Search

• Three-phase four-wire loads can be balanced by a Balancing Capacitive Compensator. • Variable load can be balanced by an Adaptive Balancing Capacitive Compensator-ABCC. • A Static Var Compensator type ABCC is a high efficiency solution. • This article presents and validates a new method of sizing an ABCC. Nowadays, there is an increasing development of equipment type Custom Power Devices (CPDs) designed to ensure a high level of electrical power quality at the Point of Common Coupling (PCC). Most of these devices are built as advanced power electronics applications, such as the Switching Power Converters (SPCs) category. However, for a wide range of applications in consumer installations and electricity distribution operators, such as power factor correction, load balancing, voltage regulation, or flicker mitigation, the reactive power compensators based on passive circuit elements, Reactive Power Compensators (RPCs) are successfully used. The most efficient RPCs are those built so that they may adapt to variable regimes, known as Static Var Compensators (SVCs). Two of the usual functions of a SVC, namely power factor improvement and load balancing in a three-phase distribution network, can be achieved simultaneously by using an unbalanced SVC built in the version of Adaptive Balancing Reactive Compensator (ABRC). The paper briefly–outlines the mathematical model and operation of a Balancing Reactive Compensator (BRC) for a three-phase four-wire network. Then, moves on to develop a direct method of sizing based on equations that directly link the susceptances' values of the compensator with the real and imaginary components of load sequence currents. The problem is to determine the weight of these components, meaning their degree of compensation, by requiring only capacitive or null susceptances and avoiding capacitive over-compensation of positive sequence currents. Thus, a particular case of BRC, i.e. a Balancing Capacitive Compensator (BCC) is obtained, which keeps the same functions, but has the advantage of reducing costs by eliminating high-power single-phase coils and by simplifying the compensation control system. The paper also presents the numerical results and the conclusions of a case study on the application of the method, performed using two computational and modeling software tools. Experimental laboratory determinations and modeling under nonsinusoidal conditions complete the analysis. The results demonstrate the correctness of the new method of solving the sizing problem and once again validate the unbalanced capacitive compensation as an efficient method of power factor improvement and load balancing at a PCC belonging to a three-phase four-wire distribution network. [ABSTRACT FROM AUTHOR]

To increase the electrical power quality, in the last decades, an intense development in the last decades of high-performance equipment built as advanced power electronics applications, such as the compensators from Switching Power Converter category, has taken place. For all that, Reactive Power Compensators (RPC) based on passive circuit elements, such as Static var Compensators (SVCs), still occupy a wide range of applications in customer and installations of the distribution system installations. The functions of power factor (PF) improvement and load balancing in a three-phase distribution network can be achieved with an unbalanced SVC, known as the Adaptive Balancing Reactive Compensator (ABRC). Presenting first the mathematical model of the initial sizing and the working mechanism of a Balancing Reactive Compensator (BRC) for a three-phase four-wire network, this article develops a compensator resizing algorithm through an iterative change of the initial sizing to transform the compensator into a Balancing Capacitive Compensator (BCC), which keeps the same functions. By using two computational and modeling software tools, a case study on the application of the method was carried out, demonstrating the availability of the sizing problem solution and validating the unbalanced capacitive compensation as an efficient way to PF improving and load balancing in a PCC (Point of Common Coupling). [ABSTRACT FROM AUTHOR]

Nowadays, improving the power quality at the Point of Common Coupling (PCC) between the consumers’ installations and the distribution system operators’ installations depends more and more on the use of specialized equipment, able to intervene in the network to eliminate or diminish the disturbances. The reactive power compensators remain valid solutions for applications in consumer and electricity distribution, in those situations when the criterion regarding the costs of installing and operating the equipment is more important than the ones related to the reaction speed or the control accuracy. This is also the case of the equipment for power factor improvement and load balancing in a three-phase distribution network. The two functions can be achieved simultaneously by using an unbalanced static var compensator, known as an adaptive balancing compensator, achieved by adjusting the equivalent parameters of circuits containing single-phase coils and capacitor banks. The paper presents the mathematical model for the sizing and operation of a balancing reactive compensator for a three-phase four-wire network and then presents some resizing methods to convert it into a balancing capacitive compensator, having the same functions. The mathematical model is then validated by a numerical application, modelling with a specialized software tool, and by experimental laboratory determinations. The paper contains strong arguments to support the idea that a balancing capacitive compensator becomes a very advantageous solution in many industrial applications. [ABSTRACT FROM AUTHOR]