Search

Simple Summary: The feeding and nutrition of Hermetia illucens becomes an important issue due to its ability to convert organic by-products obtained from agri-food chains into extremely valuable biomass. In this context, coffee silverskin, a by-product of coffee roasting, enriched with 5%, 10%, 20%, and 25% of microalgae (Schizochytrium limacinum and Isochrysis galbana), was investigated as a basal rearing substrate for H. illucens. The study also analyzed the evaluation of the environmental sustainability of diets. The results showed that the inclusion of microalgae in the diets led to an increase in larval growth performance, especially in larvae fed with S. limacinum. Conversely, the higher the proportion of microalgae, the greater the environmental impact of larval production. Therefore, considering that the 10% S. limacinum inclusion achieved the best waste reduction index and showed only minor differences compared to the higher inclusions of this microalgae, it can be considered a compromise between the nutritional properties of the insects and sustainability. Moreover, considering that the rearing substrate enriched with 10% S. limacinum achieved the best waste reduction index and showed only minor differences in terms of nutritional value of H. illucens prepupae compared to the higher inclusions of this microalgae, it can be considered a compromise for sustainable insect production. Hermetia illucens is a promising insect due to its ability to convert low-value substrates as food chain by-products into highly nutritious feed. Its feeding and nutrition are important issues. The aim of this work was to investigate the effect of different substrates consisting of coffee silverskin, a by-product of the roasting process, enriched with different inclusions of microalgae (5%, 10%, 20%, and 25%), Schizochytrium limacinum, and Isochrysis galbana, combined with the assessment of environmental sustainability by LCA. In general, the addition of microalgae led to an increase in larval growth performance due to the higher content of protein and lipids, although S. limacinum showed the best results with respect to larvae fed with coffee silverskin enriched with I. galbana. A higher prepupal weight was observed in larvae fed with 10%, 20%, and 25% S. limacinum; shorter development times in larvae fed with 25% of both S. limacinum and I. galbana; and a higher growth rate in larvae fed with 25% S. limacinum. The 10% S. limacinum inclusion was only slightly different from the higher inclusions. Furthermore, 10% of S. limacinum achieved the best waste reduction index. The greater the inclusion of microalgae, the greater the environmental impact of larval production. Therefore, the addition of 10% S. limacinum appears to be the best compromise for larval rearing, especially considering that a higher inclusion of microalgae did not yield additional benefits in terms of the nutritional value of H. illucens prepupae. [ABSTRACT FROM AUTHOR]

Increasing legume intake through dietary diversification confers nutritional and environmental benefits. This study used life cycle assessment to evaluate the environmental impacts of producing frozen green peas from conventional and organic farming. We explored two ways of treating farm data: modeling each farm (baseline) and using a uniform distribution of each farm parameter's average, maximum, and minimum values (alternative). We also assessed the indirect land-use change (iLUC) impacts by applying a deterministic model and used the EF 3.0 method to estimate the midpoint environmental impacts. The results of the two scenarios for pea cultivation (including iLUC) showed notable differences in absolute terms with minor discrepancies in the contribution analysis (e.g., climate change (CC) for the baseline and alternative were 0.98 and 2.09 kg CO2 eq./kg fresh peas, respectively). Generally, conventional peas had a higher environmental impact than organic peas, although this was not uniformly observed across all farms. When included, iLUC accounted for nearly half of the CC score. Pea cultivation was the most impactful phase due to emissions from fertilizers and field operations. The impacts of pea production can be reduced by anaerobic digestion of pea residues with energy and nutrient recycling. However, improvements in processing and nitrogen use efficiency could significantly enhance the overall environmental performance of frozen green peas. In summary, this study emphasizes the need for sustainable practices to minimize the environmental impact of frozen pea production. [ABSTRACT FROM AUTHOR]

Purpose: In the agro-food industry, related to the horticultural sector, promising products are the ones called “ready to eat”, “ready to use”. Fresh processed vegetables, belonging to the “fresh cut” products, are considered barely treated and potentially more sustainable than frozen ones. The principal aim of this study is assessing the environmental impact of nursery step for seedlings production, commonly included in the vegetable chain production in Italy and other countries. Four different kinds of salad have been assessed: Cichorium endivia var. crispum (curly endive), Cicorium endivia var. latifolium (escarole), Cichorium intybus var. foliosum (red chicory) and Cichorium intybus var. foliosum (sugarloaf chicory).Methods: The study was conducted following ISO standards on life cycle assessment (14,040, 14,044) with a “cradle to nursery gate” approach. The functional unit (FU) selected was one small plant in polystyrene tray (170 holes); this choice is due to a requirement of repeatability and comparability of the analysis outcomes. Data for inventory analysis have been detected throughout surveys, questionnaires and direct measurements. In more details, materials used for structures, energy and mass flows have been considered. Calculation method selected is the CML 2 baseline 2000 v. 2.05 with the related impact categories.Results and discussion: Results show that the four species have a comparable environmental load. Differences among the different impact categories are lower than the 30% excluding eutrophication for escarole (−56%) with respect to sugarloaf chicory. Specie that presents the lowest impact is Escarole. This is due to the shorter cultivation cycle. Thermoplastic and plastic materials and their production, substrates extraction and direct emissions from fertilizers and pesticides are the main contributors affecting the environmental sustainability of seedlings production.Conclusions: Consistently with other studies on similar research topic, energy consumption, such as electricity, gives a load of little relevance. Taking into account only the category of global warming, the absolute average load of one seedling produced is 2.53e-3 kg CO2 eq. Further studies regarding the evaluation of alternative production system with a lower use of plastics and thermoplastics will be useful. [ABSTRACT FROM AUTHOR]

The aim of this work is to evaluate the sustainability, in terms of greenhouse gases emission saving, of a new potential bio-ethanol production chain in comparison with the most common ones. The innovation consists of producing bio-ethanol from different types of no-food grapes, while usually bio-ethanol is obtained from matrices taken away from crop for food destination: sugar cane, corn, wheat, sugar beet. In the past, breeding programs were conducted with the aim of improving grapevine characteristics, a large number of hybrid vine varieties were produced and are nowadays present in the Viticulture Research Centre (CRA-VIT) Germplasm Collection. Some of them are potentially interesting for bio-energy production because of their high production of sugar, good resistance to diseases, and ability to grow in marginal lands. Life cycle assessment (LCA) of grape ethanol energy chain was performed following two different methods: i) using the spreadsheet BioGrace, developed within the Intelligent Energy Europe program to support and to ease the Renewable Energy Directive 2009/28/EC implementation; ii) using a dedicated LCA software. Emissions were expressed in CO2 equivalent (CO2eq). These two tools gave very similar results. The overall emissions impact of ethanol production from grapes on average is about 33 g CO2eq MJ-1 of ethanol if prunings are used for steam production and 53 g CO2eq MJ-1 of ethanol if methane is used. The comparison with other bio-energy chains points out that the production of ethanol using grapes represents an intermediate situation in terms of general emissions among the different production chains. The results showed that the sustainability limits provided by the normative are respected to this day. On the contrary, from 2017 this production will be sustainable only if the transformation processes will be performed using renewable sources of energy. [ABSTRACT FROM AUTHOR]

The use of renewable energies as alternative to fossil fuels has value from different points of view and has effects at environmental, social and economic level. These aspects are often connected to each other and together define the overall sustainability of bioenergy. At European level, the Directive 2009/28/EC gives the basic criteria for the estimation of sustainability of biofuels and indicates a minimum threshold of 35% of greenhouse gas saving for a biofuel in order to be considered sustainable. The Directive gives the possibility to identify standard regional values for the cultivation steps that could be utilized for the certification. This paper aims to give a contribution to the definition of these values considering the RED methodology applied to the sunflower cropped in central Italy which is characterized by a hilly landscape and not-irrigated crops. To determine input and output of sunflower cultivation in the central Italy, the results of PROBIO project, carried out by the Authors, were used. The sustainability of biodiesel produced from sunflower grown in central Italy is variable and depends on the nitrogen input and seasonal climatic conditions that affect the yields. The greenhouse gases savings of the Italian chain is 40% in average, greater than the required 35% and would be possible to assign this value as standard to the biofuel chain biodiesel from sunflower cultivated in central Italy. Using an averaged regional standard value guards against the possibility of considering unsustainable harvesting in unfavourable years and seeing it overestimated in the favourable ones. [ABSTRACT FROM AUTHOR]

The agricultural sector and its related production chains are good sources of residual biomass. Olive and vineyard pruning residues are present in high quantities in Italy. The limited bulk and energy densities of these biomass materials affect the harvesting and logistic costs, limiting energy and environmental sustainability. Pelletisation is the most efficient process for increasing bulk and energy densities. This study evaluates the pelletisation process of olive and vineyard prunings, pure, or blended with variable quantities of spruce sawdust. A 15 kW pelletisation system was chosen, in line with production at the farm level. The most important quality parameters of the produced agripellets were analyzed. The results of this investigation suggest that blending could valorize other biomass materials less suitable for pelletisation and reach the pellet quality required by Italian technical standards. The addition of pruning residues to spruce sawdust leads to an improvement in durability. Spruce sawdust pellets have a durability value of 78.4%. Adding 20% of olive prunings (S80O20) increases this value to 92.2, while adding 20% vineyard prunings (S80V20) increases this value up to 90.3. The addition of 20% of pruning residues significantly increased the length and decreased fines. [ABSTRACT FROM AUTHOR]

Phasing out fossil fuels to renewables is currently a global priority due to the climate change threat. Advocacy for biomass use as an energy source requires assessing the quality biomass and ecological impacts of bioenergy supply chains. This study evaluated the quality of biomass residues from orchards and silviculture transported from different Northern and Central Italy locations and the carbon footprint of a biomass power plant. The total greenhouse emissions were calculated based on primary data for 2017 according to the ISO/TS 14067. All the residue samples showed their suitability for biofuel use. Ash content was relatively low on average (3–5% d.m.), except for grapevine residues (18% d.m.). The lower heating value was within the expected range of 15–21 MJ kg−1 for plant species. The average GHG emission from the power plant was 17.4 g CO2 eq./MJ of electrical energy, with the energy conversion (38%) and transportation of biomass (34%) phases being the main impact contributors. For this study, impacts of residual agricultural residue were about half that of residues from forest management, mainly due to chipping and greater transport distance. Results show that sourcing residual biomass materials for electricity generation close to power plants significantly reduce GHG emissions compared to conventional fossil fuels. [ABSTRACT FROM AUTHOR]

Environmental sustainability continues to attract global interest, especially due to the issue of climate change. The agri-food sector is considered a major contributor to climate change as processes and activities within the sector can negatively impact the environment. The recent changing dietary pattern towards increased vegetable consumption implies a consequent increase in production to meet demand. This study assessed the environmental performance of 1 kg of spinach/FU (Functional Unit) cultivated by different producers in Italy under integrated and organic farming systems. The life cycle assessment was used following the CML_IA impact assessment method. The data used was mainly primary, related to 2019/2020 (harvest period), and representative of the cultivation systems of central and southern Italy. From the results obtained, impact scores for central Italy were higher (e.g., for global warming 0.56 and 0.47 kg CO2 eq. for central and southern respectively). There was high variability among the scores obtained. However, no statistically significant differences were observed at a confidence level of 95% (p < 0.05). Integrated farming was also more impacting than organic for most categories (e.g., for global warming 0.20 kg CO2 eq. for integrated and 0.075 kg CO2 eq. for organic) in Cerignola, Puglia region. Emissions from fertilizer, pesticide, tillage, and combine harvesting were major contributors to impact shares. The results of this study will be helpful to ensure sustainable spinach production and consumption. [ABSTRACT FROM AUTHOR]

Ghana is an important cocoa producer and exporter and this production is of high economic importance. Increasing interest in the sustainable productions of cocoa/chocolate necessitated the need to assess the environmental impacts associated with the production of different chocolate variants (extra dark (EDC), dark (DC), milk (MC) and flavoured milk (FMC) in Ghana, including the identification of environmental hotspots for improvement. The life cycle assessment tool was used following the CML_IA and CED impact assessment methods. EDC had the lowest scores for most of the impact categories while FMC was most impactful. For Global Warming Potential (GWP), EDC and FMC were estimated to be 1.61 kg CO2 eq. and 4.21 kg CO2 eq., respectively. CED ranged from 1.44 × 102 to 1.50 × 102 MJ-eq. Chocolate manufacturing phase was generally more impactful than cocoa cultivation due to high emissions from milk and sugar production. The impact scores for 100 g packaged chocolate bar were the lowest in comparison to 300 g chocolate pouches and 12.5 g packaged chocolate strips. GWP for 100 g and 12.5 g were 0.20 kg CO2 eq. and 0.39 kg CO2 eq., respectively. Comparing different destination points for the manufactured chocolate, impact scores for the international destination were similar to those recorded for local destinations. Improvement options are suggested for all phases to ensure more sustainable chocolate production and distribution. [ABSTRACT FROM AUTHOR]

Agricultural activities in Europe cover half of the total area of the continent and are simultaneously a cause of environmental impact and victims of the same impact. Horticultural or fruit crops are considered highly intensive and often employ many crop inputs such as fertilizers, pesticides, and various materials. Strawberry falls into this group, and it has grown in acreage and production more than others globally. The aim of this study is to compare the environmental impact of two strawberry cultivation systems in central Italy, a mulched soil tunnel and a soilless tunnel system. The method used to assess the impact is LCA, widely applied in agriculture and supported by international standards. The data used are mainly primary, related to 2018, and representative of the cultivation systems of central Italy. For impact assessment, the method selected was the CML_IA baseline version. From the results obtained, the two systems show a similar impact per kg of strawberries produced (e.g., for global warming: 0.785 kg CO2 eq for soilless, 0.778 kg CO2 eq for mulched soil tunnel). Reduced differences can be observed for the use of crop inputs (greater for the tunnel) and the use of materials and technology (greater for soilless). The mitigation measures considered concern the replacement of the packaging (excluding plastic) and the growing medium of the soilless using perlite and compost from insect breeding. [ABSTRACT FROM AUTHOR]

The impact of heat production from vineyard pruning pellets has been evaluated in this paper. The study considers two different systems: the first one based on a mobile pelletizer (PS1) and the second one based on a stationary pellet plant (PS2). The analysis conducted is from "cradle to grave"; the systems under analysis includes pruning harvesting, transport to storage area, pelletization (mobile system or stationary production plant), transport to consumer and combustion. The functional unit selected is 1 MJ of thermal energy produced. The impact assessment calculation methods selected are Eco-Indicator 99 (H) LCA Food V2.103/Europe EI 99 H/A with a midpoint and endpoint approach, and ReCiPe Midpoint (H) V1.10. Considering Life Cycle Assessment results, Eco-indicator shows a total impact of 4.25 and 4.07 mPt for mobile pelletizer and stationary pellet plant, respectively. Considering the three damage categories, PS1 has values of 2.4% (Human Health), 3.8% (Ecosystem Quality) and 17.3% (Resources), more impactful than PS2. Contribution analysis shows that direct emissions are the major damage contributor, followed by wood ash management. From a comparison between the baseline scenario and a scenario with an avoided product (wood ash as a standard potassium fertilizer), PS1 and PS2 with an avoided product approach are 41% and 40% less impactful than in the baseline scenarios. When testing the impact of mobile pelletizer while considering transportation as a factor, a reduction of distance for pellet has been evaluated. Reducing the distance from 100 to 10 km, the total impact of PS1 almost reaches the impact of PS2 with a difference of around 4.6% (Eco-indicator 99 method). The most impactful processes are pellet production, direct emissions and ash management, while a less impactful factor is the electricity consumption. Transportation shows the lowest impact. Considering the ReCiPe impact calculation method with a midpoint approach, the results confirm what was found with Eco-indicator 99; the PS1 shows a slightly higher impact than PS2. [ABSTRACT FROM AUTHOR]

Sunflower is one of the most important oilseed crops cultivated in the world for different purposes. In Italy, the production is mostly located in the central area, representing 70% of Italian production. The market demand for sunflower oil is higher than the national production. There is an increasing request for cold pressed sunflower oil for food application. The success of this activity is linked to a correct setting up and management of the production and supply chain with a valorization of products and by-products. To this aim, information is needed, and this paper is focused on the cultivation of sunflower in central Italy using suitable hybrids, as well as on the study of the cold extraction performance of the sunflower seed produced and the quality of by-products and residues. Results indicate that, on average, a range of about 1.0–1.5 t ha−1 of cold pressed oil and different amounts of by-products can be obtained. According to a proposed scenario, 30 ha cultivated with sunflower are needed to create a complete supply chain within the farm, avoiding many additional passages and maintaining all the value for the farmer. It is important to use suitable hybrids for obtaining good yield, but also the cold extraction performances are important because they also affect the quality of by-products and residues that can be valorized themselves to improve sustainability. [ABSTRACT FROM AUTHOR]