Search

With the increase of electricity demand and the rapid development of renewable energy generation, it is becoming more and more important to ensure the safety and stability of power grid, where a superconducting fault current limiter (SFCL) could play an important role. In recent years, a lot of research work has been done in China on the application of high temperature superconducting (HTS) power technology, especially in the aspects of superconducting fault current limiting technology, superconducting fault current limiting-breaking technology, superconducting fault current limiting- magnetic energy storage technology, and superconducting fault current limiting transformer technology. A number of demonstration projects on SFCL were also conducted. In this paper, the research progress of HTS fault current limiters (both AC and DC) in China in recent years is introduced, including the completed projects and the on-going work. The possible application direction of SFCL in the future is proposed. [ABSTRACT FROM AUTHOR]

The resistive-type superconducting fault current limiter (R-SFCL) is simple in configuration, near zero impedance at normal state, and can be quickly triggered by the fault current. So, it is a possible solution to suppress the fault current in the power grid. In this paper, the design and development of a 220-kV R-SFCL were reported. The core component of it is a module constructed by 128 bifilar coils. The bifilar coils are connected in series and parallel to form the module according to the application requirements. The bifilar coils are made of 12-mm-wide steel-stabilized 2G tapes, while 16 bifilar coils are connected in parallel to form a sub-module and 8 sub-modules are connected in series to form the module. For this fault current limiter, 10.75-km 2G tapes are used in total, and the resistance of the R-SFCL module is 4.5 Ω at 300 K. Besides, the half-size sub-module and the cryogenic insulation support (CIS) are developed and tested. [ABSTRACT FROM AUTHOR]

The resistivetype superconducting fault current limiter (R-SFCL) is simple in structure, near zero impedance at normal state and can be quickly triggered by the fault current. Thus, it is a possible solution to limit the fault current in the power grid. In this paper, we report the fabrication and test for an R-SFCL module The R-SFCL module consists of seven bifilar coils connected in parallel, which were wound with two parallel 2G tapes. A 5mm spacer was co-wound between adjacent turns to act as the highvoltage insulation. In the tests, we test the current distribution among the bifilar coils, and then simulated short-circuit tests were conducted on the module to obtain its performance under fault current surge. [ABSTRACT FROM AUTHOR]

With the increasing depletion of fossil fuels and growing environmental pressure, the mankind has got known the need to vigorously develop the renewable energy and the energy-saving technology. The high Tc superconducting (HTS) power technology will be very helpful to enhance the stability, reliability, and efficiency and transmission capacity of the power grid which would be dominated by the renewable energy. In this paper, we will report the installation and operation of a 10 kV HTS power substation which includes a 75 m/1.5 kA HTS power cable, a 10 kV/1.5 kA HTS fault current limiter, a 1 MJ/0.5 MVA high Tc SMES and a 630 kVA/10 kV/0.4 kV HTS power transformer. [ABSTRACT FROM PUBLISHER]

Research of the resistance characteristics of YBCO tape under short-time DC large current impact is the foundation of the developing DC superconducting fault current limiter (SFCL) for voltage source converter-based high voltage direct current system (VSC-HVDC), which is one of the valid approaches to solve the problems of renewable energy integration. SFCL can limit DC short-circuit and enhance the interrupting capabilities of DC circuit breakers. In this paper, under short-time DC large current impacts, the resistance features of naked tape of YBCO tape are studied to find the resistance – temperature change rule and the maximum impact current. The influence of insulation for the resistance – temperature characteristics of YBCO tape is studied by comparison tests with naked tape and insulating tape in 77 K. The influence of operating temperature on the tape is also studied under subcooled liquid nitrogen condition. For the current impact security of YBCO tape, the critical current degradation and top temperature are analyzed and worked as judgment standards. The testing results is helpful for in developing SFCL in VSC-HVDC. [ABSTRACT FROM AUTHOR]

Recent years, voltage source converter-based multi-terminal high voltage DC power transmission (MTDC) is widely developed in the world. However, it is difficult for the existing DC breaker to cut off the fault transmission line with large short-circuit fault current. Then, it would be helpful to develop DC fault current limiter for the MTDC system. In this paper, DC superconducting fault current limiter (DCSFCL) is proposed to limit fault current. In order to study the resistance-time performance of the DCSFCL under the rapid change of fault current, a simulation model of Zhoushan MTDC system with DCSFCL is established, and the current-limiting performance of the DCSFCL at different location of the grid is studied. The simulation results show that DCSFCL can effectively limit short-circuit current and improve the operation reliability of MTDC system. [ABSTRACT FROM AUTHOR]

Superconducting fault current limiter (SFCL) is a prospective electric devices connected in series in power grid to limit short-circuit current. A 10.5 kV/1.5 kA 3-phase SFCL with HTS coil of 6.24 mH was developed at IEECAS in China in 2005, which was operated in a local power grid in Hunan province for more than 11,000 h, and integrated lately in a superconducting power substation in Baiyin city in 2011 and is still running safely and reliably. In order to reduce the fault response time and enhance the performance of the SFCL, we analyzed the structure characteristics of the SFCL and discussed the variation of currents and voltages of the HTS coil and the bridge during the fault time. The simulation and tests results of power system validate the feasibility of the fast fault identification method. [ABSTRACT FROM AUTHOR]