Search

The arterial blood sample collector produced in large quantities often fails to meet the requirements due to missing components in the packaging bag, and traditional manual detection methods are both inefficient and inaccurate. To solve this problem, a PyCharm-integrated development environment was used to study image processing and recognition algorithms for identifying components inside the packaging bag of the HN-3 arterial blood sample collector. The machine vision system was used to capture images of the packaging bags of the HN-3 Arterial blood sample collector. Template matching was employed to extract the packaging ROI, and the threshold segmentation method in the HSV color model was used to extract material features based on the packaging ROI. Morphological processing algorithms such as dilation or erosion were used to enhance the connectivity of the extracted features. The existence of components was determined by setting thresholds for the connected domain area or length. The results of the recognition experiment show that the false detection rate is 0.2%, the missed detection rate is 0%, and the average image processing time per product is no more than 39 ms. Compared with manual recognition methods, the efficiency and accuracy have been improved by 36.5 times and 2.3%, respectively. The experimental results confirm the effectiveness of the image processing algorithm.

More available warning time and a quicker rapid intensity reporting after earthquake are of great significance to the earthquake early warning system and the after earthquake rescue. The improvement of the calculation speed of the instrument intensity and the accuracy of the calculation results are very important for the whole early warning process. The development of intensity in Japan has gone through three stages：instrument intensity of JMA in 1996，real-time instrument intensity in 2008 and real-time instrument intensity in 2013. This paper explains these three and gets the contract picture by using the data in the 2011 off the pacific coast of Tohoku earthquake. The instrument intensity using 2013 method is quicker than that using 1996 method，and the instrument intensity using 2013 method is closer to that using 1996 method，compared with that using 2008 method.

An improved strain-transfer model was developed for surface-bonded sapphire-derived fiber Bragg grating sensors. In the model, the core and cladding of the fiber are separated into individual layers, unlike in conventional treatment that regards the fiber as a unitive structure. The separation is because large shear deformation occurs in the cladding when the core of the sapphire-derived fiber is heavily doped with alumina, a material with a high Young’s modulus. Thus, the model was established to have four layers, namely, a core, a cladding, an adhesive, and a host material. A three-layer model could also be obtained from the regressed four-layer model when the core’s radius increased to that of the cladding, which treated the fiber as if it were still homogeneous material. The accuracy of both the four- and three-layer models was verified using a finite-element model and a tensile-strain experiment. Experiment results indicated that a larger core diameter and a higher alumina content resulted in a lower average strain-transfer rate. Error percentages were less than 1.8% when the four- and three-layer models were used to predict the transfer rates of sensors with high and low alumina content, respectively.

End-plate surface distance is important for length value dissemination in the field of metrology. For the measurement of distance of two surfaces, the positioning method is the key for realizing high precision. A practical method with nanometer positioning precision is introduced in consideration of the complexity of positioning laser sources of the traditional methods and new methods. The surface positioning is realized by the combination of laser interference and white light interference. In order to verify the method, a 0.1 mm height step is made, and an experiment system based on the method is established. The principle and the basic theory of the method are analyzed, and the measures to enhance the repeatability from optical and mechanical factors and signal processing methods are presented. The experimental result shows that the surface positioning repeatability is in the order of 10 nm. The measurement uncertainty evaluation shows that the standard uncertainty is 21 nm for a 0.1 mm step. It is concluded that the method is suitable to be applied to the length measurement standard of the lab.