Search

Designing a surface recognition layer with high anti-fouling ability, high affinity, and high specificity is an important issue to produce high sensitivity biosensing transducers. In this study, a self-assembled monolayer (SAM) consisting of a homogeneous mixture of oligo(ethylene glycol) (OEG)-terminated alkanethiolate and mercaptohexadecanoic acid (MHDA) on Au was employed for immobilizing troponin T antibody and applied in detecting cardiac troponin T by using surface plasmon resonance (SPR). The mixed SAM showed no phase segregation and exhibited human serum albumin resistance, particularly with an antibody-immobilized surface. X-ray photoemission spectra revealed that the chemical composition ratio of OEG to the mixed SAM was 69% and the OEG packing density was 82%. The specific binding of troponin T on the designed surface indicated a good linear correlation (R=0.991, P<0.0009) at concentrations lower than 50 μgmL(-1) with the limit of detection of 100 ngmL(-1) using a SPR measuring instrument. It is concluded that the mixed SAM functions as designed since it has high detection capability, high accuracy and reproducibility, as well as shows strong potential to be applied in rapid clinical diagnosis for label-free detection within 2 min., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Interface phenomena refer to the phenomena caused by various physical and chemical processes occurring at phase interfaces. These phenomena can include adhesion, friction, lubrication, evaporation, condensation, adsorption, monolayer formation, and other phenomena and are applied in many fields, such as food, papermaking, rubber, material science, energy, and biomedicine. However, traditional detection equipment cannot meet the interface phenomena observation needs because the information detected by techniques such as electrochemistry, spectroscopy, chromatography, and mass spectrometry is limited, as are the sensitivity and minimum detection limit. Surface plasmon resonance (SPR) combined technology is a powerful tool for investigating interface phenomena. This paper reviews all combination technologies of SPR with various conventional detection systems, emphasizing the combination with electrochemistry, Raman spectroscopy, and mass spectrometry. These technologies can observe interface phenomena through SPR and provide redox, molecular structure, functional group change, and other information. Through this information, the reactions on the interface can be made clearer and more controllable, which plays an important role in practical detection. In the future, SPR combined technology will mainly develop toward signal enhancement, light source coupling mode, and sensor chip design, and SPR will be combined with various detection technologies to achieve real‐time in situ detection of interface phenomena. [ABSTRACT FROM AUTHOR]

Highlights • A rapid-prototyping angle-scanning Surface plasmon resonance was presented. • FDM 3D printing technology was utilized to realize rapid prototyping and cost down manufacture. • Aptasensor was utilized to detect glycated hemoglobin (HbA1c) directly. • The linear detection response of HbA1c appeared in the range from 18 to 147 nM with a detection limit of 1 nM. Abstract Diabetes mellitus is one of the most common noncommunicable diseases in the world. Fasting blood glucose level is one of the diabetes diagnostic criteria, but it is readily affected by stress, exercise and many other factors. Glycated hemoglobin (HbA1c) is an important clinical index for diabetes and related diseases. In this study, a cheaper, rapid-prototyping, high-sensitivity angle-scanning surface plasmon resonance (SPR) was developed by fused deposition modeling (FDM) 3D printing technology for HbA1c detection. The sensor chip is based on an aptamer that has high affinity and high specificity to HbA1c. The results showed that this HbA1c-specific aptamer had high specificity for HbA1c, and the calculated K D was 6.13 × 10−8 M. The linear detection response of HbA1c appeared in the range of 18–147 nM, with a detection limit of 1 nM. This SPR HbA1c detection system could be a promising platform for developing clinical point-of-care diagnostic applications. [ABSTRACT FROM AUTHOR]

Glycated hemoglobin (HbA1c) has been widely explored as an important marker for monitoring and diagnosing diabetes. Due to the advantages of high selectivity, easy preparation, and convenient preservation of aptamers, research on glycated hemoglobin detection utilizing aptasensors has received much attention in recent years. However, factors such as the pH and the salt concentration of the solution and the structure of the aptamer could influence the interactions between HbA1c and the aptamer. In this study, the factors were evaluated using surface plasmon resonance (SPR). The results show that the pH and the salt concentration can greatly affect the formation of a complex between the aptamer and HbA1c. In the stereostructure of the aptamer, loop L1 may be an important motif for recognizing glycated hemoglobin. In addition, the best condition for detecting HbA1c was at pH 6, with a high sensitivity and a low limit of detection(LOD) (1.06 × 10−3 RU nM /2.55 nM). The results also demonstrated that the use of an SPR aptamer biosensor can be a sensitive technique to improve the accuracy and correctness of HbA1c measurement. Highly sensitive HbA1c detection using SPR aptasensor is achieved under the circumstance of optimized environmental parameters and aptamer structure evaluation. Image 1 • This is the first investigation of the interaction between aptamer and HbA1c. • This spontaneous interaction can be attributed to enthalpy-entropy compensation. • This methodology could provide serve as an aptamer assay for target binding ability. [ABSTRACT FROM AUTHOR]