Search

Objective: The objective of this study is to assess and compare the clinical efficacy of "Figure-8" banding and double-row anchor suture-bridge fixation techniques in the arthroscopic management of tibial intercondylar eminence avulsion fractures., Method: A retrospective analysis was conducted on the medical records of 42 patients who underwent arthroscopic surgery for tibial intercondylar eminence fractures at our institution from June 2017 to June 2022. This cohort included 20 cases treated with "Figure-8" banding and 22 cases managed using double-row anchor suture-bridge fixation. Comparative assessments were made regarding operative duration, duration of fracture consolidation, postoperative knee joint range of motion, joint stability as assessed by the Lachman test, Lysholm score, and International Knee Documentation Committee (IKDC) functional score for both treatment groups., Results: The mean follow-up duration was 13.8 months. The analysis indicated that the double-row anchor suture-bridge group had a significantly longer operative duration compared to the "Figure-8" banding group (p < 0.05). Postoperative computed tomography (CT) scans confirmed successful reduction in both groups, with fracture consolidation achieved within an average of three months. Both groups showed significant improvements in postoperative knee range of motion, joint stability, and functional scores compared to preoperative measurements (p < 0.05). During the initial two-month post-surgery, the double-row anchor suture-bridge group demonstrated superior knee joint range of motion and functional scores compared to the "Figure-8" banding group (p < 0.05); however, these differences were not statistically significant beyond three months post-surgery (p > 0.05). By the one-year postoperative mark, joint stability outcomes were comparable between the two treatment groups (p > 0.05)., Conclusion: Both "Figure-8" banding and double-row anchor suture-bridge fixation techniques in the arthroscopic management of tibial intercondylar eminence avulsion fractures can achieve precise reduction and stable fixation. In addition, the figure-8 suture group has the characteristics of shorter surgery time and less cost. Notably, early postoperative knee function appears to be superior with double-row anchor suture-bridge fixation compared to "Figure-8" banding., (© 2024. The Author(s).)

Purpose: This study aimed to evaluate the clinical and radiological outcomes of modified suture-bridge technique fixation for anterior cruciate ligament (ACL) tibial avulsion fracture., Method: Minors who underwent arthroscopic reduction and modified suture bridge fixation of ACL tibial avulsion fracture between January 2018 and January 2022 were retrospectively analyzed. Postoperative MRI and X-ray examinations were performed to evaluate the presence of epiphyseal plate injury and fracture healing. Moreover, KT-1000 side-to-side difference, Lachman test, range of motion (ROM), the subjective Knee score of the International Knee Documentation Committee (IKDC), Lysholm Knee score, and Tegner activity grade score were evaluated preoperatively and at the minimum 1-year follow-up visit., Results: A total of 16 participants met the inclusion criteria. They had a mean age of 12.6 years (range, 9-16 years); mean time to surgery, 6.9 days (range, 2-13 days) and had a minimum of 12 months clinical follow-up (mean, 25.4 months; range, 12-36 months) after surgery. Postoperative radiographs and MRI showed no injury to the epiphyseal plate, optimal reduction immediately after the operation, and bone union within three months in all patients. All of the following showed significant improvements (pre- vs. postoperatively): mean KT-1000 side-to-side difference (8.6 vs. 1.5; p < 0.05), Lachman tests (2 grade 9 and 3 grade 7 vs. 0 grade 12 and 1 grade 4; p < 0.05), IKDC subjective score (48.3 vs. 95.0; p < 0.05), mean Lysholm score (53.9 vs. 92.2; p < 0.05), mean Tegner activity score (3.2 vs. 8.3; p < 0.05) and mean ROM (42.9°vs 133.1°; p < 0.05)., Conclusion: Arthroscopic reduction and modified suture bridge fixation for ACL tibial avulsion fracture is a dependable and recommended treatment that can effectively restore the stability and function of the knee and is worthy of clinical promotion., (© 2024. The Author(s).)

Introduction: Anterior cruciate ligament (ACL) tibial avulsion fracture is a rare injury, which usually happens in adults with traffic accidents or sports injuries. Surgery interventions are common treatment methods, they can restore knee function and help to return to normal life. In this study, we described an arthroscopic modified suture bridge fixation technique for ACL tibial avulsion fractures and explored the feasibility and therapeutic effects., Materials and Methods: This retrospective study reviewed data from January 2020 to May 2022. Data were collected on 18 patients (10 males and 8 females) with ACL tibial avulsion fractures and underwent arthroscopic modified suture bridge fixation technique. The study analyzed surgical data about intraoperative blood loss, operation time, hospital stay, fracture healing time, and visual analog scale (VAS). Functional evaluation of the knee joint was performed using the anterior drawer test, Lysholm knee scoring scale, International Knee Documentation Committee (IKDC), and knee range of motion (ROM)., Results: All 18 patients were followed up between 12 and 20 months, with an average of 15.22 ± 1.96 months. The intraoperative blood loss was approximately 15-40 mL, averaging 25.78 ± 6.19 mL. The operation time was 65-85 min, with a mean of 74.89 ± 4.86 min. The hospital stay of patients was 3-5 days, with a mean of 3.89 ± 0.76 days. The mean fracture healing time was 8-12 weeks after surgery, with a mean of 9.22 ± 1.7 weeks. All incisions healed grade I without infection. There were no internal fixation failures, neurovascular injuries, and lower extremity deep venous thrombosis. The anterior drawer test was negative in all patients. At the final follow-up, the mean VAS score was 0-3, averaging 1.56 ± 0.71. The Lysholm score of the injured knee was 89-96, with an average of 92.50 ± 2.50; the IKDC score was 88-93, with an average of 90.44 ± 1.89; the knee ROM was 110-126°, with an average of 120.67° ± 4.31°., Conclusion: Results demonstrated that the modified suture bridge fixation technique under arthroscope could provide reliable fixation and favorable clinical effects for ACL tibial avulsion fractures. This is a simple, minimally invasive, effective, and clinically applicable surgical method for ACL tibial avulsion fracture., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objective: To assess the clinical results of the "figure-of-eight" suture-button technique in the arthroscopic treatment of anterior cruciate ligament (ACL) tibial avulsion fractures., Methods: This was a retrospective study reviewing data from September 2013 to June 2019. A total of 27 patients (13 males and 14 females) who underwent arthroscopic "figure-of-eight" suture-button fixation for displaced ACL avulsion fractures were analyzed. The mean age of the patients in the sample was 15.8 years (10-29 years), with a mean follow-up of 24 months (6-48 months). According to Meyers-McKeever classification, 11 patients were classified as type III and 16 as type IV. All patients were evaluated following the guidelines of the radiological union, the Lysholm knee scoring scale, and the International Knee Documentation Committee (IKDC)., Results: Fractures were united within 3 months after surgery in all 27 cases. During the last follow-up, all the anterior drawer and Lachman tests were negative, except in 1 patient whose anterior drawer test was 1° positive. The range of motion was improved from 72.22° ± 27.92° before surgery to 137.78° ± 7.38° at the last follow-up (P < 0.05); the Lysholm score was improved from 45.81 ± 10.94 before surgery to 93.04 ± 5.66 at the last follow-up (P < 0.05); and the IKDC score was increased from 43.89 ± 11.16 before surgery to 90.26 ± 5.86 at the last follow-up (P < 0.05). In 1 patient, an inflammatory reaction was observed at the medial incision of the tibial tubercle; the symptoms disappeared with administration of antibiotics for 1 week. All patients returned to their preinjury physical activities at the last follow-up., Conclusion: The "figure-of-eight" suture-button technique achieves a satisfactory clinical outcome and provides an effective method for the treatment of displaced ACL avulsion fractures., (© 2020 The Authors. Orthopaedic Surgery published by Chinese Orthopaedic Association and John Wiley & Sons Australia, Ltd.)

Purpose: Proximal fibula avulsion fractures, or "arcuate fractures", are an often discussed but poorly defined injury pattern which represent a destabilizing injury to the posterolateral corner of the knee. Historical and recent literature discussing reconstruction and repair techniques exist, but there has been little biomechanical evaluation of repair techniques. The purpose of this study was to evaluate the strength of three type of fixation techniques for arcuate fractures: bone tunnels, a screw and washer, and a novel suture anchor technique., Methods: A laboratory model of the arcuate fracture pattern was developed. This was used to create an arcuate fracture in 24 cadaveric specimens. Knees were randomized into fixation with either suture tunnel (ST), screw and washer (SW), or suture anchor (SA) repair. A previously published model for inducing varus stress was applied and a MTS testing system was used to assess fixation ultimate and yield strength., Results: Fibular fracture occurred during the fixation of one specimen from the ST group and one from the SA group. Analysis of the remaining 22 specimens revealed a mean ultimate strength of 2422.48 N for the ST group, 2271.78 for SW, and 3041.66 for SA (p = 0.390). Yield strengths were 2065.28 for ST, 1882.43 for SW, and 2871.92 for SA (p = 0.224). Analyses of stiffness and total energy applied were not statistically different (p = 0.111 and 0.601, respectively)., Conclusion: Biomechanical analysis of three types of arcuate fragment fixation revealed robust fixation among all methods, supporting surgeon preference for fixation. Fixation may depend on the size of bony fragment and whether or not the injury is a bony or soft tissue injury., Competing Interests: Declaration of Competing Interest To the best of our knowledge, no conflict of interest, financial or other exists, related to this work, (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Purpose: Displaced tibial posterior cruciate ligament (PCL) avulsion fractures require surgical fixation in order to provide an adequate bone healing and to avoid a loss of posterior stability. The purpose of this study was to compare the biomechanical properties of a recently established modified suture bridge technique to a well-established transtibial pullout technique. It was hypothesized that the suture bridge technique shows lower elongation and higher load to failure force compared to a transtibial pullout fixation., Methods: Twelve fresh-frozen human cadaveric knees were biomechanically tested using an uniaxial hydrodynamic material testing system. A standardized bony avulsion fracture of the tibial PCL insertion was generated. Two different techniques were used for fixation: (A) suture bridge configuration and (B) transtibial pullout fixation. In 90° of flexion elongation, initial stiffness and failure load were determined., Results: The suture-bridge technique resulted in a significant lower elongation (4.5 ± 2.1 mm) than transtibial pullout technique (12.4 ± 3.0 mm, p < 0.001). The initial stiffness at the beginning of cyclic loading was 46.9 ± 3.9 N/mm in group A und 40.8 ± 9.0 N/mm in group B (p = 0.194). Load to failure testing exhibited 286.8 ± 88.3 N in group A and 234.3 ± 96.8 N in group B (p = 0.377)., Conclusion: The suture bridge technique provides a significant lower construct elongation during cyclic loading. But postoperative rehabilitation must respect the low construct strength of both techniques because both fixation techniques did not show a sufficient fixation strength to allow for a more aggressive rehabilitation.

The purpose of this research is to evaluate the results of arthroscopic suture fixation with fiber wires used as treatment for ACL avulsion fracture, and to determine how effective such a technique is when it comes to restoring of knee function. This prospective study involves 28 patients, who underwent arthroscopic fixation of displaced ACL avulsion fractures at Saint Paul Hospital (Hanoi) from January 2014 to March 2018. The first 3 weeks were not marked with any abnormalities associated with postoperative sutures and hematomas; infectious complications were not detected either. Postoperative displacement of fracture fragments did not take place among the patients involved in the study. At the 3-month follow-up, the average IKDC score was 90.7 (range 76-100), and the average Lysholm score was 93.6 (range 82-100). The percentage of excellent scores was 42.9% (12 patients), good scores accounted for 50% (14 patients), while fair/poor scores accounted for 3.6% each (one patient on each score). The percentage of excellent/good scores was 92.9% in total. This study shows that ACL avulsion fracture can be treated effectively by arthroscopic suture fixation with fiber wires. In fact, this technique may restore knee function and stability.

Background: In cases of avulsion fracture of the ischial tuberosity in which the bone fragments are substantially displaced, nonunion may cause pain in the ischial area. Various surgical procedures have been reported, but achieving sufficient fixation strength is difficult., Case Presentation: We treated a 12-year-old male track-and-field athlete with avulsion fracture of the ischial tuberosity by suture anchor fixation using the suture bridge technique. The boy felt pain in the left gluteal area while running. Radiography showed a left avulsion fracture of the ischial tuberosity with approximately 20-mm displacement. Union was not achieved by conservative non-weight-bearing therapy, and muscle weakness persisted; therefore, surgery was performed. A subgluteal approach was taken via a longitudinal incision in the buttocks, and the avulsed fragment was fixed with five biodegradable suture anchors using the suture bridge technique., Conclusions: Although the majority of avulsion fractures of the ischial tuberosity can be treated conservatively, patients with excessive displacement require surgical treatment. The suture bridge technique provided secure fixation and enabled an early return to sports activities.

Avulsion fracture of the volar base of the distal phalanx is a rare injury. Zone 1 flexor tendon injuries can be treated with either internal or external fixation techniques. Pull-out suture repairs are often used for FDP tendon avulsion injuries. However, the pull out suture technique is associated with a number of well documented complications including nail bed injury and pressure necrosis. Despite the variety of techniques available for the repair of acute distal zone 1 flexor tendon injuries, no one technique has proven to be superior to all others. We address our experience with treatment of FDP avulsion injuries using suture anchor and miniscrew. Our technique supplements the suture anchor technique, which often causes a lack of strength, with an additional miniscrew. We introduce two cases of combined method using both suture anchor and miniscrew for treatment of FDP avulsion injuries.

Anterior cruciate ligament (ACL) avulsion fracture is rare and mostly occur in tibial attachment. Avulsion fracture of femoral attachment of ACL was uncommon and mostly reported in skeletally immature patient. This article aims to report an interesting case of femoral attachment-ACL avulsion fracture in skeletally mature patient with arthroscopic suture loop fixation.A 32-year-old man, with no significant medical-surgical history, sustained a right non-contact pivoting knee injury during soccer competition. Plain radiographs of knee joint demonstrated intra-articular bone fragment in the intercondylar notch space. The MRI confirmed femoral attachment-ACL avulsion fracture. Then, we planned to perform fixation of femoral attachment-ACL avulsion fracture with arthroscopy suture loop technique. At 5 months after surgery, patient had no pain and swelling knee. The physical examination demonstrated negative Lachman test, anterior drawer test, pivot shift test and patient can return to preinjury daily activity and sport activities., Competing Interests: Competing interests: None declared., (© BMJ Publishing Group Limited 2018. No commercial re-use. See rights and permissions. Published by BMJ.)

The aim of this study is to assess the clinical and radiological outcomes of arthroscopic reduction and fixation of tibial spine avulsion in patients with either open physis or closed physis, using high strength nonabsorbable sutures utilizing intravenous cannula needle as suture passer and retriever. Twenty-six patients of mean age 24.5 years were included in the study with a mean follow-up period of 31 months. Twelve patients had McKeever type III avulsion fracture and 14 had type IV. A follow-up analysis was performed using fracture union time, range of motion assessment, and Lysholm and IKDC (International Knee Documentation Committee) scores with instrumental (KT-1000 arthrometer) laxity assessment. All avulsion fractures showed union at the end of a 3-month follow-up. Mean (± standard deviation [SD]) postoperative Lysholm and IKDC subjective scores were 97.7 (± 3.62, range, 89-100) and 95.55 (± 4.21, 82.8-100), respectively. All patients were graded IKDC grade A except one with grade B. The Lysholm score of open physis group was better than the closed physis group (99.6 vs. 96.5, p  < 0.03), whereas IKDC scores of open versus closed physis group (both subjective and objective) and type III and IV McKeever groups did not reveal any statistical difference. KT-1000 assessment revealed mean (± SD) anterior translation of the tibia as 0.85 (±0.9) mm. At the final follow-up, all patients achieved complete range of movement with no symptom of instability. Two patients underwent adhesiolysis for postoperative stiffness in their knee at 4th month postoperatively. Arthroscopic suture pull-out fixation for type III and IV tibial spine avulsion results in excellent clinical and radiological outcomes in patient with open and closed physis without any significant complications. This is a prospective case series with level of evidence IV., (Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.)

Purpose: To analyze the ultimate failure load, yield load, stiffness, and cyclic elongation of 4 different fixation techniques for posterior cruciate ligament avulsion fractures under cyclic loading and load-to-failure conditions., Methods: In 40 porcine knees, a standardized bony avulsion of the posterior cruciate ligament was generated. The osseous avulsion was fixed by the following techniques through an open approach: (1) direct anterograde screw fixation (3.5 mm with washer), (2) retrograde screw fixation (3.5 mm with washer), (3) cortical suspension button fixation (with No. 2 braided suture), and (4) direct suture cerclage (with No. 2 braided suture). The constructs were cyclically loaded 500 times (10 to 100 N) to measure the maximum elongation. Subsequently, loading to failure was performed, and stiffness, yield load, and maximum load were measured. A 1-way analysis-of-variance test was performed with significance set at P < .05., Results: Button fixation resulted in lower elongation (1.25 ± 0.27 mm) than anterograde screw fixation (2.17 ± 0.74 mm, P = .0058) and the cerclage technique (2.02 ± 0.24 mm, P = .0290). The cerclage technique showed a lower yield load (493.55 ± 88.86 N) than anterograde screw fixation (720.39 ± 139.0 N, P = .0012) and retrograde screw fixation (668.58 ± 147.59 N, P = .0145); it also had lower stiffness and maximum load values (51.2 ± 6.11 N/mm and 631.22 ± 101.22 N, respectively) than the anterograde screw fixation technique (65.6 ± 12.74 N/mm, P = .041, for stiffness and 817.5 ± 145.9 N, P = .008, for maximum load). None of the other results were significantly different (P > .05)., Conclusions: The cortical suspension button and retrograde screw fixation techniques showed comparable structural properties to the direct screw fixation technique. The raw structural properties of suture cerclage still seem eligible enough to consider using this technique for fixation., Clinical Relevance: In this in vitro model, all techniques appear to constitute a biomechanically stable alternative to traditional anterograde screw fixation. In contrast to anterograde screw fixation, these techniques can be performed minimally invasively., (Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Objective: The purpose of this cadaveric study was to compare the strength of a non-locking pre-manufactured loop (SpeedWhip™ [SW]) suture pattern using Fiberwire® with the three-loop pulley (TLP) suture pattern using polypropylene for the surgical repair of canine calcaneal tendon avulsion injuries., Methods: In vitro biomechanical study using 22 paired tendons collected from 11 canine cadavers. Paired tendons were repaired with either a SW suture pattern using Fiberloop® suture or a TLP suture pattern using polypropylene suture. Tensile loads required to create a 1 mm gap, 3 mm gap, and construct failure were measured., Results: The mean loads to achieve a 1 mm gap in the TLP and SW constructs were not significantly different. Gap formation at 3 mm occurred at significantly lower loads for the SW (106.4 ± 21.5N) than for the TLP (127.2 ± 27.5N) (p = 0.05). The mean loads to construct failure for the TLP (172.8 ± 39.4N) and SW (131.3 ± 34.3N) were significantly different (p = 0.001)., Clinical Significance: The TLP with polypropylene suture is superior to the SW using Fiberloop® at resistance to 3 mm gap formation.