Search

Rockfalls are a recurrent cause of disruption for transportation corridors running along the bottom of U-shaped alpine valleys. In some scenarios, risk may effectively be reduced only by implementing an early-warning system able to give notice of incipient failures on the slope. This paper describes a successful example of rockfall forecasting and risk management in proximity of the Gallivaggio sanctuary (San Giacomo Valley, Central Italian Alps). Since 2016, a Ground-Based Synthetic Aperture Radar continuously monitored a roughly 500-m high, sub-vertical granitic slope. Monitoring data evidenced the presence and continued movement of a ~ 5000 m3 highly unstable mass, having a projected fall trajectory directly threatening the sanctuary and the adjacent segment of a national road. Traffic and access to the sanctuary were regulated by a sequence of alert thresholds, and restrictive orders were issued according to the activity of the instability. The rock mass eventually fell, and the failure-time was accurately predicted several hours in advance. Despite damage to both the road and buildings, the timely evacuation of the area prevented any loss of life. The case study provides a reference framework to better manage rockfall risk in areas where the installation of adequate protective barriers is not technically feasible. [ABSTRACT FROM AUTHOR]

Stromboli volcano (Southern Italy) is one of the most monitored volcano in the world with a surveillance network that includes a permanently sited ground-based SAR interferometer (GBInSAR). This work is the review of the GBInSAR data gained from the last decade of monitoring activity. The analysis of the entire dataset of GBInSAR measurements allowed the assessment of the deformation field of the northern part of the summit crater area and the Sciara del Fuoco depression. In detail, the main displacements recognized can be related to different factors: 1) the inflation/deflation respectively immediately before and after each new effusive event; 2) the bulging of localized sectors of the volcano involved in the vent opening; 3) the gravitational sliding of the Sciara del Fuoco infill; 4) the movement of lava flows. Accelerations in this sector are related to sheet intrusions, while the possibility of vent opening, associated with small sliding, or catastrophic flank failure are related to highly overpressurized sheets, able to produce high displacement rate in the Sciara del Fuoco. In the summit crater area, the increases in the displacement rate are related to the pressurization of the shallow conduit system, as the consequence of the variation in the magma level (magmastatic pressure) or to the lateral magma migration (lateral conduit expansion or dike intrusion) in response to the increase of the overpressure component. Fluctuations in the displacement rate in the summit crater area can be related to the magma overturning within the conduit, with the increases in displacement rate during the upwelling of less dense magma, while displacement rate decreases as the degassed magma column is pushed out from the conduit (lava flows or overflows). Instead, the decrease in the displacement rate without coeval lava outpouring could be related to the sink of the degassed magma due to density contrast between the gas-poor and the gas-charged magmas. Using the displacement rate in the summit crater area as a proxy for the variation in the pressure condition in conduit (both magmastatic and overpressure components), thresholds for the crises characterized by the occurrence of overflows (eventually associated with major explosions) and flank effusions (eventually associated with paroxysmal explosions) are identified. Small conduit overpressure will produce overflows (sometimes associated with crater-rim collapses), while large magma overpressure will laterally expand the conduit forming NE-SW striking sheets, feeding eruptive vents at the base of the summit crater area and within the Sciara del Fuoco, generating conditions of instability that can evolve into catastrophic collapse of the instable flank. [ABSTRACT FROM AUTHOR]

The Sciara del Fuoco (SdF) collapse scar at Stromboli is an active volcanic area affected by rapid morphological changes due to explosive/effusive eruptions and mass-wasting processes. The aim of this paper is to demonstrate the importance of an integrated analysis of multi-temporal remote sensing (photogrammetry, COSMO-SkyMed Synthetic Aperture Radar amplitude image) and marine geophysical data (multibeam and side scan sonar data) to characterize the main morphological, textural, and volumetric changes that occurred along the SdF slope in the 2020–2021 period. The analysis showed the marked erosive potential of the 19 May 2021 pyroclastic density current generated by a crater rim collapse, which mobilized a minimum volume of 44,000 m3 in the upper Sciara del Fuoco slope and eroded 350,000–400,000 m3 of material just considering the shallow-water setting. The analysis allowed us also to constrain the main factors controlling the emplacement of different lava flows and overflows during the monitored period. Despite the morphological continuity between the subaerial and submarine slope, textural variations in the SdF primarily depend on different processes and characteristics of the subaerial slope, the coastal area, the nearshore, and "deeper" marine areas. [ABSTRACT FROM AUTHOR]

Stromboli volcano (Aeolian Archipelago, Southern Italy) experienced an increase in its volcanic activity from late December 2012 to March 2013, when it produced several lava overflows, major Strombolian explosions, crater-wall collapses pyroclastic density currents and intense spatter activity. An analysis of the displacement of the NE portion of the summit crater terrace and the unstable NW flank of the volcano (Sciara del Fuoco depression) has been performed with a ground- based interferometric synthetic aperture radar (GBInSAR) by dividing the monitored part of the volcano into five sectors, three in the summit vents region and two in the Sciara del Fuoco. Changes in the displacement rate were observed in sectors 2 and 3. Field and thermal surveys revealed the presence of an alignment of fumaroles confirming the existence of an area of structural discontinuity between sectors 2 and 3. High displacement rates in sector 2 are interpreted to indicate the increase in the magmastatic pressure within the shallow plumbing systems, related to the rise of the magma level within the conduits, while increased displacement rates in sector 3 are connected to the lateral expansion of the shallow plumbing system. The increases and decreases in the displacement rate registered by the GBInSAR system in the upper part of the volcano have been used as a proxy for changes in the pressure conditions in the shallow plumbing system of Stromboli volcano and hence to forecast the occurrence of phases of higher-intensity volcanic activity. [ABSTRACT FROM AUTHOR]

Volcano slope instability manifests in many forms, ranging from steady state to punctuated movement, or shallow erosion to deep-seated spreading. The interplay of gravity, magmatic or hydrothermal fluids, and often active tectonics on a volcanic edifice results in complex spatial and temporal variations in deformation kinematics. While this makes the recognition, assessment, and monitoring of volcano slope instability challenging, advancements in Synthetic Aperture Radar (SAR) technology have significantly accelerated our knowledge of instability phenomena and our ability to assess their hazards. This review discusses the applications and challenges of SAR imagery to various slope instabilities at volcanoes around the world. SAR amplitude images are powerful tools for mapping areas of geomorphological changes. These snapshots can be combined using Interferometric SAR (InSAR) to create multi-temporal deformation maps that provide unique information on the evolution of slope failures. Space-borne InSAR has become an economic way to detect changes at volcanoes at very high resolution. Ground-Based InSAR (GBInSAR) can produce frequent SAR images (on the order of seconds to minutes), propelling InSAR from monitoring to surveillance and early-warning applications. However, interpreting InSAR-derived ground deformation signals related to volcano slope instability is still challenging. Deformation from magma rise or variations in hydrothermal systems may be inseparable from persistent, deep-seated flank motion. Similarly, shallow or localized ground motion may occur in overlap with thermal contraction or subsidence of newly emplaced lava or tephra deposits. If triggered to failure, landslides can vary over several magnitudes, from small-volume rock falls that pose only a localized hazard, to large-volume debris avalanches capable of travelling tens of kilometers away from the source. These collapses can have cascading hazards if accompanied by directed blasts or tsunamis, emphasizing the need for continued advancement of our understanding of these events and their consequences. To highlight the utility of SAR for measuring and monitoring mass movement, two case studies of Stromboli (Italy) and Pacaya (Guatemala) volcanoes are discussed in detail, where recent instability events, persistent volcanic activity, and ground truth constraints have resulted in excellent case-histories in applying SAR imagery to understand these potentially hazardous slope instabilities. [ABSTRACT FROM AUTHOR]

On 24 October 2015, following a period of heavy rainfall, a landslide occurred in the Calatabiano Municipality (Sicily Island, Southern Italy), causing the rupture of a water pipeline supplying water to the city of Messina. Following this event, approximately 250,000 inhabitants of the city suffered critical water shortages for several days. Consequently, on 6 November 2015, a state of emergency was declared (O.C.D.P. 295/2015) by the National Italian Department of Civil Protection (DPC). During the emergency management phase, a provisional by-pass, consisting of three 350-m long pipes passing through the landslide area, was constructed to restore water to the city. Furthermore, on 11 November 2015, a landslide remote-sensing monitoring system was installed with the following purposes: (i) analyse the landslide geomorphological and kinematic features in order to assess the residual landslide risk and (ii) support the early warning procedures needed to ensure the safety of the personnel involved in the by-pass construction and the landslide stabilization works. The monitoring system was based on the combined use of Ground-Based Interferometric Synthetic Aperture Radar (GB-InSAR) and terrestrial laser scanning (TLS). In this work, the preliminary results of the monitoring activities and a remote 3D map of the landslide area are presented. [ABSTRACT FROM AUTHOR]

Two paroxysmal explosions occurred at Stromboli on 3 July and 28 August 2019, the first of which caused the death of a young tourist. After the first paroxysm an effusive activity began from the summit vents and affected the NW flank of the island for the entire period between the two paroxysms. We carried out an unsupervised analysis of seismic and infrasonic data of Strombolian explosions over 10 months (15 November 2018–15 September 2019) using a Self-Organizing Map (SOM) neural network to recognize changes in the eruptive patterns of Stromboli that preceded the paroxysms. We used a dataset of 14,289 events. The SOM analysis identified three main clusters that showed different occurrences with time indicating a clear change in Stromboli's eruptive style before the paroxysm of 3 July 2019. We compared the main clusters with the recordings of the fixed monitoring cameras and with the Ground-Based Interferometric Synthetic Aperture Radar measurements, and found that the clusters are associated with different types of Strombolian explosions and different deformation patterns of the summit area. Our findings provide new insights into Strombolian eruptive mechanisms and new perspectives to improve the monitoring of Stromboli and other open conduit volcanoes. [ABSTRACT FROM AUTHOR]

We present a joint exploitation of space-borne and ground-based Synthetic Aperture Radar Interferometry (InSAR) and Multi Temporal (MT) InSAR measurements for investigating the Stromboli volcano (Italy) deformation phenomena. In particular, we focus our analysis on three periods: a) the time interval following the 2014 flank eruption, b) the July–August 2019 eruption and c) the following post-eruptive phase. To do this, we take advantage from an unprecedented set of space-borne and ground-based SAR data collected from April 2015 up to November 2019 along two (one ascending and one descending) Sentinel-1 (S-1) tracks, as well as, in the same period, by two ground-based systems installed along the Sciara del Fuoco northern rim. Such data availability permitted us to first characterize the volcano long-term 3D deformation behavior of the pre-eruptive period (April 2015–June 2019), by jointly inverting the space-borne and ground-based InSAR measurements. Then, the GB-SAR measurements allowed us to investigate the sin-eruptive time span (3rd July 2019 – 30th August 2019) which revealed rapid deformation episodes (e.g. more than 30 mm/h just 2 min before the 3rd July 2019 explosion) associated with the eruptive activity, that cannot be detected with the weekly S-1 temporal sampling. Finally, the S-1 measurements permitted to better constrain the post 2019 eruption deformations (31st August 2019 – 5th November 2019), which are mainly located outside the GB-SAR sensed area. The presented results demonstrate the effectiveness of the joint exploitation of the InSAR measurements obtained through satellite and terrestrial SAR systems, highlighting their strong complementarity to map and interpret the deformation phenomena affecting volcanic areas. • A joint exploitation of spaceborne and ground-based InSAR measurements is presented. • The InSAR analysis focuses on Stromboli volcano, from April 2015 to November 2019. • Two Sentinel-1 tracks and two independent GB-SAR systems have been used. • Results show a strong complementarity of spatial and terrestrial InSAR measurements. [ABSTRACT FROM AUTHOR]

Volcano slope instability manifests in many forms, ranging from steady state to punctuated movement, or shallow erosion to deep-seated spreading. The interplay of gravity, magmatic or hydrothermal fluids, and often active tectonics, results in complex spatial and temporal variations in deformation kinematics; deformation from magma rise or variations in hydrothermal systems may be inseparable from deep-seated and persistent flank motion. Similarly, shallow or localized ground motion may overlap with thermal contraction or subsidence of newly emplaced lava or tephra deposits. While this makes the recognition, assessment, and monitoring of volcano slope instability challenging, advancements in Synthetic Aperture Radar (SAR) technology have accelerated our knowledge of instability phenomena and our ability to assess their hazards. SAR amplitude images are powerful tools for mapping areas of geomorphological changes, which can be combined using Interferometric SAR (InSAR) to create multi-temporal deformation maps that provide unique information on the evolution of slope failures. Space-borne InSAR has become an economic way to detect changes at volcanoes at very high resolution. Ground-Based InSAR (GBInSAR) can produce frequent SAR images, propelling InSAR from monitoring to surveillance and early-warning applications. Various InSAR techniques have been used to measure persistent, transient, or surficial slope movement of at least ten volcanoes, some of which have had several periods or instances of flank motion. To highlight the utility of SAR for measuring and monitoring mass movements, studies at Stromboli (Italy) and Pacaya (Guatemala) volcanoes are reviewed in detail, where recent instability events, persistent volcanic activity, and ground truth constraints have resulted in excellent case-histories in applying SAR imagery to understand these potentially hazardous slope instabilities. At Stromboli, years of monitoring with GBInSAR has led to an operational approach to mitigate landslide risks by defining a relationship between measured displacement rates and associated instability and eruptive hazards. This aided in anticipating a flank eruption 11 hours in advance in 2014. At Pacaya, the combined use of aerial and satellite InSAR time series successfully measured a large transient co-eruptive event in 2010. This was determined to have initiated a new stage of rifting, implicating new potential hazards for future eruptions. Monitoring slope instability over the world's volcanoes will continue to increase with new radar satellites schedule to launch around 2020-2022, including ALOS-4 PALSAR by JAXA, NISAR by NASA-India, and SAOCOM by Argentine Space Agency. These satellites will provide more frequent images and improved coherence and coverage than previous sensors, with the potential to move from observing and explaining volcanic slope instability to tracking and forecasting failures. However, this enhanced mitigation potential relies on the manageability, rapidity, and fusing of these large datasets, and the integration of measured persistent or flank unrest into emergency planning. [ABSTRACT FROM AUTHOR]