Search

A wavelength step-swept light source (WSSL) using a recirculating frequency shifter loop (RFSL) based on a single-side-band (SSB) modulator is proposed, in order to achieve a linear and fast wavelength-sweeping. The swept step can be tuned from 1.2 pm to 128 pm by adjusting a precise and stable radio frequency (RF) signal that is applied to the SSB modulator. The swept rate can be tuned up to 99 kHz in a range of over 5.12 nm. Wavelength-to-time mapping is used to measure static strain-induced or temperature-induced shifting of the reflected central wavelength of a fiber Bragg grating (FBG). Because of the high linearity of the light source, the interrogation linearity of the strain and the temperature are as high as 0.99944 and 0.99946, respectively. When a dynamic periodic strain applied to FBG sensor, the dynamic performance of the FBG sensor is successfully recorded in the time domain and its power spectral density of a fast Fourier transform (FFT) is calculated. The signal-to-noise ratio (SNR) of the power spectral density is over 40 dB for a 100 Hz dynamic strain and the calculated sensitivity is 0.048 με/Hz1/2. A sharp change in the strain frequency from 100 Hz to 500 Hz is captured in real time. [ABSTRACT FROM AUTHOR]

• Surface degradation of Ge in vacuum on different laser conditions are showed. • The influences of processing parameter and material failure behavior are analyzed. • Mechanism in damage variation with laser ablation is compared in air and vacuum. • Damage mechanism contains thermal effect, plasma shock wave and mechanical stress. Laser-induced damage of germanium (Ge) sheets plays a key role to estimate the lifetime of optical components in the vacuum and space irradiation environment. However, the dependence between the degrees of laser-induced surface damage and nanosecond pulsed irradiation remains unclear for Ge sheet. Here, we investigate damage morphology and the growth characteristic of Ge sheets under different conditions and measure the laser-induced damage threshold (LIDT) in vacuum. Our results reveal that optical reflectivity of Ge in vacuum chamber falls 92% because of the defective sites on the damaged surface. The area, the depth and the size of the damage crater increase but the hillock height and the surrounding thermal diffuse area decrease along with the increase of vacuum degree. The thermal effect, the failure effect of plasma shock wave and the mechanical stress are analyzed to be the main mechanism in the laser damage. The combined experimental and theoretical work gives an insight into the change of surface damage and material failure behavior, hence broadens the potential applications of Ge sheets in areas of laser material manufacturing and laser processing. [ABSTRACT FROM AUTHOR]