating 4PADCB into p‐i‐n PSCs, the optimal device achieved a power conversion efficiency of 24.80%, with an open‐circuit voltage of 1.156 V, thus achieving the best rank among devices without perovskite post‐treatment, additives, dopants, or intermediate layers. Furthermore, the unencapsulated device demonstrated exceptional thermostability and photostability under maximum power point tracking. Thus, this work provides a new understanding for the development of novel SAMs and perovskite growth, and it is expected to further improve device performance. [ABSTRACT FROM AUTHOR]