Search

To meet the new international efficiency (IE) standards, line-start (LS) synchronous reluctance motors (SyRMs) are now being considered. Conventional star and delta windings are usually employed in LS SyRMs. However, combined star-delta winding has higher winding factor and lower magneto-motive force (mmf) harmonics compared to conventional star and delta windings. Hence, in this paper, LS SyRM and LS ferrite assisted SyRM with star and star-delta winding are analyzed and their performance indices are compared. A winding function analysis is used for the design of star and star-delta windings. Further, the effect of zero sequence current on the performance of the motors under comparison is presented in detail. Star and star-delta winding prototype LS SyRMs with and without ferrite magnets in the rotor are fabricated. Experimental studies are carried-out on these prototypes and the results are presented which are in close agreement with the simulation results. [ABSTRACT FROM AUTHOR]

Electric motors used for irrigation applications contribute to a major part of worldwide energy demand. Efficiency improvement of motors used in these applications is the need of the hour. Usually, line-start (LS) induction motors are used in these applications. However, they are relatively inefficient compared to permanent magnet (PM) motors. On the other hand, PM motors have high initial cost compared to induction motors. In view of this, magnet-less machines like synchronous reluctance motors (SyRM) and PM assisted SyRM are being preferred. SyRM has poor power factor compared to induction motor and hence PM assisted SyRMs are becoming popular. In this article, a 2-pole multi-barrier LS ferrite assisted SyRM is proposed for a bore-well submersible water pump. Two-pole rotor geometry is not extensively studied for LS SyRMs. Further, the issues of ferrite magnet demagnetization for 2-pole LS applications are not explored. A separate cage is avoided by utilizing the rotor flux barriers as a cage, thereby reducing the number of ribs while housing the magnets. This improves the power factor and efficiency of proposed motor. Analytical and finite element analysis (FEA) are used for design of the proposed motor. Further, a prototype is fabricated and experimental results are presented. [ABSTRACT FROM AUTHOR]

Abstract—This article describes the development of a line start permanent magnet synchronous motor with a rotor containing interior mounted magnets. The rotor is a hybrid of both circumferentially as well as radially magnetized magnets arranged so it produces consequent poles. Steady-state and transient performances of the line start permanent magnet synchronous motors have been analyzed by using time-stepping finite-element analysis. Simulation results show that the optimum performance of the rotor is achieved for a specific magnet volume, a substantial improvement on performances of all such rotors reported so far (based on the detailed study of all these rotor types). The hybrid rotor has improved the synchronous performance of the machine without degrading its starting characteristics when compared with an equivalent induction motor. Two experimental prototypes of the proposed design have been built in the laboratory, and their performances have been compared with the performance of a conventional line start permanent magnet synchronous motor having only circumferentially magnetized magnets in its rotor, as well as that of a standard induction motor of the same frame size and physical dimensions. The results indicate that the proposed hybrid interior rotor significantly improves machine performance. [ABSTRACT FROM PUBLISHER]