Search

Thanks to the absence of rotor windings and permanent magnets, switched reluctance motors have a small weight construction. The integration of a modular power converter in a switched reluctance motor leads to a highly compact and fault-tolerant motor drive with small weight and high power density. In this article, a polygon-retrofitted integration topology is proposed for switched reluctance motors. Both the switched reluctance motor and the power converter are cooled with one shared cooling circuit. The power converter is designed and implemented using silicon carbide technology for its low losses and small thermal resistance. The proposed integration topology is extensively studied using multiphysics modeling and experimental measurements on a fully integrated rotating setup. A highly compact and power dense drive of 3.1 kW/L is obtained. [ABSTRACT FROM AUTHOR]

The electric drive power density and fault tolerance capability are of fundamental importance in many applications such as aerospace and traction applications. The modularization and the physical integration of the electric motor and the power converter components can lead to a high power density and a high fault tolerance drive system. The power density of a highly modular and integrated drive based on an axial flux permanent magnet synchronous machine and GaN converter is investigated in this paper. Several power density boosting techniques are provided and investigated using CFD simulations. These techniques incorporate optimization of the converter topology, the geometry of the shared cooling structure of the electric machine and the power converter and optimal selection of the materials in the path of heat transfer from the machine and the power converter to the cooling ambient. The power density of the reference integrated design is increased from 1.12 kW/ $l$ to 2.14 kW/ $l$. The CFD computations are validated by extensive measurements on a modular integrated setup. [ABSTRACT FROM AUTHOR]

In this article, a circulating-current-excited switched reluctance generator system using a standard diode rectifier is proposed and examined. It features a dc power source connected in series with the ring-connected windings, which provides the dc-bias current as the excitation current in the windings. Using a series-connected dc power source, a dc-bias current is easily realized in the ac winding. Compared with the existing machine having dc-bias in the ac winding, the proposed generator can provide dc power with a standard diode rectifier. Less active legs and no rotor position sensor are needed for the control of the circulating current of the proposed generator, which increases the reliability of the generation system. The system configuration and the operation principle are introduced in detail. Then, the electromagnetic performance of the proposed generation system is analyzed at both open-circuit and load conditions. The asymmetric current distributions are deduced and verified by the simulations. At last, the prototype is tested under varied operation conditions and the experiments agree well with the analysis. [ABSTRACT FROM AUTHOR]

Multiphase machines with a prime number of phases (five and seven) have shown better torque density than machines with other phase numbers. Unfortunately, these machines require a special stator design. Hence, this article proposes general rewinding techniques to obtain a five-phase winding from the existing standard three-phase stator frames. The proposed rewinding techniques are applied to construct a five-phase star-connected synchronous reluctance machine (SynRM 1) and a novel combined star-pentagon winding (SynRM 2). Simple mathematical formulations are introduced to compute the equivalent winding factor. The performance of five-phase SynRMs is analyzed using two-dimensional Ansys Maxwell transient simulations under the same copper volume for both healthy and faulty cases. SynRM 1 and 2 provide 6.56% and 13.35% higher torque compared to the three-phase SynRM at rated current and at optimal current angle. The torque ripple is decreased by 17% and 30%, respectively. Moreover, SynRM 1 and 2 offer a better performance at the faulty case; e.g., at one phase opened, the average torque of SynRM 1 and 2 is 82% and 108% higher compared to the three-phase SynRM. In addition, the torque ripple is reduced by about 63% and 81%. Finally, experimental results are done to validate the proposed winding techniques. [ABSTRACT FROM AUTHOR]

In this paper, a circulating-current-excited switched reluctance generator system with the diode rectifier is comparatively studied with a field-current-separated switched reluctance generator. By using a DC power source connected in series with the winding to provide the circulating current, a controllable excitation field is established in the proposed generator. To highlight the influence of this DC voltage source, the injected field current of the field-current-separated generator is kept the same as the circulating current of the circulating-current-excited generator. Then, both advantages and disadvantages of the generators are summarized. The circulating-current-excited switched reluctance generator system inherits both the advantages of good reliability of the separated-winding generator by using the diode rectifier and low copper loss of the integrated-winding machine by combining the AC and DC current in one set of windings. Furthermore, two more practically conventional field-current-separated generators are also compared with the proposed generator in terms of the external characteristics. These two conventional generators have different winding configurations. At last, the analysis is verified by experiments. [ABSTRACT FROM AUTHOR]

In this article, a dc-link structure feasible for integration with the circumscribing polygon modular integrated drives is proposed. The proposed dc-link structure combines both the dc-link capacitors and the bus-bar together and integrates them with the machine and the converter modules without increasing the outer diameter of the integrated machine/converter structure. A generic design methodology for the proposed dc-link structure is provided and applied on a reconfigurable 15 stator coils concentrated winding axial flux machine for all its possible phase configurations. The design methodology presented in this article involves the determination of the required dc-link capacitance and the multiphysics design of the bus-bar. The parasitics of the bus-bar part of the proposed dc-link structure are evaluated using electromagnetic finite element method (FEM) models and their influence on the dc-link waveforms is evaluated. Due to the expected high ambient temperature inside an integrated drive, electromagnetic and computational fluid dynamics (CFD) models are developed for the proposed dc-link structure to evaluate the loss density and the temperature distribution of the bus-bar to ensure reliable operation. An experimental setup is built to validate the design methodology. [ABSTRACT FROM AUTHOR]

This article compares the performance of an existing three-phase synchronous reluctance machine (SynRM) with an identical machine that is upgraded to a five-phase machine. Two different methods are possible to convert the existing three-phase machine to a five-phase one with minimum cost. In the first method, a five-phase SynRM (SynRM 1) is obtained by replacing the existing stator by another one that has an integer number of slots per pole, i.e., a multiple of five. In the second method, a five-phase SynRM (SynRM 2) is obtained by rewinding the existing stator with a special type of winding. This is because the slot number of the existing stators is not a multiple of five. The novelty of the article is that two five-phase SynRMs are compared with the original three phase reference machine in terms of torque and torque ripple, in healthy and fault conditions. At rated condition and optimal current angle, SynRM 1 performs better than SynRM 2 in terms of rated torque: SynRM 1 and 2 have 11.8% and 6.6% higher torque than the three-phase machine. But, SynRM 1 has 25% more torque ripple than the three-phase reference machine, while SynRM 2 has 17% lower torque ripple. At faulty case, SynRM 1 and 2 work at 74% and 79% of the healthy rated torque of the three-phase SynRM, while the three-phase SynRM works at only 43% with a very huge torque ripple. Finally, experimental measurements are obtained to validate the theoretical work. [ABSTRACT FROM AUTHOR]

In this article, a circumscribing polygon integrated modular motor drive topology with shared cooling for the power converter and the electrical machine is proposed and benchmarked with the nonintegrated version. The proposed topology is applied on an axial flux permanent magnet synchronous machine. The topology is capable of mechanically mounting the power converter, sufficiently cooling both the power converter and the electrical machine, and combining both of them into the same housing. The mechanical and the thermal design are done to ensure thermal decoupling between the power converter and the motor winding, and to provide a low thermal resistance from the power converter and the electrical machine to the ambient. Due to the limited space available for the power converter module, wide bandgap semiconductor technology is chosen for the implementation of the converter module, thanks to their small package size and low power losses. A highly modular, integrated, and compact drive is achieved compared to the nonintegrated one. A computational fluid dynamics (CFD) model is developed for one module of the proposed integrated drive to evaluate the maximum current that can be injected by one converter module without exceeding the junction temperature limit of the switches and the maximum winding temperature. An experimental setup is built to validate the results of the introduced multiphysics models. [ABSTRACT FROM AUTHOR]

To meet the demand for increasingly high power density in electric drives, the concept of a so-called integrated modular motor drive has emerged. The machine is composed of multiple identical modules, which receive individual control signals for multiphase control, to reduce unwanted stator current harmonics. Each module is equipped with its own power electronic converter, which is integrated in the machine housing. This integration imposes strict constraints on the dc-link capacitor design. To reduce the dc-link current ripple, and hence relax the design constraints on the dc-link capacitor, without compromising the possibility to eliminate unwanted stator current harmonics by means of multiphase control, a new interleaving strategy is proposed in this article. The n modules of the machine are split into p subgroups of m modules for interleaving, while the n-phase control is preserved. An analytical model, simulations and experimental results are provided for a 4 kW test setup, confirming that multiphase control can be combined with interleaving. As a result, both the stator current harmonic distortion and the dc-link current ripple can be reduced simultaneously. [ABSTRACT FROM AUTHOR]

Concentrated windings are favourable in electric motors with a high torque density because of the achievable high winding filling factor and their short end-windings. Nevertheless, the performance of the cooling system has the biggest impact on the reachable torque density limits. This article introduces a thermally conductive insert piece that encloses the stator end-windings with extensions in the stator slots. This results in an extended contact surface between the stator windings and the machine housing, which is advantageous for the conductive heat transfer. The introduced indirect cooling concept is compatible with traditional cooling techniques such as forced air and water jacket cooling. The concept is illustrated with 3D thermal finite element simulations, including the anisotropic thermal material properties, as well as ad hoc measurements on a stator pole unit mock-up of a 6-4 switched reluctance machine. Where the stator with reference cooling system was only able to handle a continuous current density of 19.0 A/mm $^2$ , 26.5 A/mm $^2$ could be obtained in the winding of the stator with the extended end-winding cooling inserts. [ABSTRACT FROM AUTHOR]

This paper proposes a method to design an electrical variable transmission (EVT) of which the stator and inner rotor contain a distributed three-phase winding, and the outer rotor is equipped with permanent magnets and a dc-field winding. The main problem with the design of EVTs is that the modeling relies on time-consuming finite-element (FE) calculations. Studying the effect of design changes is, therefore, a cumbersome task. To minimize the need for FE calculations, scaling laws are applied, which reduce the computational effort to a matter of milliseconds per design. Therefore, the losses of multiple scaled designs can be analyzed for a given load cycle while taking constraints into account such as maximum torque. By presenting this data in a performance map, the optimal design regarding the losses is easily deduced. To validate the presented methodology, FE calculations, measurements, and available literature are used. [ABSTRACT FROM AUTHOR]

A continuous demand for more efficient and more compact drives is pushing the popularity of high-speed permanent magnet synchronous machines (PMSMs). However, high rotational speeds and extreme power densities imply that an appropriate cooling of the rotor may be difficult. This is all the more important because of the risk of demagnetization when permanent magnets are operated at high temperatures. Therefore, it is paramount to reduce the losses in the rotor of high-speed machines as much as possible. One technique to reduce the eddy-current losses is introducing a shielding cylinder, i.e., a conductive sleeve that is wrapped around the magnets. However, when badly designed, such a shielding cylinder may increase, rather than decrease, the losses. Therefore, an in-depth study of the effect of the shielding cylinder on the eddy-current losses in high-speed PMSMs is required. By studying how the eddy-current losses are affected by the shielding cylinder’s thickness and its conductivity, this paper aims at providing more insight in how the eddy-current losses can be reduced. Moreover, the study of the eddy-current losses is repeated for different stator sources to evaluate the importance of accounting for the actual control strategy during the machine’s design. [ABSTRACT FROM AUTHOR]

Increasing performance requirements for electrical machines such as energy efficiency and torque density require a multiphysics design approach. In these designs, many machine parts very often combine multiple functions, such as electromagnetic, thermal, and mechanical, to keep the design compact and reduce the overall weight, or introduce nonconventional materials in electrical machines. In this paper, epoxy potting techniques are used to keep the different stator parts of a yokeless and segmented armature axial flux PM machine together, and it focuses mainly on the multiphysics aspects of the epoxy resins as well as on their implications on the overall stator design. In this multiphysics design approach, the effect of specific epoxy resin parameters such as maximum service temperature, thermal conductivity, Brookfield viscosity, tensile strength, and coefficient of thermal expansion, on the electromagnetic, thermal and mechanical behavior of the stator are examined. Epoxy resin parameters are evaluated in detailed experiments on small test samples, and finally, measurements on a full prototype 4 kW, 2500 rpm stator are performed. [ABSTRACT FROM AUTHOR]

Despite the use of state-of-the-art thermal modeling tools in the design stage, the measured thermal behavior of prototype electrical machines can differ significantly from the modeled ones. This paper shows how a thermal model, based on the finite-element method, of an electric machine can be improved using inverse modeling techniques. In a thorough study, a forward high fidelity finite-element thermal model of a 4-kW axial flux permanent magnet (PM) machine is introduced and improved using inverse modeling techniques via noncollocated thermal sensors. Parametric model order reduction of the high fidelity finite-element thermal model based on the moment matching method is performed to make the recovery of the actual thermal parameters characterizing the thermal behavior of the axial flux PM machine tractable. Furthermore, the same reduced order model is used to identify the different power loss components in the machine. Experimental results confirm that the presented two-stage approach is capable of identifying the thermal parameters and losses with high accuracy. [ABSTRACT FROM AUTHOR]

This paper investigates the performance of synchronous reluctance motors when the stator is equipped with a combined star–delta winding layout. The conventional star winding is used as a benchmark in this study to compare different possible single-layer winding layouts. Among these different winding layouts, those which maximize the fundamental magneto-motive force component are selected. A simple mathematical formula is then derived to calculate the equivalent winding factor for different shares between star and delta subwindings. It has been proved that for the same copper volume and line current magnitude, the star–delta connection can offer an enhancement in the torque density of approximately 5.2% over the conventional star case under rated conditions. However, this gain is affected by the employed number of poles and stator slots. On the other hand, the effect of the winding layout on either power factor or core loss can be merely neglected over a wide range of speeds and currents. Nevertheless, the machine efficiency under a combined star–delta connection is relatively improved under light loading as a result to the machine torque/current ratio enhancement. The theoretical findings are experimentally validated using two identical 5.5 kW prototype machines, having star and combined star–delta winding connections. [ABSTRACT FROM AUTHOR]

This paper describes how an electrical variable transmission (EVT) can be used as an alternative for mechanical continuously variable transmission (CVT) systems. An EVT is an electromagnetic power split device having two mechanical and two electrical ports. The speed ratio between both mechanical ports (rotors) can be varied in a continuously variable way, so that this machine can be used as an electromagnetic alternative for the mechanical push-belt and half-toroidal CVT. Its operating principle is based on splitting the power into an electromagnetic direct path and an electrical path involving two inverters connected back to back. Its potential use as a CVT is investigated by comparing experimental data against toroidal and belt CVT data from literature having comparable power ratings. To this end, measurements are performed on a prototype \text120-kW permanent magnet EVT. [ABSTRACT FROM AUTHOR]

An electrical variable transmission (EVT) is an electromagnetic power-split device with two mechanical and two electrical ports. It can be used in hybrid electric vehicles to split the power to the wheels in a part coming from the combustion engine and a part exchanged with the battery. Although crucial for the EVT design and evaluation, no papers are found to give a detailed overview of the different loss components in such a machine and how they can be calculated and measured. In contrast to conventional electrical machines, this machine has more degrees of freedom, which can be exploited to measure the different loss contributions separately. This paper proposes a methodology to identify and measure the different loss components in this kind of machines. The proposed method is able to identify the iron losses in stator and inner rotor, the copper losses, bearing losses, and slip ring friction losses separately. To this end, measurements of both torque and speed sensors in different operating points are combined. The methods are applied to identify the different loss contributions in a prototype permanent magnet assisted EVT, both in no-load operation as under load where its functionality as power-split device is evaluated. [ABSTRACT FROM PUBLISHER]

An electrical variable transmission (EVT) is an electrical machine consisting of a stator and two concentric rotors. It is a competitive alternative for power split devices used in current series–parallel hybrid electric vehicles (HEVs). Although tending to have high power densities, permanent magnet (PM) machines suffer from no-load iron losses. Since the torque interaction between stator and outer rotor is low during large time intervals, the EVT in this paper possesses a flux bridge with dc-field winding to modulate the stator field, while maintaining the inner rotor flux linkage. In this paper, a torque controller is proposed that optimally combines the stator, dc-field, and inner rotor currents in order to minimize the copper and iron losses in every operating point of torque and speed on both rotors. Also the electromagnetic coupling between both rotors is considered. It turns out that there are two optimal load angles for the stator currents, of which one of the two is dominant depending on speed and torque. The control is tested on a 120 kW prototype EVT, and measurement results are given to illustrate the optimal performance obtained with the proposed torque control. In addition, efficiencies are measured in order to support the statements made concerning the proposed method. [ABSTRACT FROM PUBLISHER]

An electrical variable transmission (EVT) can be used as a power splitting device in hybrid electrical vehicles. The EVT analyzed in this paper is a rotating field electrical machine having two concentric rotors. On the outer rotor, permanent magnets (PMs) are combined with a dc-field winding, being the first implementation of its kind. The magnetic field in the machine as well as the electromagnetic torque on both rotors are a function of the q- and d-axis currents of the stator and inner rotor, as well as the dc-field current. To describe and fully understand this multiple-input multiple-output machine, this paper gives an overview of the influence of the different current inputs on the flux linkage and torque on both rotors. Focus is given to the hybrid excitation in the d-axis by combining the dc-field current and the alternating currents. This has the advantage compared to other EVT topologies that unwanted stator torque can be avoided without stator d-axis current flux weakening. Results of the analysis are presented by means of the torque to current characteristics of a double rotor PM-assisted EVT, as well as the torque to current ratios. The machine characteristics are finally experimentally verified on a prototype machine. [ABSTRACT FROM PUBLISHER]

The rotor discs in axial flux permanent magnet (PM) machines have similar properties as a radial fan, and therefore, the convective cooling may have a significant influence on the thermal design of these machines. To research the impact of convective cooling on the thermal properties of axial flux PM machines, a coupled electromagnetic and thermal model is introduced in this paper. This technique models a segment of the stator and the rotor only and links them together by analytical equations of the convective heat transfer at different boundaries of the machine model. This results in an accurate and time efficient multiphysics model. The coupled electromagnetic and thermal modeling technique is validated with measurements on a 4 kW axial flux PM machine having the yokeless and segmented armature topology. [ABSTRACT FROM AUTHOR]

Similar to standard three phase direct on line induction motors are three phase line-start permanent-magnet machines (LSPMMs) susceptible to grid voltage distortion. Although straight forward adaptation of harmonic loss mechanisms for standard squirrel-cage induction motors to LSPMMs seems appropriate, this study will indicate that harmonic loss calculations of induction machines are unsuitable to give accurate or even reasonable estimations of the influence of supply voltage distortion on the energy efficiency of LSPMMs. This research will specifically address the interaction of rotor-induced harmonic currents. Finite-element modeling is used in order to address the effect of supply voltage distortion on the segregated losses of an LSPMM. Finite-element modeling (FEM) allocates the majority of the harmonic loss to the rotor and shows shifting the relative phase angle between identical magnitudes of superimposed supply distortion of fifth and seventh order can result in a 30% reduction of rotor loss and 0.5 percentage points in overall energy efficiency. The results obtained by FEM are validated by practical measurements. [ABSTRACT FROM PUBLISHER]

In this paper, a combined wye-delta connection is introduced and compared with a conventional wye-connection of a concentrated winding. Because the combined wye-delta connection has a higher fundamental winding factor, the output torque is higher for the same current density when a sinusoidal current is imposed. As the combined wye-delta connection has only a minor influence on the losses in the machine, the efficiency of the machine is also increased. The combined wye-delta connection is illustrated in detail for an axial-flux permanent-magnet synchronous machine with a rated power of 4 kW at a fixed speed of 2500 r/min, using finite element computation and measurements on a prototype machine. [ABSTRACT FROM PUBLISHER]

The performance of a variable speed wind turbine using a direct-drive permanent-magnet synchronous generator (PMSG) as well as a PMSG with single stage planetary gearbox is compared for two grades of electric steel applied for the generator stator core lamination. A ring type, radial flux PMSG is modeled. For a fixed mechanical power input, the geometry of the generator is optimized for each turbine systems and two materials to maximize the annual efficiency of the generator. The annual efficiency is calculated based on the power curve of the generator and the probability density function of the wind speed. This function is approximated by the Weibull distribution function for a site with average wind speed of 7 m/s. For both generator systems, the annual efficiency of two optimized generators using different steel grades differs around 1%. The difference depends on a mass of active material of the generator. [ABSTRACT FROM AUTHOR]