Search

With high surrounding temperatures, winding resistance increases and thus lowers the operational efficiency of a motor. To meet the large application requirements and conform with the ever-increasing energy-efficiency regulations for pump equipment in the metals industry, consistent efforts have focused on producing single-phase motors that can deliver superior performance at a low cost. Because the steady-state rotational speed is synchronized and no driver circuit is required, a direct-on-line synchronous reluctance motor is a potentially viable alternative to the commonly adopted induction motors. Its inherently simple structure and comparably low operational speed necessitate a challenging structural design for accomplishing the high-efficiency objectives of pump applications. These challenges and their potential solutions are reported in detail. By employing a systematic design scheme and including thermal concerns of the performance, a competitive high-efficiency single-phase direct-on-line synchronous reluctance motor for pump applications in various metal industry equipment was offered. [ABSTRACT FROM AUTHOR]

To meet the severe operating conditions in the metal industry, more thorough design and operational assessments about those implemented electric motors for specific applications must be emphasized. With its inherent robust structure, the induction motor is generally adopted to fulfill such driven objective. However, due to global warming and energy conservation concerns, those strictly enforced regulations have potentially increased the complexity and cost of high efficiency induction motor. Since the synchronous reluctance motor (SynRM) has relatively simpler structure with no copper loss in its rotor, it is a very attractive alternative for accomplishing the high-efficiency objectives of those common hoist, punch, roller, and pump applications. In addition, to eliminate drive circuits that can further reduce the overall system construction costs, the rotor barriers of the SynRM can be equipped with direct-on-line capability (DOL_SynRM) with conductors filled in. The impacts to the operational performance of these DOL_SynRMs for different applications will all be thoroughly investigated. The competitive high-efficiency DOL_SynRMs for driving various metal industry equipment can thus be offered. [ABSTRACT FROM AUTHOR]

To meet different loading requirements in the metal industry, special attention must be paid to the operational performances and start-up characteristics of those electric motors implemented for desired driven applications. However, because of the global warming and energy conservation concerns, the enforced operational regulations have increased the complexity of those commonly applied induction motors for supplying the desired equipment driven forces. By adopting the same stator, the synchronous reluctance motor (SynRM) can be achieved with properly redesigned rotor structure of an induction motor. Due to its robust structure and lack of secondary copper loss, it is very competitive for the related hoist, punch, roller, and pump applications. Furthermore, by inserting adequate ferrite permanent magnets and conductors into the rotor barriers, composition designs of the direct-on-line SynRMs (DOL_SynRMs) will also be proposed. The operational characteristics of the DOL_SynRMs for fulfilling different specifications will all be thoroughly investigated and confirmed by experimental measurements. The DOL_SynRM structures that can provide potential alternatives for related high-efficiency metal industry-driven applications can thus be validated. [ABSTRACT FROM AUTHOR]

To meet the higher operational efficiency regulations of electric motors due to energy-conservation concerns, specific design efforts have been dedicated to those motors for different industrial application requirements. Since the synchronous reluctance motor (SynRM) is generally designed based on the same stator structure as that of the induction motor and operated at synchronous speed, whereas no electrical contact to its rotor, it is capable of providing a robust structure and no rotor copper loss. Such features are very attractive for the related hoist, punch, roller, and pump applications that are commonly adopted in the metals industry. By equipping adequate power factor correction and line-start capabilities, the detailed designs and performance analyses of the SynRMs with a common rotor structure composed by laminated electrical steels will be proposed. Based on this common rotor structure, the operational characteristics of the SynRMs for fulfilling different specifications will all be thoroughly investigated. Confirmed by experimental validations, valuable guidance for related SynRM constructions and applications can thus be provided for metals industry and motor designers. [ABSTRACT FROM AUTHOR]