Search

This paper identifies the characteristics of a current source inverter operating in discontinuous conduction mode, and proposes a new multiobjective pulse-width modulation (PWM) method to mitigate voltage boosting and harmonic distortion effects. The method takes into account load impedance effects. Controls are also developed to enable transition between the multiobjective PWM method and conventional PWM as the current source inverter operates in discontinuous and continuous modes of operation. The concept is verified experimentally on a 3 kW test bed. [ABSTRACT FROM AUTHOR]

Although the operation of a three-phase current source rectifier (CSR) for ac-to-dc conversion using phase control or low-frequency pulse control is well established in a wide variety of applications, CSR realization using high-frequency pulsewidth-modulation control has been recently studied as a potentially competitive alternative to a voltage source rectifier. In the CSR, reverse blocking gate turn-off switches are realized using series-connected diodes, which prevent any reversal of the dc-link current. A significant consequence of this limitation occurs at light load conditions. The dc-link inductor current enters the discontinuous mode of operation and leads to the loss of the control of the output voltage and a highly distorted input current, which compromise the potential advantages of the approach. This paper characterizes the CSR while operating in the discontinuous conduction mode and proposes a modulation strategy that restores the control of the output voltage and ensures a nearly sinusoidal current at light loads. Simulation and hardware results are provided for a 3-kW laboratory-scale prototype system. [ABSTRACT FROM AUTHOR]

A variable-frequency drive (VFD) having a 440-V front-end current source rectifier (CSR) interface to a voltage source inverter (VSI) feeding a Permanent-Magnet Axial-flux Air Core motor combination is a solution for low-horsepower pump and fan control that is both power dense and compatible with a shipboard environment. This paper describes the control and power platforms for the CSR/VSI and provides experimental results for a 250-V 3.3-kW system. Power density and efficiency comparisons are made between equivalent CSR/VSI- and voltage-source-conversion-based VFDs to demonstrate that the CSR/VSI-based VFD is more power dense. [ABSTRACT FROM AUTHOR]