Search

This study deals with two different aspects of the high-strength low-alloyed 1100 MC steel. The first is associated with the remarkable heterogeneity (linked with surface decarburization) in the surface state produced during sheet rolling with respect to the sheet width. The variable thickness surface layer exhibits a microstructure different from that of the deeper bulk. Variation in the thickness of the thermally softened near-surface region strongly affects Barkhausen noise as well. This technique can be considered a reliable tool for monitoring the aforementioned heterogeneity. It can also be reported that the opposite sides of the sheet are different with respect to the surface state, the heterogeneity distribution, and the corresponding Barkhausen noise. These aspects indicate different conditions during hot rolling followed by rapid quenching on the upper and lower rollers. Furthermore, it was found that the degree of decarburizing and the corresponding surface heterogeneity is also a function of C content, and steels with lower C content exhibit less pronounced surface heterogeneity. The second aspect is related to the remarkable asymmetry in Barkhausen noise emission with respect to two consecutive bursts. This asymmetry is due to the presence of remnant magnetization in the sheet produced during manufacturing. The remnant magnetization is coupled to the magnetic field produced by the excitation coil of the Barkhausen noise sensor and strongly contributes to the aforementioned asymmetry. The remnant magnetization attenuates the domain wall mobility, which results in weaker Barkhausen noise. Moreover, the Barkhausen noise envelopes and the extracted features such as the position of the envelope maximum and its width are strongly affected by the remnant magnetization. Insufficient demagnetization makes the body magnetically softer and makes a wider range of magnetic fields in which Barkhausen noise emission can be detected. As soon as sufficient removal of this remnant magnetization is carried out in the vanishing magnetic field (demagnetization), the aforementioned remarkable asymmetry is fully lost. [ABSTRACT FROM AUTHOR]

The usability of the magnetic Barkhausen noise (MBN) technique for monitoring the critical state of plastic straining in the case of interstitial free (IF) steel is demonstrated. IF steels are frequently employed in the automotive industry (e.g., automotive body parts—doors, trunks, wheel arches, etc.), and rupture of components made of these steels occurs during cold forming. Alteration of microstructure expressed in many terms and the corresponding MBN features after the variable degree of plastic strains developed by the uniaxial tensile loading are investigated. It is reported that the effective value of MBN, as well as the shift of MBN envelopes toward higher magnetic fields, can be proposed as the suitable MBN features alerting the incoming matrix breakage. Moreover, the higher MBN in the direction of exerted load at the expense of the perpendicular direction can be found as a result of domain walls realignment. [ABSTRACT FROM AUTHOR]

This study investigates alterations in magnetic anisotropy and the marked asymmetry in Barkhausen noise (MBN) signals after the uniaxial plastic straining of steel S235 obtained from a shipyard and used as standard structural steel in shipbuilding. It was found that the initial easy axis of magnetisation in the direction of previous rolling, and also in the direction of loading, becomes the hard axis of magnetisation as soon as the plastic strain attains the critical threshold. This behaviour is due to the preferential matrix orientation and the corresponding realignment of the magneto-crystalline anisotropy. Apart from the angular dependence of MBN, the asymmetry in the consecutive MBN bursts at the lower plastic strains is also analysed and explained as a result of magnetic coupling between the grains plastically strained and those unaffected by the tensile test. It was found that, by increasing the degree of plastic strain, the marked asymmetry in MBN tends to vanish. Moreover, the asymmetry in MBN bursts occurs in the direction of uniaxial tension and disappears in the perpendicular direction. Besides the MBN technique, XRD and EBSD techniques were also employed in order to provide a deeper insight into the investigated aspects. [ABSTRACT FROM AUTHOR]

This study deals with monitoring of Zn layer heterogeneity on the flange of steel road barriers using magnetic measurements. The Barkhausen noise technique is employed for such purpose, and parameters extracted from Barkhausen noise signals are correlated with the true thickness of the Zn layer. The true values of the Zn layer were obtained from the metallographic images, as well as the thickness gauge CM-8825FN (Guangzhou Landtek Instruments Co. Ltd., Guangzhou, China) device. It was observed that the diffusion region lies below the Zn protective layer, which makes the thickness of the Zn layer obtained from the CM-8825FN device thicker than that measured on the metallographic images. For this reason, the chemical gradient of Zn below the Zn layer can be reported, and it affects Barkhausen noise emission. Barkhausen noise decreases along with increasing thickness of the Zn layer, and Barkhausen noise envelopes are shifted to stronger magnetic fields. The number of strong MBN pulses drops down with the increasing thickness of Zn coating at the expense of the increasing number of the weak MBN pulses. The thickness of Zn coating can be polluted by the solidification of Zn melt after galvanizing. The presence of the diffusion layer dims the contrast between ferromagnetic and paramagnetic phases. [ABSTRACT FROM AUTHOR]

This study investigates the microstructure, residual stress state, and the corresponding magnetic anisotropy of the ship structure samples made of S235 steel after uniaxial tensile deformation. A non-destructive magnetic technique based on Barkhausen noise is employed for fast and reliable monitoring of samples exposed to the variable degrees of plastic straining. It was found that the progressively developed plastic straining of the matrix results in an alteration of the easy axis of magnetization, stress anisotropy (expressed in residual stresses state) as well as the corresponding Barkhausen noise emission. Moreover, remarkable non-homogeneity can be found within the plastically strained region, especially when the localized plastic straining takes place. [ABSTRACT FROM AUTHOR]