Search

Astronomical Light Optical Hybrid Analysis (ALOHA@3.39 μm) is a new instrumental concept designed for high angular resolution astronomical imaging in the L band. The originality of our experimental device is to include a frequency conversion process in each arm of the interferometer that frequency shifts the mid-infrared signal to the near-infrared domain. This method relaxes the stringent limitations due to the thermal noise background radiated by the instrument itself. The aim of this paper is to estimate the current sensitivity limit of the instrument and validate the ability to provide calibrated contrasts with a quasi-monochromatic signal. We demonstrate the possibility to measure fringe contrasts greater than 94.5 per cent with a signal-to-noise ratio close to 7. The flux level at the input of each arm of the interferometer is then equal to 100 fw. This would correspond to a zero magnitude star in the L band for a 1 m2 telescope surface and a 3 nm converted spectral bandwidth. [ABSTRACT FROM AUTHOR]

We report on the implementation of a mid-infrared (MIR) interferometer prototype for furthermore application in the framework of high-resolution imaging in astronomy. This paper demonstrates the possibility to extend to the L band our experimental study performed on the up-conversion interferometer in H band. This in-laboratory preliminary experiment allowed us to get the first fringes with the MIR Astronomical Light Optical Hybrid Analysis (ALOHA) @3.39 μm up-conversion interferometer with a bright quasi monochromatic source (HeNe 3.39 μm). A stable contrast greater than 98 per cent has been reached. This opens the possibility to propose an alternative instrument for the demanding domain of high resolution imaging in the MIR domain. [ABSTRACT FROM AUTHOR]

Context. Amongst the new techniques currently developed for high-resolution and high-dynamics imaging, the hypertelescope architecture is very promising for direct imaging of objects such as exoplanets. The performance of this instrument strongly depends on the co-phasing process accuracy. In a previous high-flux experimental study with an eight-telescope array, we successfully implemented a co-phasing system based on the joint use of a genetic algorithm and a sub-aperture piston phase diversity using the object itself as a source for metrology. Aims. To fit the astronomical context, we investigate the impact of photon noise on the co-phasing performance operating our laboratory prototype at low flux. This study provides experimental results on the sensitivity and the dynamics that could be reached for real astrophysical observations. Methods. Simulations were carried out to optimize the critical parameters to be applied in the co-phasing system running in the photon-counting regime. We used these parameters experimentally to acquire images with our temporal hypertelescope test bench for different photon flux levels. A data reduction method allows highly contrasted images to be extracted. Results. The optical path differences have been servo-controlled over one hour with an accuracy of 22.0 nm and 15.7 nm for 200 and 500 photons/frame, respectively. The data reduction greatly improves the signal-to-noise ratio and allows us to experimentally obtain highly contrasted images. The related normalized point spread function is characterized by a 1:1×10-4 and 5:4×10-5 intensity standard deviation over the dark field (for 15 000 snapshots with 200 and 500 photons/frame, respectively). Conclusions. This laboratory experiment demonstrates the potential of our hypertelescope concept, which could be directly transposed to a space-based telescope array. Assuming eight telescopes with a 30 cm diameter, the I-band limiting magnitude of the main star would be 7.3, allowing imaging of a companion with a 17.3 mag. [ABSTRACT FROM AUTHOR]

ABSTRACT We investigate the sensitivity of frequency conversion of starlight using a non-linear optical sum frequency process. This study is being carried out in the context of future applications of optical interferometry dedicated to high-resolution imaging. We have implemented a complete experimental chain from telescope to detector. The starlight frequency is shifted from the infrared to the visible using an optically non-linear crystal. To fulfil the requirements of interferometry, our experimental setup uses spatially single-mode and polarization maintaining components. Due to the small size of the collecting aperture (8 inches Celestron C8) with a 3 nm spectral bandwidth, on-sky tests were performed on bright stars in the H band. The detection was achieved in a true photon counting operation, using synchronous detection. Betelgeuse (HMag =−3.9), Antares (HMag =−3.6) and Pollux (HMag =−1) were successfully converted and detected in visible light. Despite the low transmission of our experiment, our results prove that the efficiency of frequency conversion offers sufficient sensitivity for future interferometric applications. [ABSTRACT FROM AUTHOR]