Search

A new technique is proposed for loss of field (LOF) detection in synchronous generators (SGs). The proposed scheme employs the variations of SG angular velocity ∆ωφ and load angle ∆δφ to reach this goal, while the mentioned parameters are estimated through air gap flux estimation. The proposed scheme performance is evaluated using realistic simulation case studies based on IEEE C. 37. 102 standard compared to the conventional impedance‐based one. The obtained results show that the presented scheme excels the conventional scheme from speed and security viewpoints. Moreover, the estimation procedure of ∆ωφ and ∆δφ is experimentally validated by using a 10 kVA SG and the results demonstrate that the proposed technique can be easily set and implemented. [ABSTRACT FROM AUTHOR]

The impacts of the static synchronous compensator (STATCOM) on the traditional loss of excitation (LOE) protection are investigated in this article. To do a comprehensive study, a common and realistic excitation system is developed for the generator by employing the phase-domain model of the synchronous generator accessible in the real-time digital simulator. Using such a model, the LOE phenomenon is realistically studied in accordance with IEEE Standard C37. 102-2016, while the generator dynamics along with the LOE relay performance are investigated through different types of partial and complete LOE events. It is shown that in the presence of STATCOM, two major impacts on the generator and its LOE protection can be expected: 1) it imposes an additional time delay on the relay to detect the LOE failures, which depends on the generator initial loading and the type of LOE failure and 2) it might lead the generator to reach a new stable operating point without experiencing a loss of synchronism condition, during an improper changeover from automatic voltage regulator to manual voltage regulator operating mode. The related consequences for both of the impacts are discussed in this article, and some solutions are suggested to deal with the probable negative aspects. [ABSTRACT FROM AUTHOR]

A new approach for generator loss of field (LOF) protection is proposed by estimating the field current based on the generator measurable parameters. The main idea of the proposed approach is that a significant difference will be created between the measured excitation and the estimated field currents during LOF occurrence. A differential index is introduced to monitor such difference and consequently to detect LOF failures. A detailed and realistic field circuit is considered for the generator by using the phase-domain model of the generator in the real-time digital simulator, while different types of LOF events can be simulated through such model as well. The obtained results show that the presented technique can detect various types of LOF events much faster than the conventional impedance-based scheme. Moreover, it exhibits more security than the conventional technique in the face of power system disturbances (e.g., stable power swing and out-of-step conditions). [ABSTRACT FROM AUTHOR]

A flux-based technique is proposed for the on-line detection, localization and discrimination of stator and rotor turn-to-turn faults in synchronous generators, using the measured air-gap rotational magnetic field. Simple magnetic field sensors (MFSs) are installed in the stator slots at different regions, and the corresponding induced voltages are measured. Several differential voltages are then obtained to give a picture of the rotational magnetic field symmetricity, whose distortions indicate the presence of the stator or rotor faults. The proposed diagnostic technique is presented in detail and validated initially by simulation results obtained with a finite element simulation package and afterwards through the experimental tests. The obtained results demonstrate that the proposed technique can be used to detect and discriminate stator and rotor turn-to-turn faults with appropriate sensitivity. In addition, the region of the stator turn-to-turn faults can be identified as well. [ABSTRACT FROM AUTHOR]

A real-time realistic framework for synchronous generator loss of field (LOF) protection studies is suggested in this paper by using the real-time digital simulator, which allows the user to realistically model the generator field supply circuit. By using such framework, the performance of LOF protection algorithms can be comprehensively evaluated in the face of the various LOF events including the short circuit and two types of the open circuit events, while the open circuit occurrence cannot be studied in the conventional simulation programs. The obtained results demonstrate that the generator dynamics are significantly different in the face of various LOF failures and then all of them must be regarded to develop the new LOF protection algorithms. By using the suggested framework, the performance of some recently proposed schemes along with the conventional impedance and the admittance relays are comprehensively evaluated. The obtained results from applying the various LOF failures show that, against the conventional relays, the new schemes cannot detect all types of LOF failures and so, they do not have enough reliability. [ABSTRACT FROM AUTHOR]

Loss-of-field (LOF) phenomenon in synchronous generators may cause equipment damage and voltage drop in the power system, which can be terminated to a blackout. Conventional schemes, which detect LOF on the basis of the measured impedance from the generator terminal viewpoint, have some major drawbacks such as low speed, complicated setting procedure, and unsecure performance in the face of similar phenomena, e.g., stable power swing. In this paper, different electrical quantities of the generator including terminal voltage (V), current (I ), active (P) and reactive power (Q), and power angle (δ) variations are studied to achieve a secure technique for LOF protection in synchronous generators. Comprehensive studies show that a simple criterion based on polarities of V, Q, and δ variations is accessible to achieve this goal, which does not need a complicated procedure to set it. To evaluate the performance of the proposed algorithm, some cases are simulated on sample power systems under various operating conditions. Also, superiority of the proposed algorithm in comparison with the other schemes is proven by the obtained results, as well. Moreover, the proposed technique is experimentally tested by using some 2-kVA laboratory generators to detect LOF. [ABSTRACT FROM AUTHOR]

Loss of field (LOF) phenomenon in synchronous generators may cause serious damages and voltage drop in the power system, which can result in a blackout. Conventional methods, which detect LOF on the basis of the measured impedance from terminal viewpoint, are slow and may exhibit mal‐operation in the face of other phenomena, e.g. stable power swing (SPS). In this paper, a novel technique is proposed to detect LOF in synchronous generators on the basis of some electrical quantities variations including voltage of terminal (V), current (I), active power (P), reactive power (Q) and power angle (δ). To evaluate the performance of the proposed algorithm, some cases are simulated under various operation conditions. Obtained results show that this algorithm on the basis of V, Q and δ not only can be considered as a fast LOF detector in comparison with the conventional impedance‐based schemes, but also it is a robust and secure technique in the face of SPS and other power system disturbances. The proposed algorithm is tested by using an experimental setup including the laboratory synchronous generators, too. The obtained results show that the proposed technique can exhibit suitable performance in the actual conditions. [ABSTRACT FROM AUTHOR]