Search

This article investigates the design methods and performance optimization of segmented-double-stator switched reluctance machine (SDS-SRM). First, two segmented U-shaped single-stator SRMs are introduced, including inner-rotor and outer-rotor constructions. In order to enhance the torque and power density, these two kinds of single-stator SRMs are combined together to constitute an SDS-SRM. Then, the relationships of torque ripple coefficient with the mechanical offset angles of the inner and outer rotor teeth are investigated to obtain the optimal rotor structure, and the corresponding conduction phase sequences for double-stator excitation mode are also analyzed. Furthermore, the flux distributions of the inner and outer stators with different coil magnetic polarities configurations are researched, and it reveals that the phase windings both on inner and outer stators with NSSNNSSN polarities have better magnetic field decoupling characteristics. To evaluate the final topology of the proposed SDS-SRM, the static magnetic characteristics and dynamic performances are presented. Finally, the SDS-SRM prototype is manufactured and tested to validate the theory and simulation analyses. [ABSTRACT FROM AUTHOR]

This paper mainly takes a 6/4 switched reluctance motor (SRM) as an example to analyze the temperature of the motor. In order to establish the equivalent thermal circuit model (ETCM) conveniently, the mechanical structure of the motor is simplified to a certain extent, and the characteristic nodes are divided. Then the heat transfer process in the rotor region, the stator region and the whole motor during the operation of the motor is analyzed, and the ETCM of those regions are established respectively. This method of establishing ETCM is also applicable to superconducting motors. Based on the basic principles of heat transfer, the calculation method of thermal resistance in each ETCM is given in this paper. Then, the three-dimensional (3-D) finite element (FE) temperature field model of the motor is built and compared with the ETCM. Finally, the accuracy of the ETCM is verified by experiments. [ABSTRACT FROM AUTHOR]

This paper analyzed the flux characteristics of a single-phase tubular switched reluctance linear motor (TSRLM) based on magnetic equivalent circuit (MEC) method. The single-phase TSRLM is divided into five different parts, which are the teeth of the stator, the yoke of the stator, air gap, the teeth of the mover, and the yoke of the mover. The reluctance of every part is expressed in analytical formulas at five special mover positions. The flux linkages at five special mover positions are calculated by magnet tube method and Gauss–Seidel iteration method which takes the saturation into consideration. A high-order Fourier series method is used to map the nonlinear relationship between flux linkage, current, and mover position with the flux linkage data calculated by the MEC method. The calculated flux linkage is consistent with 3-D finite-element method and experimental results. The dynamic and static performance of the simulation utilized with MEC method is consistent with those in experiments, which verifies the accuracy of the MEC method proposed in this paper. [ABSTRACT FROM AUTHOR]

This paper analyzes the flux characteristics and normal force of the double-sided switched reluctance linear machine (SRLM) under the asymmetric air gap. The magnetic equivalent circuit (MEC) of the machine and the details of the flux paths configuration at six distinct mover positions under the asymmetric air gap are included. Then, six special mover position magnetization curves are calculated by solving the MEC with the method of Gauss–Seidel. The magnetic flux-linkage model and thrust model based on six distinct mover positions are established by analytical polynomial. Three-dimensional (3-D) finite-element method (FEM) simulation and the experimental study with the prototype hardware are carried out to validate the accuracy of the MEC model calculated for the flux linkage and normal force. The six distinct mover positions flux linkage and normal force calculated by the MEC are consistent with the 3-D FEM calculated data and experimental data. It indicates that the proposed method to calculate the flux linkage and the normal force is feasible and effective. The dynamic analysis is also conducted. The simulated phase current waveforms are also consistent with the experimental results. It indicates that the presented method can be used to simulate the phase current under the asymmetry air gap effectively. The normal force under different asymmetry rates is analyzed, which provides the theoretical basis for reducing the unbalanced force of the double-sided SRLM. [ABSTRACT FROM AUTHOR]

Tubular switched reluctance linear motor (TSRLM) has lower loss and higher thrust density than flat-type switched reluctance linear motor. Two kinds of single-phase TSRLMs with different surrounding magnetic flux paths are introduced in this paper. The structure of transverse flux TSRLM (TF-TSRLM) is compared with the structure of the longitudinal flux TSRLM (LF-TSRLM). The structure selection of TF-TSRLM with two poles, four poles, six poles, and eight poles is made for enhancing average electromagnetic thrust. The comparisons between LF-TSRLM and TF-TSRLM are made in the same stator outer diameter, the same mover laminated thickness, and the same excited current on static electromagnetic thrust, magnetization curves, average thrust per unit volume, and average thrust per unit mass. They show that the TF-TSRLM with the six-pole structure is considered as a relatively more reasonable structure for enhancing the space effective utilization rate and increasing the electromagnetic thrust. [ABSTRACT FROM AUTHOR]