Search

This article proposes a simple method to calculate a current vector trajectory for the enhanced operation of the electric power generation system based on a synchronous reluctance machine (SynRM). Owing to magnetic saturation and cross magnetization, the performance and the torque capability of a SynRM vary according to the position and the value of the stator current. State-of-the-art control methods usually assume parameters with constant values, especially the inductance, neglecting saturation, leading to possible uncertainty in the machine operation. Therefore, a current vector trajectory to operate this type of machine, as a generator, in an extended speed range, with enhanced performance and considering magnetic saturation is proposed. A straightforward algorithm based on the inductance characteristic of the machine is used to calculate the trajectory of the stator current vector. This trajectory is evaluated via the numerical simulation of an experimentally validated finite-element model of a SynRM. The results show that the proposed current vector trajectory can improve the torque capability to 5% concerning the estimated trajectory without considering saturation. Experimental results are also provided to demonstrate the enhanced operation of the generator. [ABSTRACT FROM AUTHOR]

This article presents an accurate analytical model (AM) for synchronous reluctance machine (SynRM) that incorporates the effect of stator slots on the air gap flux density and torque waveforms. From the formulation of magnetic potential in the air gap for both the stator and rotor, the flux density is obtained, considering the first harmonic of the flux density and the electric loading, the average torque is calculated using the Lorentz’s force. The ripple torque is obtained from the energy stored in magnetic circuit. The method is developed for a rotor with one flux barrier per pole and then extended to a larger number of barriers. To validate the results obtained by the AM proposed finite element analysis have been carried out. Several comparisons have been derived considering different rotor positions as well as different harmonic orders, and the pros and cons of the method are highlighted. The model performs fast and can predict results with high accuracy, and can be adopted to speed up the preliminary design and optimizations of this type of motors, with respect to finite element. In addition, from the analytical expressions it is possible to obtain all the correlations between electrical, magnetic, and geometrical characteristics of the machine, with the advantage of enabling a faster machine design. [ABSTRACT FROM AUTHOR]

Armature-reaction-compensated permanent-magnet synchronous generators are a particular type of hybrid excitation synchronous generators, where the main flux is created by the permanent magnets and the field winding is needed only to compensate the armature reaction. This paper studies the feasibility of an armature-reaction-compensated permanent magnet synchronous generator in island operation by comparison with a conventional electrically excited synchronous generator and permanent magnet synchronous generator. The aim of this paper is to demonstrate the performance of an armature-reaction-compensated permanent magnet synchronous generator and its operation principle in island operation. As part of the study, a 55 kW prototype was built and tested. The experimental results of the prototype are presented. [ABSTRACT FROM PUBLISHER]

Hybrid excitation synchronous generators are a special class of electrical machines in which the total rotor current linkage is produced by the simultaneous action of two different excitation sources: permanent-magnet (PM) excitation and field winding excitation. In the island operation, there is a need to compensate the armature reaction to keep the generator terminal voltage constant. The permanent magnet excitation is used to create the no-load excitation to the generator and the rotor winding is used as an armature reaction compensating winding. This paper studies the applicability of an armature-reaction-compensated PM synchronous generator to a marine diesel genset. This paper presents an analytical approach for the electromagnetic design of the proposed topology. Finite-element analysis and experimental measurements are performed to verify the results of the analytical approach. [ABSTRACT FROM PUBLISHER]

Hybrid and full electric technologies are fast emerging in vehicles and mobile working machines, where electric machines and internal combustion engines are used together to power the systems. Permanent magnet (PM) technology plays an important role here despite the high magnet prices. This paper theoretically and empirically studies the design principles of PM synchronous machines (PMSMs) for hybrid applications, where a high starting torque and a wide field weakening range are needed. Several embedded-magnet PMSM magnetic circuit topologies are considered as possible candidates. A 10-kW PMSM prototype was built and tested. Experimental results verify the theoretical considerations well. [ABSTRACT FROM PUBLISHER]

High power machine has become a large market for wind power and ship propulsion electric, among other applications. Since the size of these machines is much larger than conventional industrial ones, optimum design must be considered in order to reduce the material cost and increase profitability. In this paper, a simple analytic optimization algorithm is used to maximize the apparent airgap power transferred under tangential stress constraint. In this approach, close related expressions between the main design variables, operational restrictions, and external dimensions are derived to build the mathematical structure of the optimization process. To improve the torque capacity estimation of the designed machine, a correction procedure, based on the previous result, is used to remove the idealizations considered for the initial design. Close agreement with the finite element analysis results are found with this approach, which is based on analytical method. [ABSTRACT FROM AUTHOR]