Search

The calibration of channel imbalances is currently the main concern in polarimetric calibration (POLCAL) since the crosstalk of recent polarimetric synthetic aperture radar (Pol-SAR) systems is lower than −20 dB. The existing channel imbalance calibration method without corner reflectors utilizes both volume-dominated and Bragg-like targets. However, there are two limitations to using volume-dominated targets. One is that the inaccurate selection of volume-dominated areas in the uncalibrated Pol-SAR images has a negative influence on the estimation of cross-polarization (x-pol) channel imbalance, which subsequently impacts the estimation of copolarization (copol) channel imbalance. The other is that there are minimal volume-dominated areas in some special applications of Pol-SAR, such as planetary exploration. Thus, only selecting Bragg-like targets to estimate the values of both transmitting and receiving channel imbalances, which is proposed in this paper, can avoid the uncertainty brought about by selecting other distributed targets in an uncalibrated imaginary. In addition, the reciprocity assumption and characteristics corresponding to H/ α ¯  decomposition are introduced to eliminate the phase ambiguity for the first time. Compared with previous methods, our method had an obvious advantage in terms of universality, since Bragg-like targets are common in the most illuminating areas. The novel method was applied to both the simulated data from the L-band Advanced Land Observing Satellite (ALOS) and C-band GaoFen-3 (GF-3), and to real data with corner reflectors on site. The results from the simulated data showed that the errors of the amplitude and phase estimation were less than 0.5 dB and 5.0° in most topographical features. Meanwhile, the  V V / H H  terms from all trihedral corner reflectors were less than 0.3 dB for amplitude, and 5.5° for phase after calibration by using the estimated channel imbalances. [ABSTRACT FROM AUTHOR]

As polarimetric antennas can be isolated through excellent electronic frameworks in circular quad-polarization (CQP) synthetic aperture radar (SAR) systems, cross-polarization (x-pol) and co-polarization (co-pol) channel imbalances are more challenging and essential to calibrate than crosstalk in polarimetric calibration (PolCAL). In uncalibrated CQP SAR images without corner reflectors (CRs), the reciprocity and reflection symmetry assumptions of the distributed targets are commonly used to estimate the x-pol and co-pol channel imbalances, respectively. To suppress the influence of additive noise on determining channel imbalances through distributed targets, high signal-to-noise ratio (SNR) distributed targets should be obtained from the x-pol and co-pol channels of the CQP SAR images: namely, surface-dominated and volume-dominated targets. However, some reflection symmetry assumptions used in the existing calibration literature have poor applicability with volume-dominated targets, resulting in unsatisfactory estimation results for the co-pol channel imbalance phase. In this paper, we assess the priority of the reflection symmetry properties of volume-dominated targets used to calibrate the co-pol channel imbalance phase in CQP SAR data synthesized from linear quad-polarization data of ALOS, GF-3, and RADARSAT-2. In the theoretical part, high-priority reflection symmetry (termed semireflection symmetry) assumptions are confirmed as the most suitable for estimating the co-pol channel imbalance phase, and were selected to develop an algorithm for estimating the co-pol channel imbalance phase. Furthermore, based on the novel method for estimating the co-pol channel imbalance phase, a channel imbalance calibration scheme is proposed for CQP SAR systems with reciprocal crosstalk, including extracting surface-dominated and volume-dominated targets, and estimating and filtering channel imbalances. We demonstrate the effectiveness of our proposed scheme with CRs in simulated CQP SAR images. The experimental results show that the calibration scheme is an effective workflow for estimating channel imbalances in CQP SAR systems with reciprocal crosstalk. [ABSTRACT FROM AUTHOR]

The Wishart mixture model is an effective tool for characterizing the statistical distribution of polarimetric synthetic aperture radar (PolSAR) data. However, due to the difficulty in determining the equivalent number of looks, the Wishart mixture model has some problems in terms of practicality. In addition, the flexibility of the Wishart mixture model needs to be improved for complicated scenes. To improve the practicality and flexibility, a new mixture model named the relaxed Wishart mixture model (RWMM) is proposed. In RWMM, the equivalent number of looks is no longer considered a constant for the whole PolSAR image but a variable that varies between different clusters. Next, an innovative algorithm named RWMM-Markov random field (RWMM-MRFt) for supervised classification is proposed. A new selection criterion for adaptive neighborhood systems is proposed in the algorithm to improve the classification performance. The new criterion makes effective use of PolSAR scattering information to select the most suitable neighborhood for each center pixel in PolSAR images. Three datasets, including one simulated image and two real PolSAR images, are utilized in the experiment. The maximum likelihood classification results demonstrate the flexibility of the proposed RWMM for modeling PolSAR data. The proposed selection criterion shows superior performance than the span-based selection criterion. Among the mixture model-based MRF classification algorithms, the proposed RWMM-MRFt algorithm has the highest classification accuracy, and the corresponding classification maps have better anti-noise performance. [ABSTRACT FROM AUTHOR]

Polarimetric synthetic aperture radar (PolSAR) data provide an alternative way for topography retrieval, especially when limited PolSAR data are available. This article proposes a novel topography retrieval algorithm based on the Lambertian backscatter model that further improves the vertical precision of digital elevation model (DEM) generation and requires only one flight. The key idea of the proposed algorithm is to avoid data fluctuations caused by the ratio of the azimuth slope angle to the polarimetric orientation angle (POA). The previous research has confirmed the feasibility of generating a DEM based on single-pass PolSAR data, but its effect on the quality of reference DEM has not been well-explained. To analyze this effect, a large number of experiments on DEM with different resolutions are conducted. In addition, an in-depth analysis of non-linear and terrain-dependent errors is performed. The L-band PolSAR data of NASA/JPL TOPSAR and ALOS-2 PALSAR-2 and interferometric SAR (InSAR) DEM data are used to verify the proposed algorithm. The experimental results show that PolSAR data can be used as an additional reliable information source for DEM fusion under certain conditions to improve the quality of public DEM. [ABSTRACT FROM AUTHOR]

Hybrid-polarimetric architecture may become a new option for spaceborne quadrature-polarimetric (quad-pol) synthetic aperture radar (SAR) mainly due to the range ambiguity improvement without loss of polarization information. To inherit the analytical methods developed for the conventional quad-pol SAR data, it is necessary to transform the hybrid quad-pol SAR data into a linear polarimetric basis. However, this operation will result in deterioration of azimuth ambiguity performance. The theoretical analysis on range and azimuth ambiguities in quad-pol SAR has been relatively complete, which is also summarized in this article. Yet, there is no real data to verify the equivalence of polarization information and to compare the ambiguity levels. Based on P-band airborne experiment, real hybrid and conventional quad-pol SAR data are used for comparative verification. In addition, considering that polarimetric target decomposition is often used in the practical applications, we suggest a new perspective from target decomposition for the ambiguities in quad-pol SAR. Identical polarimetric processing results for two sets of comparative data verify that hybrid quad-pol SAR data are indistinguishable from conventional quad-pol SAR data. The demonstrated intensity images and decomposed RGB images with azimuth ambiguities, acquired by the two quad-pol modes, completely conform to the theory. [ABSTRACT FROM AUTHOR]

Polarimetric synthetic aperture radar (SAR) has been extensively used in various remote sensing applications. In this article, a unified framework is designed to compare the classification performance of different polarimetric systems, which include quad-polarimetric (QP), compact-polarimetric (CP), and dual-polarimetric (DP). To avoid problems, such as the lack of uniform standards in feature extraction, the classification algorithm is directly based on the statistical characteristics of the coherency/covariance matrix and is implemented by extending the Wishart mixture model (WMM). The GF-3 data set in San Francisco and the AIRSAR agricultural data set in Flevoland are used in the experiment, and the following conclusions are generated. QP can achieve the highest classification accuracy in all classification tasks. When distinguishing three typical classes (water, urban, and vegetation) with very different scattering characteristics, the performance of different polarimetric systems is similar, and QP has only a slight advantage. For classification tasks of different classes with similar scattering characteristics, CP performs better in agricultural scenes, and the overall accuracy (OA) is only reduced by 3%–4% compared with QP. DP performs better in urban scenes, and OA is only reduced by 1%–3% compared with QP. These conclusions can provide guidance for future payloads’ design and the choice of polarimetric operation mode for existing multi-polarimetric SAR systems to achieve the purpose of giving full play to the advantages of different polarimetric systems. [ABSTRACT FROM AUTHOR]

In this letter, a hierarchical extended multi-component decomposition method (ExMCSM) of polarimetric synthetic aperture radar interferometry (PolInSAR) is proposed. The target of this method is to overcome the overestimation of volume scattering (OVS) and to mitigate the mixed ambiguity of the scattering mechanism. In the proposed method, prior to the decomposition, orientation angle compensation (OAC), and helix angle compensation (HAC) are applied to the coherency matrix to reduce the complexity of the operation. The polarimetric interferometric similarity parameter (PISP) is used to refine the volume scattering models, and the optimal coherence magnitude (${\gamma _{\mathrm{ opt3}}}$) is used as a criterion for the adaptive selection of these volume scattering models. The efficiency of the proposed method is demonstrated using two different test sites. Experimental results demonstrate that the proposed method can effectively represent the scattering characteristics of the ambiguous regions. [ABSTRACT FROM AUTHOR]

Calibration using corner reflectors is an effective way to estimate the distortion parameters of hybrid compact polarimetric (HCP) synthetic aperture radar (SAR) systems. However, the existing literature lacks a discussion on the inconsistency of the amplitude and phase coefficients between measured scattering vectors of different corner reflectors. In response to this problem, this paper first proves that this inconsistency will seriously deteriorate the estimation accuracy of polarimetric distortion parameters. Based on the optimization algorithm, two calibration schemes for simultaneously estimating the traditional distortion parameters and the amplitude/phase coefficients are proposed while ignoring crosstalk (ICT) and considering crosstalk (CCT). In the process of distortion parameter estimation, the idea of "optimizing while compensating" is adopted to eliminate the problem of uneven echo intensity. Simulation results show that both schemes can eliminate the influence of the inconsistency of amplitude and phase coefficients, and estimate distortion parameters accurately. When the received crosstalk level is lower than −30 dB, the ICT scheme can accurately estimate polarimetric distortion parameters. The CCT scheme has a wider application range of crosstalk and can work well when the crosstalk level is lower than −20 dB, but it also has a higher requirement for the signal-to-clutter ratio (SCR). When SCR is greater than 35 dB, the CCT scheme yields higher estimation accuracy than the ICT scheme. In addition, the effectiveness of the calibration schemes is verified based on the L-band measured data acquired by the Aerospace Information Research Institute, Chinese Academy of Sciences. [ABSTRACT FROM AUTHOR]

Soil salinization is a global problem, which seriously damages the ecological environment and considerably reduces agricultural productivity, especially in arid regions. Synthetic aperture radar (SAR) has been widely used in remote sensing due to its weather and sunlight independence. Polarimetric SAR has great potential for large-scale mapping and monitoring salt-affected soils. In this study, we investigate the characteristics of saline soil in extremely arid regions using dual-band quadrature-polarimetric (quad-pol) SAR images acquired by GF-3 (C-band) and ALOS-2 (L-band). Firstly, the effectiveness of the modified dielectric mixing model and integral equation model (IEM) in describing saline soil is evaluated. Secondly, the potential relationships between polarimetric parameters and salinity are discussed in both the C- and L-band, respectively, such as co-polarization ratio, scattering entropy H, and scattering angle α. Finally, a linear regression model for monitoring salt content is established. The main contributions of this article are as follows: (1) Simulation results suggest that the radar backscattering coefficient is a weak function of salinity at low water content, but our experimental data show that soil salinity significantly contributes to the radar backscattering coefficient, which indicates the modified dielectric mixing model and IEM model is not applicable in extremely arid areas. (2) A negative correlation between the co-polarization ratio and salinity is observed, and the correlation coefficients are 0.64 (C-band) and 0.71 (L-band). Besides, scattering entropy and scattering angle exhibit a positive correlation with salinity in the C-band with correlation coefficients 0.686 and 0.669, respectively, whereas a negative correlation is found in the L-band with correlation coefficients 0.682 and 0.680, respectively. This can be attributed to the different penetration depths and sensitivity to the surface roughness of the electromagnetic waves at two frequencies. (3) A regression model for salinity estimating based on radar backscattering coefficient, co-polarization ratio, and scattering entropy is established, with a determination coefficient ( R 2 ) of 0.79 and a root mean square error (RMSE) of 6.56%, allowing us to determine soil salinity from quad-pol SAR images without using backscattering models. Therefore, our results can be a reference for future soil salinity monitoring and inversion. [ABSTRACT FROM AUTHOR]