Search

This paper presents an extensive experimental analysis of hot carrier degradation (HCD) due to DC and large-signal RF stress on a power amplifier (PA) cell in the sub-7GHz frequency band. The reported PA cell is fabricated in a 45-nm RFSOI technology and consists of a single n-channel floating body partially depleted SOI FET. The impact of HCD on the class, conduction angle ($\theta $), and performance of the PA cell is analyzed under DC and large-signal RF stress conditions. Generation of defects and their types, i.e., whether oxide or interface traps, are understood using a combination of RF and DC stress conditions. Our detailed analysis distinguishes HCD mechanisms dominated by oxide and interface traps by studying time slope exponents, changes in the subthreshold swing, threshold voltage, and peak transconductance. The impact of RF stress on the PA cell lifetime is also extracted using a semiempirical model. [ABSTRACT FROM AUTHOR]

Recently, back-end-of-line (BEOL) compatible indium oxide (In2O3) thin-film transistors (TFTs), grown by atomic layer deposition (ALD) with channel thickness of ~1 nm and channel length down to 40 nm, have achieved a record high drain current of 2.2 A/mm at ${V}_{\textit {DS}}$ of 0.7 V. A systematic characterization of the reliability issues, such as positive bias temperature stress (PBTS) and hot carrier degradation (HCD), would allow its immediate integration into innovative ICs, such as 3D-stacked SRAM or on-chip bridge for mixed-voltage systems. Surprisingly, PBTS and HCD are both characterized by a universal two-stage threshold voltage shift ($\Delta \!{V}_{\textit {th}}$ , a positive shift followed by a temperature-activated negative shift). This is attributed respectively to electron trapping/trap-generation and hydrogen-assisted formation of donor-traps. These competing mechanisms of $\Delta ~{V}_{\textit {th}}$ depend on the stress voltages and stress temperature. Unlike traditional logic transistors, HCD in BEOL-TFTs is strongly correlated to PBTS, caused by the much stronger vertical field in an ultra-thin device. Overall, this high-performance BEOL-transistor is remarkably reliable, with a relatively small $\Delta ~{V}_{\textit {th}}$ under PBTS/HCD stress conditions at room temperature (RT). However, self- and mutual heating of BEOL interconnect levels and the resultant threshold voltage variability must be mitigated/managed for its successful integration in various neuromorphic circuits. [ABSTRACT FROM AUTHOR]

Hot-carrier degradation (HCD) is investigated in silicon trench MOSFETs with field plate compensation. With the aid of charge pumping (CP), it is possible to obtain the total trap densities created by the hot-carrier stress. We will demonstrate that, in combination with TCAD simulations, profiling of the spatial distribution of the damage at the interface is possible in the accessible regions by extending the well-known reverse-bias CP method for planar devices to trench devices. Four process variations are investigated to show the impact of the cell geometry on the degradation location with the results being confirmed by capacitance measurements. It is found that the impact ionization rate seen in drift-diffusion TCAD simulations provides a straightforward means to estimate the defect locations. [ABSTRACT FROM AUTHOR]

The temperature dependence of defect generation due to hot-carrier stress (HCS) is investigated in long-channel nMOSFETs with a SiO2 insulator. In order to improve the understanding of hot-carrier degradation, we systematically investigate the impact of temperature on the HCS-induced trap densities and their energetic profiles using standard and spectroscopic charge pumping (CP). With the aid of polyheaters, which can rapidly change the device temperature, recovery of the degradation at higher temperatures is minimized by quickly switching the temperature to the characterization temperature of −60 °C. In order to be able to quantitatively analyze the trap profiles measured with spectroscopic CP, a method for finding the correct capture cross section is suggested. Both CP methods yield comparable results, and it is shown that the same types of defects are created at all temperatures. In agreement with the literature, lower stress temperatures during HCS result in the creation of a larger number of defects for our long-channel devices. [ABSTRACT FROM AUTHOR]

As fast charging being a comprehensive application in universal serial bus (USB) type-C products, the high-power delivery may cause the USB type-C interface in the high risk of surge events. Therefore, a switch realized by high voltage N-type metal oxide semiconductor transistor (HVNMOS) has been added to the configuration channel (CC) pin to prevent the internal circuits from surge damage. However, hot carrier degradation (HCD) on the HVNMOS was induced by surge events, especially when the HVNMOS was operating in the ON-state. To mitigate HCD on the HVNMOS switch during surge events, a new over-voltage protection (OVP) design with selected voltage-level detection was proposed and verified in a 0.15-μm BCD technology. The proposed OVP circuit with a positive feedback is designed to turn off the gate of the HVNMOS switch for a longer time when surge zapping on the CC pin. The experimental results from silicon chip have successfully verified the proposed OVP structure in device level and circuit level, respectively. [ABSTRACT FROM AUTHOR]

A SPICE compatible compact modeling framework is proposed for the time kinetics of threshold voltage shift ($\Delta {V}_{T}$) in FinFETs subjected to hot carrier degradation (HCD) stress. The model is valid for the entire drain (${V}_{D}$) and gate (${V}_{G}$) voltage space and calculates the generation of interface traps for pure HCD ($\Delta {V}_{\text {IT-HC}}$) and for negative bias temperature instability (NBTI) ($\Delta {V}_{\text {IT-BT}}$), hole trapping ($\Delta {V}_{\text {HT}}$), and electron trapping ($\Delta {V}_{\text {ET}}$) as necessary, and considers the self-heating effect (SHE). The model is validated by using ultrafast (10- $\mu \text{s}$ delay) measured data from replacement metal gate (RMG) silicon germanium (SiGe) p-FinFETs having a different fin length (FL) and different nitrogen (N%) in the gate insulator stack. A calibrated TCAD framework is used to verify the impact of pure NBTI for varying ${V}_{G}$ and ${V}_{D}$ stress in the presence of SHE but no HCD. [ABSTRACT FROM AUTHOR]

Comprehensive review and reanalysis are done on previously reported experimental hot carrier degradation data in various MOSFET architectures. The universality of time kinetics and voltage acceleration of degradation, obtained using multiple measurement techniques, is analyzed for OFF- and different ON-state modes in long and short channel planar and drain extended MOSFETs and FinFETs. The similarities and differences of such diverse measurement methods are analyzed. Existing theories are qualitatively benchmarked against this analysis, and capabilities as well as inconsistencies of those theories are discussed. [ABSTRACT FROM AUTHOR]