Search

This letter proposes a wide-range reconfigurable bandpass filter (WRBPF) based on the cross-shape triple-mode resonator. Varactor diodes and switching diodes are utilized at the ends of the resonator and the positions of external coupling, which combines the two working modes of the low-frequency band and high-frequency band, greatly broaden the tunable range of the center frequency ($f_{0}$). When the 3-dB bandwidth of WRBPF is 180 MHz, $f_{0}$ can be adjusted from 0.78 to 1.93 GHz, and the relative adjustment range is 84.9%. When $f_{0}$ is 1.355 GHz, the absolute bandwidth can be adjusted from 110 to 950 MHz, and the relative bandwidth adjustment range is 8.1%–70.1%. Moreover, the circuit size of WRBPF is only $0.29\,\,\lambda g\,\,\times 0.22\,\,\lambda g$. The experimental results show that WRBPF has not only a simple structure but also an excellent performance. [ABSTRACT FROM AUTHOR]

Piezoelectric energy harvester (PEH) arrays are practical solutions to the low and unreliable power output of a single PEH. However, most PEH circuits are developed for addressing the one-channel ac input from a single PEH. In this article, an extensible rectifier-less synchronized switch harvesting on inductor (ReL-SSHI) array interface with the maximal power point tracking (MPPT) function to manage the multiple ac inputs from the PEH arrays is designed. The ac–dc conversion is performed by the ReL-SSHI topology with passive peak switches featured with self-powered characteristic and fast cold-start. Only one shared inductor is employed, greatly reducing the circuit volume and cost. The MPPT module for each channel is implemented by a simple envelope detector and an ultra-low power hysteresis controller and achieves continuous energy extraction by adapting the fractional normal-operation voltage method. A developed discrete array interface able to handle three PEHs effectively executes the MPPT for each channel with the uphill and downhill response speeds of 2.0 and 7.1 V/s, and a maximal MPPT efficiency of 97.1%. This circuit boosts the power output by 485% compared with that by the traditional full-bridge rectifier, around 33% higher than that from existing synchronous electric charge extraction array interfaces. [ABSTRACT FROM AUTHOR]

Piezoelectric energy harvester (PEH) arrays are promising in many application scenarios. However, few interface circuits have been developed to manage the multiple ac inputs from PEHs. This article proposes an extensible parallel synchronized switch harvesting on inductor array interface scheme to realize a multiinput conversion from PEH arrays. We develop a split-inductor-capacitor topology that can extract electrical energy from multiple PEHs. The proposed circuit topology effectively handles the inductor access conflict in the cases of PEHs with close, identical, and opposite vibration phases, insensitive to ac input phase changes. For demonstrating the capability of dealing with multiple ac inputs from PEHs and the enhancement effect on power output, we construct and test a self-powered three-channel array circuit with the passive peak detection function. Excited by sinusoidal vibrations, our circuit effectively avoids the energy return and efficiently achieves the power combination of the three PEHs. Compared with the classic full-bridge circuit, the proposed circuit helps increase the power output by 4.8 times. Also, to show the universality of the circuit, the circuit's operation under various excitations istested and analyzed. [ABSTRACT FROM AUTHOR]

To merge the gap between the low-power output of piezoelectric energy harvesters (PEHs) and the high-power demand of sensors of Internet of Things, researchers recently start to explore PEHs arrays. However, few circuits have been developed to manage the multiple ac inputs from PEHs arrays. This article presents a self-powered PEH array interface circuit based on the synchronized switching and discharging to a storage capacitor through an inductor (SSDCI) technique. The array interface can output a maximum total power greater than the sum of each individual peak power, and achieve a high efficiency when multiple PEHs connect to the SSDCI array circuit. Simulation and experiment are performed to demonstrate the advantages of the SSDCI array interface. The tested results show that the designed SSDCI array circuit achieves an efficiency of 82.3% with three input sources, and allows a gain up to 300% in terms of maximal output power compared to the full-bridge rectifier. In addition, only the peak detection is utilized for the switching control; therefore, the SSDCI array circuit is realized more easily and with fewer components compared to the existing synchronous electric charge extraction array interfaces. [ABSTRACT FROM AUTHOR]