Search

Switching-linear hybrid envelope tracking (SLH ET) power supplies can achieve both high efficiency and high bandwidth. However, the switching frequency is often required to be far higher than or at least equal to the envelope bandwidth. With the modulation methods advance, the increasing envelope bandwidth may lead to a too high switching frequency to implement. This paper proposes an SLH ET power supply, consisting of a multilevel converter and a linear amplifier connected in series. Based on the multicell configuration of the multilevel converter, a pulse edge independent distribution method is proposed, which can break the control pulses for the multilevel converter into independent rising and falling edges, and rebuild them with new sequences. It can not only reduce the switching frequency to 1/n (n ∊ N) of the envelope bandwidth but also extend the pulsewidths to provide a more reliable and effective driving for high bandwidth applications. A prototype for 2 MHz sine-wave tracking, with 7–27-V output voltage and 90-W peak output power, is fabricated and tested. It is also verified by a 5- and a 10-MHz bandwidth communication envelope. The experimental results validate the proposed method. [ABSTRACT FROM AUTHOR]

A novel interleaved dual buck full-bridge three-level inverter (IDBFTI) is proposed for the grid-connected system in this paper. It retains the advantages of interleaved parallel technology for inverter as follows: reducing the output ripple current and the total harmonic distortion of the output current, increasing the power density of system, and reducing the current stress and thermal stress of power devices. Besides, it can solve the problem of zero sequence circulation current (ZSCC) in interleaved inverter system by the circuit structure, and it also has the advantages of no shoot-through problem, no reverse recovery of the body diode, and three-level output. The interleaved inverter circuits share two power-frequency switches, which are resized for each specific application, and it is easier to extend the system by improving current capability of the two switches. The working principle of this system is introduced in detail, and a 2-kW experimental prototype has been established and tested. Test results verify the principle and the excellent performance of IDBFTI. [ABSTRACT FROM PUBLISHER]

A new single inductor dual buck full-bridge inverter is proposed in this paper. The inverter is improved on the basis of a dual buck inverter, and it retains the advantage of a no reverse recovery of body diode. The dc voltage utilization rate can be increased by adopting the voltage commutation bridge instead of the voltage-dividing capacitors in the inverter. In addition, comparing with other dual buck inverters, the inverter has just one filter inductor, which can make the volume and weight of the system decreased observably and improve the integration. The controlling method, combining the high- and low-frequency modulation, is adopted to weaken the complexity of control and improve the reliability and stability of the system. The operating principle, characteristic analysis, simulation and experiment are provided in this paper. A 1-kW prototype is established and tested, and the results of simulation and experiment verify the correctness of the theoretical analysis. [ABSTRACT FROM PUBLISHER]