Search

This article investigates the design methods and performance optimization of segmented-double-stator switched reluctance machine (SDS-SRM). First, two segmented U-shaped single-stator SRMs are introduced, including inner-rotor and outer-rotor constructions. In order to enhance the torque and power density, these two kinds of single-stator SRMs are combined together to constitute an SDS-SRM. Then, the relationships of torque ripple coefficient with the mechanical offset angles of the inner and outer rotor teeth are investigated to obtain the optimal rotor structure, and the corresponding conduction phase sequences for double-stator excitation mode are also analyzed. Furthermore, the flux distributions of the inner and outer stators with different coil magnetic polarities configurations are researched, and it reveals that the phase windings both on inner and outer stators with NSSNNSSN polarities have better magnetic field decoupling characteristics. To evaluate the final topology of the proposed SDS-SRM, the static magnetic characteristics and dynamic performances are presented. Finally, the SDS-SRM prototype is manufactured and tested to validate the theory and simulation analyses. [ABSTRACT FROM AUTHOR]

This paper mainly takes a 6/4 switched reluctance motor (SRM) as an example to analyze the temperature of the motor. In order to establish the equivalent thermal circuit model (ETCM) conveniently, the mechanical structure of the motor is simplified to a certain extent, and the characteristic nodes are divided. Then the heat transfer process in the rotor region, the stator region and the whole motor during the operation of the motor is analyzed, and the ETCM of those regions are established respectively. This method of establishing ETCM is also applicable to superconducting motors. Based on the basic principles of heat transfer, the calculation method of thermal resistance in each ETCM is given in this paper. Then, the three-dimensional (3-D) finite element (FE) temperature field model of the motor is built and compared with the ETCM. Finally, the accuracy of the ETCM is verified by experiments. [ABSTRACT FROM AUTHOR]

The iron loss of doubled-sided linear switch reluctance motor (DLSRM) is analyzed and calculated in this paper. Because of the double salient structure of the switched reluctance motor and the nonlinearity of the magnetization curve of the ferromagnetic material, the flux density waveform is nonsinusoidal. So, it is difficult to calculate the iron loss of DLSRM. This paper mainly introduces the calculation method of dynamic magnetic density of the DLSRM, and basing on this, the simulation model of iron loss of DLSRM is built and compared the iron loss in different parts of the total as a percentage of the motor. Finally, an experimental platform based on DLSRM is built to measure the actual iron loss in the motor and verify the correctness of the calculation of iron loss. [ABSTRACT FROM AUTHOR]

This paper calculates the flux characteristic of a single-phase tubular switched reluctance linear launcher (TSRLL) with 3-D magnetic equivalent circuit (MEC) method. First, the 3-D finite element (FE) model of the single-phase TSRLL is established in FLUX, which is the foundation of the 3-D MEC model. The single-phase TSRLL is divided into different parts, including the teeth of the stator, the yoke of the stator, air gap, the teeth of the mover, and the yoke of the mover. The flux linkage at different mover positions and different currents is calculated with the proposed 3-D MEC model. Compared with the 3-D finite-element analysis (FEA) results, 3-D MEC model can obtain the flux characteristics of the single-phase TSRLL in a shorter time. The result of the 3-D MEC of the single-phase TSRLL is consistent with the 3-D FEM results and the experimental results, which validates the correctness of the proposed 3-D MEC model. [ABSTRACT FROM AUTHOR]

This paper gives a way to analyze the flux characteristic of a single-phase tubular permanent magnet linear motor (TPMLM) based on the 3-D magnetic equivalent circuit (MEC) method. By studying the flux tubes of this single-phase TPMLM with the finite-element analysis software—FLUX, a 3-D MEC model of this motor can be constructed, and the flux linkage of the single-phase TPMLM can also be calculated. The static and dynamic performances of the single-phase TPMLM calculated with the 3-D MEC model are compared with the 3-D finite-element model and experimental results, which verify the correctness of the proposed 3-D MEC model. [ABSTRACT FROM AUTHOR]