Search

Multi-scale reflection seismic data, from deep-penetration to high-resolution, have been analyzed and integrated with near-surface geophysical and geochemical data to investigate the structures and gas hydrate system of the Formosa Ridge offshore of southwestern Taiwan. In 2007, dense and large chemosynthetic communities were discovered on top of the Formosa Ridge at water depth of 1125 m by the ROV Hyper-Dolphin. A continuous and strong BSR has been observed on seismic profiles from 300 to 500 ms two-way-travel-time below the seafloor of this ridge. Sedimentary strata of the Formosa Ridge are generally flat lying which suggests that this ridge was formed by submarine erosion processes of down-slope canyon development. In addition, some sediment waves and mass wasting features are present on the ridge. Beneath the cold seep site, a vertical blanking zone, or seismic chimney, is clearly observed on seismic profiles, and it is interpreted to be a fluid conduit. A thick low velocity zone beneath BSR suggests the presence of a gas reservoir there. This “gas reservoir” is shallower than the surrounding canyon floors along the ridge; therefore as warm methane-rich fluids inside the ridge migrate upward, sulfate carried by cold sea water can flow into the fluid system from both flanks of the ridge. This process may drive a fluid circulation system and the active cold seep site which emits both hydrogen sulfide and methane to feed the chemosynthetic communities. [ABSTRACT FROM AUTHOR]

What is the structural geometry of the southern Taiwan transition zone from the Manila subduction offshore to the Taiwan onshore collision, specifically in the western flank of the Hengchun peninsula that corresponds to the summit of the Manila subduction accretionary prism? This paper aims to decipher the onshore/offshore structures and tectonic deformation that occur west of the Hengchun Ridge through both detailed topographic analyses and interpretation of numerous old and new seismic profiles. From a geomorphic point of view, both Fangliao and Hongchai submarine canyons have different structural and landslide implications. The Fangliao Canyon is guided by a N-S elongated mud diapir (the Fangliao Ridge), intruding an inferred N010°E trending, left lateral strike-slip fault zone. Conversely, the arcuate and concave shape of the Hongchai Canyon appear to follow the crown and the northern boundary of a newly recognized Hongchai submarine landslide situated on the steep western flank of the onshore asymmetric Hengchun Anticline. Our results highlight that both Fangliao and Hengchun Faults are linear, near-vertical left-lateral strike-slip faults. They converge onshore to the Chaochou Fault. This study demonstrates that neotectonics combine with morphostructural analysis of the submarine canyon drainages lead to a better comprehension of the present deformation in the northern part of the Manila accretionary prism. [ABSTRACT FROM AUTHOR]

Abstract: Distribution and architecture of slope basins across a continental slope vary as a consequence of accommodation forming, sediment dispersal rates, canyon cutting, sediment filling and different sediment transporting mechanisms. The area offshore Southwestern Taiwan is generally recognized as having active tectonics and high sediment deposition rates. In the Gaoping Slope, slope basins are formed by the developments of folds, faults and diapiric intrusions. Portions of the sediments discharged from the Taiwan mountain belt have been trapped in these basins in the Gaoping Shelf and Gaoping Slope. The rest of the sediments were transported to deep sea areas through submarine canyons. This complex system of folds, faults, diapirs, slope basins, submarine canyons, and sediment deposits has also readjusted the morphology of the Gaoping Slope. This study examines the linkage between accommodation spaces of tectonic and sedimentary processes in the Gaoping Slope through seismic facies analysis. Four seismic facies which include convergent-symmetrical facies, convergent-baselapping facies, chaotic facies, and parallel and drape facies, and different deposition patterns have been recognized in the Gaoping Slope basins. The thick mud layers which are regarded as the source of diapiric intrusions are first observed beneath the basin. Strata records show that the accommodation spaces in various slope basins have increased or decreased during different stages of basin evolution. Because of the competition between regional tectonism (accommodation space variations) and sediment routing distance from provenance to depository (sediment input variations), most under-filled basins lie in the lower slope domain in the Gaoping Slope, but also in the upper slope domain east of the Gaoping Submarine Canyon. This observation suggests that in the inner Gaoping Slope west of the Gaoping Submarine Canyon, sediment deposition rate is higher than the basin subsidence rate, the topography of the upper slope domain there is “healed”, and most sediments are overfilled in the slope basins now. Besides the sequential steps of sedimentary disposal in the filling-and-spilling model, we have also observed evidences which indicate that mass movements and submarine canyons in the area have significantly changed the sediment dispersal patterns in the slope basins of the Gaoping Slope. We suggest that although filling-and-spilling is a key sedimentary process in the Gaoping Slope, tectonic activities, mass wasting events and canyon feeding processes have diversified sediment transporting mechanisms from the inner to outer slopes in the area offshore Southwest Taiwan. [Copyright &y& Elsevier]

Abstract: Off southwest Taiwan, a west-advancing orogenic wedge has obliquely impinged on the northern continental slope of the South China Sea (SCS) margin. We analyzed a dense grid of multi-channel seismic profiles to reveal the tectonic features in this oblique collision setting. In the upper SCS slope and adjacent to the accretionary wedge, the rifted continental margin is characterized by a deep-seated, oceanward-dipping, listric and active normal fault with rotated hangingwall strata beneath the slope. To the west of this slope segment, the mid-Oligocene to Recent post-breakup sediments show prograding and aggrading shelf-margin clinoforms that cover a series of small, possibly Paleogene, rift basins. In the submarine accretionary wedge, a series of west-vergent, NNW-striking fold-and-thrust structures characterizes the lower wedge, which can be further divided into frontal and rear segments with distinct structural features. The frontal segment is characterized by four west-vergent blind thrusts with gently folded limbs. In contrast, the rear, arcward segment is characterized by west-vergent, emergent and imbricate thrusts with tilted beds truncated at the hangingwalls. Strata within slope basins are tilted arcward, with dips that increase with depth, indicating continued relative uplift along thrust planes during sedimentation. Pulsed thrust activity is further evidenced by an array of arcward-dipping unconformable surfaces with westward onlapping strata in the basins. Longitudinal sedimentary tapering of pre-orogenic sediments correlates strongly with curvature of the submarine frontal accretionary belt, suggesting that pre-orogenic sediment thickness is the major control on the geometry of frontal structures. The preexisting SCS slope that lies obliquely in front of the advancing accretionary wedge has impeded the advancing of frontal folds resulting in a successive termination of folds against and along strike of the SCS slope. The existence of the SCS slope also leads the strike of impinging folds with NNW-trend to turn more sharply to a NE-strike, parallel to strike of the SCS slope. Our analysis shows that the pre-orogenic mechanical/crustal heterogeneities and seafloor morphology exert strong controls on the thrust-belt development in the incipient Taiwan arc-continent collision zone. [Copyright &y& Elsevier]

Although the Lichi mélange has been studied intensively over the last decade, its enigmatic nature has generated debates regarding its origin and evolution. Two prominent models have been proposed to explain the Lichi melange: the olistostrome model with slumping sediments and the tectonic collision model with intensive shearing. Neither model can explain what causes the interpreted slumping and complex faulting processes for the sediments. Here, we study the Lichi melange using a time–space equivalence approach, in which the tectonics of the offshore continuation of the Lichi mélange should represent an earlier stage in its evolution. Our study of marine multichannel seismic data suggested that the backthrusts in the accretionary prism propagate arcward above and within the deforming forearc and arc basement to incorporate the sediment and basement materials into the rear of the accretionary prism. Therefore, we proposed the “retrowedge evolution model” whose novel key feature is that the irregular topography of the arc basement affects the taper angle of the retrowedge. The retrowedge has a greater taper than the minimum taper of the prowedge, so the slope can be steeper, and thus favors gravitational failure. Such processes would generate complex faulting and slumping processes in the backthrusted forearc ridge and basin. In sum, this retrowedge model reconciles the mixture of slumping and faulting processes found in the Lichi mélange. [ABSTRACT FROM AUTHOR]

Whether the formation of the isolated sand body deposition in the forebulge area of a foreland basin system is structure- or deposition-controlled has puzzled geologists for decades, although sand body deposition is generally believed to be indicative of the position of the flexural forebulge in a foreland basin. The formation of a modern sand body in the forebulge area is thus examined by multi-scale geophysical observations based on combined reflection seismic profiles and compressed high-intensity radar pulse (CHIRP) profiles across the sand deposition along the forebulge of the Western Taiwan Foreland Basin (WTFB), which is a Late Miocene-present foreland basin in the overfilled stage. These profiles suggest that the accumulation of the sand deposits along the forebulge of the WTFB is not directly associated with forebulge faultings. The relief map of the forebulge deposit substratum shows a northwestward tilting slope, and the isopach of the forebulge sand body indicates that a large part of the sand body accumulated along the axis of the Taiwan Strait and the subdued forebulge of the WTFB. The difference between the prevailing directions of tidal currents between the Taiwan Strait and the East China Sea reflects the probable sedimentary influence of the cratonward migrating fold-thrust belt within a foreland shelf. We suggest that the formation and distribution of the sand deposits along the forebulge of the WTFB are generally controlled not only by the transverse downslope sedimentation but also longitudinal hydrodynamic processes at distal parts of the foreland basin. Our explanation provides a plausible tectono-sedimentary cause of the sand body deposition in the forebulge area in an overfilled foreland basin. The sedimentary dynamics of the sand body in the Taiwan Strait may be applicable for understanding the formation of isolated sand bodies in the distal part of the Cretaceous Western Interior Foreland Basin. [ABSTRACT FROM AUTHOR]

Abstract: Southern Taiwan and its offshore area lie in the region where the Luzon volcanic arc initially collides with the rifted China continental margin. Because of the incipient arc-continent collision, the structures vary markedly along-strike the collision zone so as the patterns of seismicity. We use new seismic reflection profiles and integrate existing data to reveal major tectonic features and potential seismogenic faults of the study area. The accretionary wedge in the incipient arc-continent zone can be divided into the lower slope, upper slope, and backthrust domains, respectively. These structural domains reflect different aspects of wedge deformation, and exhibit significant structural variations along-strike. Reflection seismic data show that the prominent seismogenic structures in the Taiwan incipient collisional wedge include: (1) frontal decollement beneath the lower-slope domain, (2) out-of-sequence thrusts bordering the lower-slope and upper-slope domains, (3) megathrust that cuts into the oceanic (?) basement beneath the upper-slope domain, and (4) the Chaochou-Hengchun faults in the onshore upper-slope domain. Thermal regime for those structures indicates that the megathrust and part of frontal decollement are seismogenic. The geometry of the frontal decollement, out-of-sequence thrusts and megathrust is analogous to those observed along the Nankai prism of Japan, so that they are possibly capable of generating great earthquakes as shown in the Nankai Trough. Beneath the lower and upper-slope domains off SW Taiwan, the seismicity is characterized by mantle earthquakes with the accretionary wedge being largely aseismic. We interpret the lack of prominent seismicity within the accreted wedge to result from excess fluid pressure that has significantly weakened the wedge materials and fault zones and therefore results in less seismicity. The predominant mantle earthquakes beneath the accretionary wedge, however, may result from water-enriched mantle materials infiltrated during previous Mesozoic subduction event and later rift events. The volatile contents may have significantly reduced the rigidity of the mantle, leading to the mantle being more susceptible for brittle deformation and hence anomalously high seismicity. [Copyright &y& Elsevier]

The structural geometry, kinematics and density structure along the rear of the offshore Taiwan accretionary prism were studied using seismic reflection profiling and gravity modeling. Deformation between the offshore prism and forearc basin at the point of incipient collision, and southward into the region of subduction, has been interpreted as a tectonic wedge, similar to those observed along the front of mountain ranges. This tectonic wedge is bounded by an east-dipping roof thrust and a blind, west-dipping floor thrust. An east-dipping sequence of forearc-basin strata in the hanging wall of the roof thrust reaches a thickness in excess of 4 km near the tip of the interpreted tectonic wedge. Section restoration of the roof sequence yields an estimate of 4 km of shortening, which is small compared with that inferred in the collision area to the north, based on the variation in distance between the apex of the prism and the island arc.Previous studies propose that either high-angle normal faulting or backfolding has exhumed the metamorphic rocks along the eastern flank of the Central Range in the collision zone on land. To better constrain the initial crustal configuration, we tested 350 crustal models to fit the free-air gravity anomaly data in the offshore region to study the density structure along the rear of the accretionary prism in the subduction and initial collision zones before the structures become more complex in the collision zone on land. The gravity anomaly, observed in the region of subduction (20.2°N), can be modeled with the arc basement forming a trenchward-dipping backstop that is overlain by materials with densities in the range of sedimentary rocks. Near the point of incipient collision (20.9°N), however, the free-air gravity anomaly over the rear of the prism is approximately 40 mgal higher, compared with the region of subduction, and requires a significant component of high density crustal rocks within the tectonic wedge. These results suggest that the forearc basement may be deformed along the rear of the prism, associated with the onset of collision, but not in the subduction region further to the south. [Copyright &y& Elsevier]