Search

This brief addresses inverting switched capacitor converter (SCC) for driving the white light emitting diodes (WLEDs). The various voltage conversion ratios (VCRs) are selected to control the WLEDs blacklights, which helps to save the battery life. The major contribution are developing maximum VCRs for power converter integrated circuits (ICs) and equivalent resistance (Req) accurate calculation which includes all conduction and ohmic losses. Furthermore, inverting SCC (ISCC) experimental results are obtained from prototype model. Accurate Req analyses validates the accuracy of proposed topology. It is designed for low voltage of 10 mV to 0.1 V and it provides the output voltage of −100 mV to −0.5 V. Finally, the novelty of accurate Req calculation in this brief is that the calculation results are verified with experimental ones, particularly, at the transition region (between slow switching limit and fast switching limit). On the other hand, calculation, simulation and experimental results perfectly coincide with each other. Accurate equivalent resistance calculation and average current calculation are compared and some of the recent publications providing the merits of the proposed converter are explained. [ABSTRACT FROM AUTHOR]

Power electronic converters for medium- and high-power/voltage applications employ low-frequency fundamental switching frequencies and, therefore, minimize switching losses. There are two main control techniques of switching angle estimation; total harmonic distortion (THD) minimization and selective harmonic elimination (SHE). In case of the first control technique, the switching angles are found based on THD minimization without being specifically focused on eliminating some exact harmonics. For the SHE control technique, all degrees of freedom, due to available number of switching angles, is used for the elimination of certain low-order harmonics. The basic idea of combining those two control techniques consists of using some degrees of freedom for eliminating certain harmonics and using the others for minimizing the remaining THD content. This generalized problem formulation includes classic minimal THD and SHE problems as special cases. Theoretical developments are verified by the set of experimental cases for the voltage and current THDs selecting characteristic working points over the modulation index range. [ABSTRACT FROM AUTHOR]

This paper addresses theoretical calculation of a single-phase multilevel pulsewidth modulation (PWM) inverter current total harmonic distortion (THD). Analytical approach introduced in late 1980s for a two-level inverter is generalized for an arbitrary level count for a single-phase inverter. Although the obtained closed-form piecewise analytical solutions assume (infinitely) large ratio of switching and fundamental frequencies and pure inductive load, they are practically very accurate for the ratios of (apparent) switching and fundamental frequencies larger than 25–30 and inductance-dominated loads. Along with strict mathematical solutions, simple accurate Bessel function approximation and hyperbolic average trend one are suggested. The formulas clearly reveal a single-phase PWM inverter current THD dependence on modulation index for an arbitrary voltage level count and are easily modified to cover grid-connected cases. [ABSTRACT FROM PUBLISHER]

Many recent multilevel inverter papers end up with voltage total harmonic distortion (THD) values obtained from numerical voltage spectrum calculations (measurements). Motivated by IEEE Standard 519, a part of the multilevel research community uses a limited harmonic count to evaluate the multilevel voltage quality. First, this causes significant voltage THD underestimation, particularly for relatively high frequency PWM. Second, for a three-phase star-connected balanced load with an isolated neutral and phase symmetric modulation strategy, the calculated load line and phase voltage THD become different. However, simple considerations show that line and phase voltage THDs are essentially the same in this case. It may be difficult to judge about the multilevel voltage quality given a numerically calculated (measured) voltage THD value that may be subject to computation errors. Presented are simple smooth hyperbolic voltage THD upper and lower bound approximations for single- and three-phase inverters with nearest synchronous switching. They are valid for arbitrary modulation indices and uniformly distributed level counts and may practically serve as good reference values. [ABSTRACT FROM PUBLISHER]

Voltage total harmonic distortion and quadratic voltage ripple criteria are accepted figures of merit of a multilevel pulse width modulation (PWM) converter voltage quality. The dominating frequency domain approach does not deliver simple closed-form expressions and practically requires accounting up to 40–50 switching harmonics. Assuming infinitely high switching frequency, suggested time domain approach to a multilevel multiphase PWM voltage quality evaluation provides closed-form piece-wise analytical solutions. These simple formulas clearly reveal the dependence on modulation index for arbitrary voltage level and odd phase numbers. The results are applicable to any type of multilevel converters (including interleaved, open winding and other) operated with nearest level/nearest space vector modulation and relatively high switching frequency. [ABSTRACT FROM PUBLISHER]

Presents a comments on the paper, "Nearest and non-nearest three vector modulations of NPCI using two-level space vector diagram - a novel approach," (Babu, N. and Agarwal, P.), IEEE Trans. Ind. Electron., vol. 60, no. 5, pp. 1999-2009, 2013. [ABSTRACT FROM AUTHOR]