Search

We demonstrate the temperature distribution, optical and laser performances of a YAP/Tm:YAP/YAP composite crystal fabricated by thermal bonding technology. The thermal distribution simulations show that the bonded crystal possesses a higher thermal dissipation efficiency than that of the unbonded one. The wavefront distortion of the bonded YAP/Tm:YAP crystal is close to the unbonded Tm:YAP, indicating a high bonding quality. The optical transmission spectra and absorption loss suggest that the bonding region is a uniform transition and almost without scattering interface. Moreover, compared with the un-bonded Tm:YAP crystal, a maximum average output power of 41.2 W and slope efficiency of 49.5% are achieved on the bonded crystal, which are increased by 28.4% and 21.0%, respectively. Therefore, the 1.94 μm laser performance can be effectively improved by combining pure YAP crystals on the Tm:YAP crystal as end-caps. [ABSTRACT FROM AUTHOR]

In this study, we demonstrate the laser performance of LD end-pumped LuYSGG/Er:LuYSGG composite crystal. Thermal distribution simulations by varying the pump spot size indicate that the suitable pump power density is a key factor affecting the laser performance, which is consistent with the experimental result. The maximum output power and slope efficiency achieved were 1266 mW and 24.3% in CW mode, which increased by 39.3% and 12.5%, respectively, compared with unbonded Er:LuYSGG crystal. The laser wavelength location was at 2797.6 nm, and the power fluctuation was about 5.1%. Moreover, the beam quality factors Mx2 and My2 improved to 1.33 and 1.42 from 1.78 and 1.83, respectively. The results suggested that an LD end-pumped LuYSGG/Er:LuYSGG composite crystal with a high beam quality can be applied as a seed source in the mid-infrared (MIR) multi-stage amplification laser apparatus. [ABSTRACT FROM AUTHOR]

• Cr,Er:YSGG crystal with thermal bonding and concave end-face is pumped by Xenon lamp. • Thermal distribution simulation shows thermal bonding can improve heat dissipation capability. • Thermal focal length indicates concave end-face can compensate thermal lens effect. • High single pulse energy of 3.48 J obtained for the concave thermal bonding Cr,Er:YSGG at 5 Hz. • Maximum energy of 1.155 J and slope efficiency of 3.65 % are achieved for the concave thermal bonding Cr,Er:YSGG at 20 Hz. We demonstrate the influence of thermal bonding and concave end-face on the 2.79 μm laser performance of Cr,Er:YSGG crystal. The simulation results of temperature distribution suggest that the two pure YSGG crystals bonded on the Cr,Er:YSGG as end-caps are beneficial to improve the heat dissipation capability. The experimental results of thermal focal length show that the thermal effects of un-bonding, planar thermal bonding, and concave thermal bonding Cr,Er:YSGG crystals are in descending tendency. The maximum output energies and slope efficiencies for concave thermal bonding Cr,Er:YSGG crystal are 3.480 J, 3.33 %@5 Hz; 2.126 J, 3.65 %@10 Hz; 1.384 J, 3.63 %@15 Hz; 1.155 J, 3.65 %@20 Hz, respectively, and the beam quality factors M x 2/ M y 2 are determined to be 7.68/8.63. The result is much better than the previous work, indicating that the xenon lamp pumped concave thermal bonding Cr,Er:YSGG crystal is a promising method to realize high energy laser output. All the results indicate that the thermal bonding and concave end-faces are promising methods to reduce the thermal effect and improve the laser performance of Cr,Er:YSGG crystal pumped by the xenon lamp. [ABSTRACT FROM AUTHOR]

We demonstrate the temperature distribution and 2.79 μ m laser performance in a high-quality Er:YSGG single crystal fiber (SCF) with size of Φ 0.85 × 8 mm3 for the first time. Compared with 2 × 2 × 8 mm3 Er:YSGG bulk crystal, the simulation results show that the center maximum temperature of Er:YSGG SCF is much lower, and the temperature rising and total thermal deformation are evidently reduced, indicating that the SCF possesses more efficient thermal dissipation. Under 970 nm laser diode pumping, a maximum output power of 636 mW with slope efficiency of 20.2% is realized. More importantly, a high beam quality factors M x 2 / M y 2 of 1.28/1.29 is obtained, which is close to the fundamental TEM 00 mode, suggesting that the Er:YSGG SCF can act as a promising candidate for mid-infrared laser seed source. • Er:YSGG single-crystal fiber(SCF) with a diameter of Φ 0.85 mm is prepared successfully. • Temperature distribution simulation shows the SCF possesses more efficient thermal dissipation. • 2794 nm CW laser power of 636 mW and beam quality factor M x 2 / M y 2 of 1.28/1.29 are achieved. • Er:YSGG SCF laser is a promising candidate for mid-infrared laser seed source. [ABSTRACT FROM AUTHOR]