Search

Diabetes arises from secretory defects in vascularized micro-organs known as the islets of Langerhans. Recent studies indicated that furthering our understanding of the paracrine effect of somatostatin on glucose-induced insulin secretion could represent a novel therapeutic avenue for diabetes. While many research groups are interested in insulin and glucagon secretion, few are particularly focused on studying the paracrine interaction in islets' cells, and none on monitoring a secretory fingerprint that contemplates more than two hormones. Surface plasmon resonance imaging can achieve high-throughput and multiplexed biomolecule quantification, making it an ideal candidate for detection of multiple islet's secretion products if arrays of hormones can be properly implemented on the sensing surface. In this study, we introduced a multiplex surface plasmon resonance imaging-based biosensor for simultaneous quantification of insulin, glucagon, and somatostatin. Performing this multiplex biosensing of hormones was mainly the result of the design of an antifouling sensing surface comprised by a mixed self-assembly monolayer of CH 3 O-PEG-SH and 16-mercaptohexadecanoic acid, which allowed it to operate in a complex matrix such as an islet secretome. The limit of detection in multiplex mode was 1 nM for insulin, 4 nM for glucagon, and 246 nM for somatostatin with a total analysis time of 21 min per point, making our approach the first reporting a label-free and multiplex measurement of such a combination of human hormones. This biosensor holds the promise of providing us with a mean for the further understanding of the paracrine effect of somatostatin on glucose-induced insulin secretion and consequently help develop novel therapeutic agents for diabetes.

Due to its well-characterized and highly conserved structure, as well as its relative abundance in metabolically active cells, bacterial 16S rRNA sequence plays an important role in microbial identification. In this work, a biosensing strategy has been developed for simultaneous detection of 16S rRNA analytes of three pathogenic bacterial strains: Legionella pneumophila, Pseudomonas aeruginosa, and Salmonella typhimurium. Surface plasmon resonance imaging (SPRi) was used as a detection technique coupled with DNA probe sandwich assemblies and gold nanoparticles (GNPs) for signal amplification. The targets 16S rRNA were selectively captured at the interface of the biosensor by surface-bound DNA probes through a hybridization process. GNP-grafted DNA detection probes were then introduced and were hybridized with a defined 16S rRNA region on the long DNA-RNA sandwich assemblies, resulting in a significant increase of the SPR signal. The results demonstrated the successful implementation of this strategy for detecting 16S rRNA sequences in total RNA mixed samples extracted from the three pathogenic strains at a concentration down to 10 pg mL -1 with a large dynamic range of 0.01-100 ng mL -1 and high selectivity. Since no particular optimization of the probe design was applied, this method should be relatively easy to adapt for quantification of a wide range of bacteria in various liquids.

Bacterial biofilms are a leading cause of infection in health-care settings. Surface plasmon resonance (SPR) biosensors stand as valuable tools not only for the detection of biological entities and the characterisation of biomaterials but also as a suitable means to monitor bacterial film formation. This article reports on a proof-of-concept study for the use of an angular-based SPR biosensor for the monitoring of bacterial cell growth and biofilm formation and removal under the effect of different cleaning agents. The benefit of this custom-made SPR instrument is that it records simultaneously both the critical and resonant angles. This provides unique information on the growth of bacterial cells which is otherwise not obtainable with commonly used intensity-based SPR systems. The results clearly showed that a multilayer biofilm can be formed in 48 hours and the steps involved can be monitored in real-time with the SPR instrument through the measurement of the refractive index change and following the evolution in the shape of the SPR curve. The number, the depth and the sharpness of the reflection ripples varied as the film became thicker. Simulation results confirmed that the number of layers of bacteria affected the number of ripples at the critical angle. Real-time monitoring of the film breakdown with three cleaning agents indicated that bleach solution at 4.5% was the most effective in disrupting the biofilm from the gold sensor. Our overall findings suggest that the SPR biosensor with angular modulation presented in this article can perform real-time monitoring of biofilm formation and has the potential to be used as a platform to test the efficiency of disinfectants.

Legionellosis is a very devastating disease worldwide mainly due to unpredictable outbreaks in man-made water systems. Developing a highly specific and sensitive rapid detection system that detects only metabolically active bacteria is a main priority for water quality assessment. We previously developed a versatile technique for sensitive and specific detection of synthetic RNA. In the present work, we further investigated the performance of the developed biosensor for detection of Legionella pneumophila in complex environmental samples, particularly those containing protozoa. The specificity and sensitivity of the detection system were verified using total RNA extracted from L. pneumophila in spiked water co-cultured with amoebae. We demonstrated that the expression level of ribosomal RNA (rRNA) is extremely dependent on the environmental conditions. The presence of amoebae with L. pneumophila, especially in nutrition-deprived samples, increased the amount of L. pneumophila 15-fold after 1 week as measured through the expression of 16s rRNA. Using the developed surface plasmon resonance imaging (SPRi) detection method, we were also able to successfully detect L. pneumophila within 3 h, both in the presence and absence of amoebae in the complex environmental samples obtained from a cooling water tower. These findings suggest that the developed biosensing system is a viable method for rapid, real-time and effective detection not only for L. pneumophila in environmental samples but also to assess the risk associated with the use of water contaminated with other pathogens.

A highly efficient surface plasmon resonance (SPR) immunosensor is described using a functionalized single graphene layer on a thin gold film. The aim of this approach was two-fold: first, to amplify the SPR signal by growing graphene through chemical vapor deposition and, second, to control the immobilization of biotinylated cholera toxin antigen on copper coordinated nitrilotriacetic acid (NTA) using graphene as an ultrathin layer. The NTA groups were attached to graphene via pyrene derivatives implying π-π interactions. With this setup, an immunosensor for the specific antibody anticholera toxin with a detection limit of 4 pg mL(-1) was obtained. In parallel, NTA polypyrrole films of different thicknesses were electrogenerated on the gold sensing platform where the optimal electropolymerization conditions were determined. For this optimized polypyrrole-NTA setup, the simple presence of a graphene layer between the gold and polymer film led to a significant increase of the SPR signal.

Optical characterisation of liquids through the measurement of their complex refractive index is critical in environmental monitoring, food industry and medicine. While surface plasmon resonance is widely used for measurement of the real part of the refractive index there have been few studies to date on measurement of complex refractive index with this method. We present a systematic study which highlights the challenges associated with this approach. Instrument design and data analysis techniques are presented together with preliminary experimental results.

Surface plasmon resonance (SPR) sensing is one of the most widely used methods to implement biosensing due to its sensitivity and capacity for label-free detection. Whilst most commercial SPR sensors operate in the angular regime, it has recently been shown that an increase in sensitivity and a greater robustness against noise can be achieved by measuring the reflectivity when varying both the angle and wavelength simultaneously, in a so-called spectro-angular SPR biosensor. A single value decomposition method is used to project the two-dimensional spectro-angular reflection signal onto a basis set and allow the image obtained from an unknown refractive index sample to be compared very accurately with a pre-calculated reference set. Herein we demonstrate that a previously reported system operated in the near infra-red has a lower detection limit when operating in the visible spectrum due to the improved spatial resolution and numerical precision of the image sensor. The SPR biosensor presented here has an experimental detection limit of 9.8 × 10(-7) refractive index unit. To validate the system as a biosensor, we also performed the detection of synthetic RNA from pathogenic Legionella pneumophila with the developed biosensing platform.

Legionellosis has been and continues to be a life-threatening disease worldwide, even in developed countries. Given the severity and unpredictability of Legionellosis outbreaks, developing a rapid, highly specific, and sensitive detection method is thus of great pertinence. In this paper, we demonstrate that sub-femtomole levels of 16s rRNA from pathogenic Legionella pneumophila can be timely and effectively detected using an appropriate designed capture, detector probes, and a QD SPRi signal amplification strategy. To achieve specific and sensitive detection, optimal hybridization conditions and parameters were implemented. Among these parameters, fragmentation of the 16s rRNA and further signal amplification by QDs were found to be the main parameters contributing to signal enhancement. The appropriate design of the detector probes also increased the sensitivity of the detection system, mainly due to secondary structure of 16s rRNA. The use of 16s rRNA from L. pneumophila allowed for the detection of metabolically active pathogens with high sensitivity. Detection of 16s rRNA in solutions as diluted as 1 pM at 450 μL (0.45 femtomole) was achieved in less than 3h, making our approach suitable for the direct, timely, and effective detection of L. pneumophila within man-made water systems., (Copyright © 2013 Elsevier B.V. All rights reserved.)

This paper reports on the sensitive, selective, and simultaneous detection of four protein biomarkers involved in metastasis of various cancers, namely Fas, angiopoietin-2 (Ang-2), human epidermal growth factor receptor 2 (HER2), and matrix metallopeptidase-9 (MMP-9) using an antibody-conjugated quantum dot (QD) chip and surface plasmon resonance imaging (SPRi) biosensors. Initially, a self-assembled monolayer film of l-cysteine, using glutaraldehyde as a linker and QDs as signal enhancement moieties, was employed to immobilize anti-Fas for the detection of Fas as a model protein in buffer. The biointerface was characterized using confocal microscopy, atomic force microscopy, and scanning electron microscopy to provide evidence of uniform surface coverage by the QDs. The SPRi signal was enhanced 100-fold to achieve a detection limit of 25 pg mL(-1) after applying biotinylated detection antibody-conjugate streptavidin-modified QDs. Secondly, this signal amplification strategy was applied to sequentially detect Fas, HER2, MMP-9, and Ang-2 at low concentrations on a protein-microprinted/gold-coated SPRi chip. The results showed the absence of cross-reactivity among these proteins and the feasibility of the approach for multiplex detection of biomarkers as required for the accurate diagnosis of various diseases.

The surface plasmon resonance imaging chip biointerface is fully designed using near-infrared (NIR) quantum dots (QDs) for the enhancement of surface plasmon resonance imaging (SPRi) signals in order to extend their application for medical diagnostics. The measured SPRi detection signal following the QD binding to the surface was amplified 25-fold for a 1 nM concentration of single-stranded DNA (ssDNA) and 50-fold for a 1 μg/mL concentration of prostate-specific antigen (PSA), a cancer biomarker, thus substantiating their wide potential to study interactions of a diverse set of small biomolecules. This significant enhancement is attributed to the QD's mass-loading effect and spontaneous emission coupling with propagating surface plasmons, which allowed the SPRi limit of detection to be reduced to 100 fM and 100 pg/mL for ssDNA and PSA, respectively. Furthermore, this study illustrates the potential of SPRi to be easily integrated with fluorescent imaging for advanced correlative surface-interaction analysis.

The advances in genomics and proteomics have unveiled an exhaustive catalogue of biomarkers that can potentially be used as diagnostic and prognostic indicators of genetic and infectious diseases. Current thrust in biosensor development is towards rapid, real-time, label-free and highly sensitive detection of the indicative biomarkers. While surface plasmon resonance imaging (SPRi) biosensors could potentially be the best suited candidate for biomarker-based diagnosis, important milestones need to be reached. Commercially available SPRi instrumentation is currently limited by the flow-cell technology to serial-sample processing and has limited sensitivity for the detection of markers present at low concentration. In this paper, we have implemented an approach to enhance sample handling and increase the sensitivity of the SPRi detection technique. We have developed a digital microfluidic platform with an integrated nanostructured biosensor interface that allows for rapid, ultra-low volume, sensitive, and automated on-chip SPRi detection of DNA hybridization reactions. Through the exploitation of electromagnetic properties of nanofabricated periodic gold nanoposts, SPRi signal was increased by 200% with the estimated limit of detection of 500 pM (90 attomoles). Using the versatile fluidic manipulation provided by the digital microfluidics, rapid and parallel target identification was achieved on multiple array elements within 1 min using 180 nL sample volume. By delivering multiple target analytes in individually addressable low volume droplets, without external pumps and fluidic interconnects, the overall assay time, cost and complexity was reduced. The proposed platform allows extreme versatility in the manipulation of precious low volume samples which makes this technology very suitable for diagnostic applications., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Periodic nanostructures fabricated by Nanoimprint Litography (NIL) in low-cost plastic substrates and coated with thin gold film were explored for enhanced surface plasmon resonance imaging (SPRi) detection. Rigorous coupled-wave analysis was used to model the SPRi response of these nanostructured surfaces. Two-dimensional nanogratings and nanogrooves were fabricated on Zeonor 1060R(TM) by NIL and followed by metal deposition. The detection of refractive index changes in the dielectric layer due to bulk medium change, DNA immobilization and DNA hybridization events were monitored using SPRi to assess the corresponding signal amplification. The results indicate target-dependent sensitivity enhancement which is maximized for the detection of biomolecular binding events. The 500 nm period nanogrooves provided a 4 times SPR signal amplification compared to the conventional uniform gold film on SF-11 glass for DNA hybridization detection. Our work demonstrates that the use of nanoimprinted plastic substrates provides a low-cost solution for the SPR-based detection with sensitivity that meets the requirements in practical diagnostic applications.

In this report, nano-gratings with guided adsorption of biomolecules are investigated as new transducer elements or biointerfaces for surface plasmon resonance biosensor technologies. SPR biosensors are of particular interest due to the interaction between the electromagnetic fields and periodic nano-structures. In this article, sensitivity enhancement is demonstrated for a surface plasmon resonance interface, in a Kretschmann's configuration, featuring nano-gratings combined with nano-patterned immobilization of surface bioreceptors. The fabrication of this enhanced biointerface is demonstrated using a combination of metal lift-off and self-assembled monolayers. Rigorous coupled-wave analyses point to an increase in SPR angular response for the immobilization of surface bioreceptors onto areas of the nano-corrugated surface exhibiting high electromagnetic field intensity. Experimental measurements of the immobilization of anti-TNF-alpha antibody as a model bioreceptor using an imaging-SPR technique show a 3 times increase in angular resonance response from nano-grating surfaces with functionalized mesas compared to a planar surface or to a uniformly functionalized nano-grating surface. Furthermore, results also show an increased detection of TNF-alpha due to the increased accessibility to the adsorbed bioreceptors on the nano-gratings.

This work reports on a dynamically configurable micro-array surface plasmon resonance biochip platform. The platform comprises a digital electrowetting-on-dielectric (EWOD) microfluidic device tailored to surface plasmon resonance imaging (SPRi). We demonstrate its application for simultaneous immobilization of different DNA probes at the designated detection sites on-chip from sub-microL volume solutions in combination with multichannel label-free real-time detection of subsequent hybridization reactions. Successful on-chip DNA probe dilution and immobilization is also demonstrated using SPRi hybridization detection. Furthermore, active control of the immobilized probe density and orientation is achieved under an applied potential using the electric interface of the EWOD device. For low probe densities, under negative applied potential, the DNA hybridization efficiency is enhanced compared to passive probe immobilization, yielding a two-fold SPR signal increase within only 8min of hybridization. EWOD microfluidic platform coupled with SPRi promises to dramatically increase the speed of detection and quantification of biomolecular interactions while reducing reagent consumption. The proposed system would enable the development of high-throughput, rapid and ultrasensitive detection of biomolecules beyond DNA microarray applications.

This article presents a multichannel droplet-based surface plasmon resonance platform. The platform comprises a digital electrowetting-on-dielectric (EWOD) microfluidic device coupled to surface plasmon resonance imaging (SPRi). SPRi is now a well-established detection technique that enables in-situ monitoring of multiple reactions occurring at the surface of the chip without the use of labels. Currently, the limiting factor in the application of SPRi for high-throughput applications is the flow-cell technology which relies on sequential sample processing within the continuous fluid flow. An original solution compared to the continuous flow-cell technology is proposed to increase the capability of existing SPRi technology. A parallel SPRi detection of different samples on the surface is achieved using the array-based digital microfluidic device.

We explore periodic gold nanoposts as substrates for the enhanced surface plasmon resonance imaging (SPRi) detection of DNA hybridization. Rigorous coupled-wave analysis was used to model and design the nanopost-based SPRi biosensor. Arrayed gold nanoposts on gold-coated glass substrate, with various widths and periodicity, were fabricated using electron-beam lithography and characterized with scanning electron and atomic force microscopy. A scanning-angle SPRi apparatus was used to conduct the kinetic analysis of DNA hybridization on nanopost-based sensor surface and assess the corresponding SPR signal amplification. Experimental results showed that both the nanostructure size and period influenced the SPR signal enhancement; the optimized 30 nm height, 50 nm size, and 110 nm period nanoposts provided a fivefold SPR signal amplification compared with the plain 50 nm thick gold film used as control.

The use of surface plasmon resonance (SPR) biosensors is increasingly popular in fundamental biological studies, health science research, drug discovery, clinical diagnosis, and environmental and agricultural monitoring. SPR allows for the qualitative and quantitative measurements of biomolecular interactions in real-time without requiring a labeling procedure. Today, the development of SPR is geared toward the design of compact, low-cost, and sensitive biosensors. Rapid advances in micro-fabrication technology have made available integratable opto-electronic components suitable for SPR. This review paper focuses on the progress made over the past 4 years toward this integration. Readers will find the descriptions of novel SPR optical approaches and materials. Nano-technology is also increasingly used in the design of biologically optimized and optically enhanced surfaces for SPR. Much of this work is leading to the integration of sensitive SPR to lab-on-a-chip platforms.