Search

[Display omitted] • Cable plastic, a mix of PE, XLPE and PVC, cannot be mechanically recycled. • Cable plastic steam cracking was evaluated as recycling option in an industrial scale. • Steam cracking of cable plastic shows the production of olefins and benzene. The use of plastic materials in a circular way requires a technology that can treat any plastic waste and produce the same quality of product as the original. Cable plastic residue from metal recycling of electric wires is composed of cross-linked polyethene (XLPE) and PVC, which is a mixture that cannot be mechanically recycled today. Through thermochemical processes, polymer chains are broken into syngas and monomers, which can be further used in the chemical industry. However, feedstock recycling of such a mixture (XLPE, PVC) has been scarcely studied on an industrial scale. Here, the steam cracking of cable plastic was studied in an industrial fluidised bed, aiming to convert cable plastics into valuable products. Two process temperatures were tested: 730 °C and 800 °C. The results show that the products consist of 27–31 wt% ethylene and propylene, 5–16% wt.% other linear hydrocarbons, and more than 10 wt% benzene. Therefore, 40%–60% of the products are high-value chemicals that could be recovered via steam cracking of cable plastic. [ABSTRACT FROM AUTHOR]

• The thermochemical recycling of tall oil pitch residue was assessed as an alternative treatment , currently it is used as fuel in the pulp industry. • TFluidized bed steam crackingat 775–825 °Cproduces valuable chemicals(ethylene, propylene and benzene) leading towards a circular economy. • Energy balances show that ttall oil pitch steam cracking can be self-sustained in a dual fluidized bed if the non-valuable products are combusted. Crude tall oil is a by-product obtained from the manufacture of chemical wood pulp. The residue obtained after the distillation of this product is known as tall oil pitch (TOP). This complex fraction is a highly viscous liquid that consists mainly of free fatty acids, fatty acids derivatives, rosin acids and additives. Given its complex composition, it is commonly used as fuel for heat production. In this work, steam cracking is proposed as an alternative treatment for this residue. Steam cracking can convert TOP into a valuable product gas that can be used in different applications including the production of green chemicals, moving towards a carbon circular economy. The experimental tests were performed in the Chalmers pilot scale Dual Fluidized Bed, consisting of a steam cracker and a combustor. For these experiments, the thermochemical decomposition of 150–175 kg/h TOP was performed at the steam cracker at two different temperatures (775 and 825 °C) to evaluate the influence of this parameter on the obtained products. Wood pellets were also tested as reference material for the highest temperature. The distribution of the obtained products was analysed. Results show that TOP can be regarded as a by-product instead of a residue and used as feedstock for the recovery of chemical building blocks and syngas via thermochemical recycling. Between 40 and 50 % of the carbon present in the fuel is kept in the permanent gases, while about 20 % is in aromatic hydrocarbons. Compared to biomass, the aromatics yield obtained for TOP is much higher (190 g/kg for TOP and 13 g/kg for biomass). Among the species found, benzene, toluene and xylene, represent between 62 and 72 % of the total measured aromatics. Regarding the gas fraction, the production of valuable light hydrocarbons (such as ethylene and propylene) is more pronounced in the TOP residue than in the biomass. In addition, an energy balance over the system was estimated and showed that TOP thermochemical recycling can be self-sustained in a Dual Fluidized Bed if the non-valuable products are combusted. The results obtained in this work indicate that this TOP could be an appealing option to consider as a source of biorefinery revenue leading to the circular use of waste. [ABSTRACT FROM AUTHOR]

Steam cracking in fluidized beds offers an alternative to conventional steam cracking for sustainable hydrocarbon production. This approach has gained interest, particularly in the context of recycling plastics to generate valuable hydrocarbons. Integrating this process into existing petrochemical clusters necessitates a thorough characterization of the products derived from this new feedstock. This work focuses on addressing the challenges associated with species quantification and characterization time for assessing the product mixture resulting from a steam cracking process. The experiments were conducted in a semi-industrial scale dual fluidized bed steam cracker, utilizing polyethylene as the feedstock. To sample species spanning from C1 to C18, cooling, scrubbing, and adsorption were introduced. These steps were integrated with GC-VUV (Gas Chromatography with Vacuum Ultraviolet Spectroscopy) and other widely recognized analytical methods to quantify the sampled species. The primary focus was on GC-VUV analysis as a suitable characterization method for identifying and quantifying C4 to C18 species, which can constitute up to 35% of the product mixture obtained from polyethylene steam cracking (750 °C to 850 °C). Quantifying C6 to C18 hydrocarbons becomes the time-critical step, with GC-VUV potentially achieving this in 1/6th of the analysis time and with relatively optimal quantification compared to the traditional characterization methods. • Steam cracking of polyethylene in semi-industrial scale fluidized bed steam cracker. • Characterization of the product gas mixture with GC-VUV. • GC-VUV excels in detecting and quantifying C4 to C18 hydrocarbon species. • Significantly reduced analysis time with GC-VUV. [ABSTRACT FROM AUTHOR]