Search

Precise wavelength calibration is a critical issue for high-resolution spectroscopic observations. The ideal calibration source should be able to provide a very stable and dense grid of evenly distributed spectral lines of constant intensity. A new method which satisfies all mentioned conditions has been developed by our group. The approach is to actively measure the exact position of a single spectral line of a Fabry-Perot etalon with very high precision with a wavelength-tuneable laser and compare it to an extremely stable wavelength standard. The ideal choice of standard is the D2 absorption line of Rubidium, which has been used as an optical frequency standard for decades. With this technique, the problem of stable wavelength calibration of spectrographs becomes a problem of how reliably we can measure and anchor one etalon line to the Rb transition. In this work we present our self-built module for Rb saturated absorption spectroscopy and discuss its stability., SPIE ANZCOP conference, Melbourne 2019

We present the design for a high resolution near-infrared spectrograph. It is fed by a single-mode fiber coupled to a high performance adaptive optics system, leading to an extremely stable instrument with high total efficiency. The optical design is a cross-dispersed Echelle spectrograph based on a white pupil layout. The instrument uses a R6 Echelle grating with 13.3 grooves per mm, enabling very high resolution with a small beam diameter. The optical design is diffraction limited to enable optimal performance; this leads to subtle differences compared to spectrographs with large input slits.

Accurate wavelength calibration is crucial for attaining superior Doppler precision with high resolution spectrographs. Upcoming facilities aim for 10 cm/s or better radial velocity precision to access the discovery space for Earth-like exoplanets. To achieve such precision over timescales of years, currently used wavelength cal- ibrators such as thorium-argon lamps and iodine cells will need to be replaced by more precise and stable sources. The ideal wavelength calibrator would produce an array of lines that are uniformly spaced, narrower than the spectrograph resolution, of equal brightness, cover the entire wavelength range of the spectrograph, and whose frequencies do not change with time. Laser frequency combs are an extremely accurate and stable, albeit technically challenging and costly, option that has received much attention recently. We present an alter- native method that uses a Fabry-Perot (FP) etalon illuminated by a white light source to produce a comb-like spectrum over a wide wavelength range. Previous work focused on the development of passively stabilized FP etalons for wavelength calibration. We improve on this method by locking the etalon to an atomic transition, the frequency of which is known to < 2 x 10-11.7 We use a diode laser to observe both the rubidium (Rb) D2 transition at 780 nm and the etalon transmission spectrum. Saturated absorption spectroscopy is used to resolve the Rb hyperfine lines and precisely determine their locations. Since the etalon spectrum is probed with the same laser, the etalon can be locked by ensuring that one of its transmission peaks coincides with a particular Rb hyperfine peak (via either temperature tuning or a piezoelectric transducer incorporated into the etalon). By measuring the frequency of one etalon peak directly via comparison with the Rb, we remove any drifts or aging effects of the etalon that could cause problems for passively stabilized etalon references. We demonstrate a locking precision that is equivalent to a Doppler precision of 3 cm/s RMS. Our setup is simple and robust, can be used with various etalons, and works in the infrared as well as the visible part of the spectrum. The combination of low cost, ease of use, and high precision make this calibration system an attractive option for new spectrographs and as a retrofit for existing facilities.

Rotational levels of molecular free radicals can be tuned to degeneracy using laboratory-scale magnetic fields. Because of their intrinsically narrow width, these level crossings of opposite-parity states have been proposed for use in the study of parity-violating interactions and other applications. We experimentally study a typical manifestation of this system using $^{138}$BaF. Using a Stark-mixing method for detection, we demonstrate level-crossing signals with spectral width as small as 6 kHz. We use our data to verify the predicted lineshapes, transition dipole moments, and Stark shifts, and to precisely determine molecular magnetic g-factors. Our results constitute an initial proof-of-concept for use of this system to study nuclear spin-dependent parity violating effects., This version is updated in response to referee's comments, and includes a more substantive conclusion than the original version

We report detailed spectroscopic measurements of the X(0)[{sup 1}{sigma}{sup +}](v=0){yields}B(1)[{sup 3}{pi}](v=5) transition in PbO. Using a Stark-modulated laser absorption technique, we have measured the hyperfine constant of {sup 207}PbO in the B(1) state, as well as the B(1)(v=5) rotational constant, X-B isotope shifts, etc. The hyperfine constant of the B(1) state is of interest as a benchmark for calculations of PbO electronic structure related to experiments to search for the electric dipole moment of the electron.

We have developed an optical design for a high resolution spectrograph in response to NASA’s call for an extreme precision Doppler spectrometer (EPDS) for the WIYN telescope. Our instrument covers a wavelength range of 380 to 930 nm using a single detector and with a resolution of 100,000. To deliver the most stable spectrum, we avoid the use of an image slicer, in favor of a large (195 mm diameter) beam footprint on a 1x2 mosaic R4 Echelle grating. The optical design is based on a classic white pupil layout, with a single parabolic mirror that is used as the main and transfer collimator. Cross dispersion is provided by a single large PBM2Y glass prism. The refractive camera consists of only four rotationally symmetric lenses made from i-Line glasses, yet delivers very high image quality over the full spectral bandpass. We present the optical design of the main spectrograph bench and discuss the design trade-offs and expected performance.