Search

Nickel ferrite owns a lot of advantages as electrode materials for supercapacitor, such as high energy density and excellent theoretical capacity. Whereas, the electrochemical performances of NiFe 2 O 4 in terms of rate performance and cycle stability are not satisfactory due to the low conductivity. While carbon fiber is a kind of material with high conductivity. Hence, NiFe 2 O 4 @ slit modified hollow carbon fiber is obtained through the coaxial electrospinning method. The slits on hollow carbon fibers are beneficial to the contact of inner NiFe 2 O 4 nanoparticles with electrolyte. Results of electrochemical tests show that at a current density of 1 A/g, the specific capacitance of NiFe 2 O 4 @ slit modified hollow carbon fiber is calculated to be 225.4 F/g, higher than that of NiFe 2 O 4 nanoparticles of 134.8 F/g. Moreover, a better cycle and rate performances (100 % vs 80 %; 71.9 % vs 47.5 %) are achieved. This work displays that slit modified hollow carbon fiber can improve the electrochemical performance of NiFe 2 O 4 efficiently. [Display omitted] • Carbon fibers are introduced to enhance the rate and cycle performances of NiFe 2 O 4. • Slits are obtained utilizing Al 2 O 3 sacrificial hard templates. • Slits are beneficial to the contact of NiFe 2 O 4 and electrolyte. [ABSTRACT FROM AUTHOR]

Abstract NiFe 2 O 4 (NFO) with different morphologies were successfully synthesized via a facile hydrothermal method of different precipitants. Results showed that the NFO obtained using urea as precipitant (NFO-U) formed a nanosheet shape, while the powders prepared using CH 3 COONa (NFO-C) exhibited a nanoparticle structure. Both of the two NFO showed a good crystallinity. Conclusion was reached through the results of BET and electrochemical tests that layer structure would improve the properties through a larger specific surface area. Encouragingly, the specific capacitance of NFO-U could arrive 240.9 F/g at the current density of 1 A/g. It was worth noting that the cycle performance of NFO-U was excellent, of which the specific capacitance improved to 128% after 2000 cycles. In addition, an asymmetric supercapacitor (ASC) system was constructed utilizing NFO-U as positive electrode while activated carbon (AC) as negative electrode. The two-electrode system showed a good performance with energy density of 10.15 Wh/kg at a power density of 140 W/kg. Therefore, the construction of sheet-like structures greatly improved the electrochemical performance of NiFe 2 O 4 materials. [ABSTRACT FROM AUTHOR]

In the recent years, MXenes (2D transition metal carbides, carbon nitrides and nitrides) and its precursor MAX phases have been widely investigated in electrochemical research. In this research, we successfully prepared a core-shell structured compound——Ti 3 C 2 @Ti 2 SnC/CNFs (MXene@TSC/C) as an anode material for lithium ion battery via electrospinning method. Results showed that this type of compound has a specific capacity of 288.9 mAh·g−1 at the current density of 0.4 A g−1 after 300 cycles, accompany with a retention rate of capacity of 105.4% in the rate performance test. These performances were benefit from the core-shell structured CNFs and Ti 3 C 2 MXenes. This work supported a novel way to improve the electrochemical property of MXene and MAX phases, which was expected to further explored. [ABSTRACT FROM AUTHOR]

A sol-gel method was employed for the synthesis of new High-entropy boride (HEB) powders, (Hf 0.2 Nb 0.2 Cr 0.2 Ta 0.2 Mo 0.2)B 2 , with nanoscale. The as-synthesized powders were obtained at a relatively low temperature of 1650 °C, and had small average particle size of 62.09 nm. X-ray diffraction confirmed that the (Hf 0.2 Nb 0.2 Cr 0.2 Ta 0.2 Mo 0.2)B 2 powders were hexagonal single-phase without any oxide impurities. In particular, electrochemical performance of the (Hf 0.2 Nb 0.2 Cr 0.2 Ta 0.2 Mo 0.2)B 2 powders with multiphase and high-entropy single phase were investigated using a three-electrode system. The improved electrochemical performance of the HEB powders is realized, with 27% higher in specific capacitance compared to the powders with multiphase. The HEB powders electrode exhibits a high capacitance retention of 97.03% after 5000 cycles. [ABSTRACT FROM AUTHOR]

Morphology of transition metal oxide largely affects its electrochemical energy storage properties. This also applies to its composites. In this paper, NiFe 2 O 4 /Graphene nanosheets composites (NFO/GNSs) are successfully prepared by a facile hydrothermal method. NiFe 2 O 4 (NFO) in the sample exhibits a unique nanosheet morphology, vertically arranging on the graphene nanosheets (GNSs). Microscopically, NFO nanosheets interpenetrate on the surface of graphene to form a continuous network structure. The sample exhibits excellent specific capacitance and rate performance. It is worth mentioning that the specific capacitance increases to 140% after 5000 cycles, showing superior cycle stability. This may be due to the conductive network formed by NFO nanosheets and GNSs. Excellent electrochemical performance indicates excellent application prospects of materials in supercapacitor electrodes. Image 1 • Unique NiFe 2 O 4 nanosheets structure with graphene nanosheets was successfully prepared by a hydrothermal method. • NiFe 2 O 4 nanosheets/graphene performed a better specific capacitance, arriving at 464.15 F/g at current density of 1 A/g. • The network structure formed between NiFe 2 O 4 nanosheets and graphene nanosheets provides excellent cycle performance. [ABSTRACT FROM AUTHOR]

Transitional metal nitrides (TMNs) are regarded as comparatively promising electrode materials for supercapacitor due to the high electronic conductivity, good corrosion resistance and special electron structure. Herein, in this work a heterostructure Co 2 N-Ni 3 N nanosheets-nanowires arrays grown on Ni foam (NF) are designed and synthesized by a simple hydrothermal reaction and nitriding treatment. The prepared Co 2 N-Ni 3 N/NF nanoarrays has a high electrical conductivity, abundant surface active sites, charge transfer channels and the synergy effect between each component, which makes it exhibit outstanding electrochemical performance. Electrochemical test results revealed that the areal capacitance of Co 2 N-Ni 3 N/NF was 2.17 F cm−2 at 1 mA cm−2 using a three-electrode system in 1 M KOH. Meanwhile, when the current density increases to 20 mA cm−2, it can still retain 62.21% of the original capacitance, suggesting a good rate capability. In addition, in two-electrode test with Co 2 N-Ni 3 N/NF as the positive electrode and activated carbon as the negative electrode, a maximum energy density of 145.65 μWh cm−2 is shown when the power density is 0.75 mW cm−2. And it has 85.90% capacitance retention after 5000 cycles. [Display omitted] • Unique Co 2 N-Ni 3 N nanoarray heterostructure was successfully synthesized. • Co 2 N-Ni 3 N/NF achieves an areal capacitance 2.17 F cm-2 at current density of 1 mA cm-2. • The Co 2 N-Ni 3 N/NF // AC exhibits good electrochemical performance in two-electrode tests. [ABSTRACT FROM AUTHOR]

Core-shell hierarchical structured composites have demonstrated great advantages in numerous energy storage devices. In particular, structured composites with rationally structural components and controllable morphology are the most effective in enhancing electrochemical properties. In this work, MnO 2 @NiCo 2 O 4 @Ti 3 SiC 2 /CC (carbon cloth) core-shell hierarchical structured composites were designed and successfully synthesized via electrospinning followed by a two-step hydrothermal reaction. The Ti 3 SiC 2 /CC nanofibers and core-shell nanoarrays were able to improve the specific capacitance and cycling stability. In the three-electrode system, the specific capacitance of MnO 2 @NiCo 2 O 4 @Ti 3 SiC 2 /CC was observed as 1938.2 F/g at a current density of 1 A/g, while the rate capability retention was observed as 81.7% between 1 and 10 A/g. Furthermore, a superior cycling stability was observed following 5000 cycles with a specific capacitance retention rate of 55.4%. Employing MnO 2 @NiCo 2 O 4 @Ti 3 SiC 2 /CC as the all solid-state supercapacitor positive electrode exhibited a high energy density of 58.0 W h/kg at the power density of 800 W/kg. Results demonstrate the potential of the MnO 2 @NiCo 2 O 4 @Ti 3 SiC 2 /CC as an electrode material with phenomenal electrochemical properties for supercapacitors. [ABSTRACT FROM AUTHOR]

Bimetallic carbides have aroused wide attention for energy-storage applications recently. In this work, one-dimensional Fe 2 MoC/CNFs (Fe 2 MoC/C nanofibers) are successfully synthesized via a facile electrospinning method for the first time. To obtain the most integrated structure between the Fe 2 MoC nanoparticles and carbon nanofibers, we explore the optimal heating rate during the carbonization treatment. Fe 2 MoC/CNFs exhibits an integrated one-dimensional structure under 800 °C with a heating rate of 5 °C/min. As revealed in the experimental results, Fe 2 MoC/CNFs possesses a high specific surface area of 196.9 m2/g, a high specific capacitance of 347.8 F/g at the current density of 1 A/g, an excellent rate capability of 91% capacitance retention from 1 A/g to 40 A/g, and shows superior cycling stability with the capacitance retention of about 85.6% and Coulombic efficiency of about 100% after 5000 cycles. An asymmetric supercapacitor coin-cell device using Fe 2 MoC/CNFs as the positive electrode displays an energy density of 14.5 Wh/kg at a power density of 300 W/kg and an outstanding cycling life of 93% retention after 5000 cycles. The impressive electrochemical performance indicates that the Fe 2 MoC/CNFs composite is a promising material for efficient supercapacitors. Image 1 • Fe 2 MoC nanofibers can be prepared via a facile electrospinning method. • Fe 2 MoC/CNFs-5 exhibits a superior rate capability and cycle stability. • ASC coin-cell device shows a promising energy and power density. [ABSTRACT FROM AUTHOR]