Search

Ge is a candidate for replacing Si, especially for pMOSFETs, because of its high hole mobility. For Si-pMOSFETs, negative-bias temperature instabilities (NBTI) limit their lifetime. There is little information available for the NBTI of Ge-pMOSFETs with Ge/GeO2/Al2O3 stack. The objective of this paper is to provide this information and compare the NBTI of Ge- and Si-pMOSFETs. New findings include: 1) the time exponent varies with stress biases/field when measured by either the conventional slow dc or pulse I-V technique, making the conventional Vg -accelerated method for predicting the lifetime of Si-pMOSFETs inapplicable to Ge-pMOSFETs used in this paper; 2) the NBTI is dominated by positive charges (PCs) in dielectric, rather than generated interface states; 3) the PC in Ge/GeO2/Al2O3 can be fully annealed at 150 ^\circC ; and 4) the defect losses reported for Si sample were not observed. For the first time, we report that the PCs in oxides on Ge and Si behave differently, and to explain the difference, an energy-switching model is proposed for hole traps in Ge-MOSEFTs: their energy levels have a spread below the edge of valence band, i.e., Ev , when neutral, lift well above Ev after charging, and return below Ev following neutralization. [ABSTRACT FROM PUBLISHER]

Defects in gate oxide cause breakdown and shorten device lifetime. Early works mainly focused on generation process that converts a precursor into a charged defect. Although it can be neutralized through “recovery,” the defect is still there and will recharge when resuming stress. Recently, we have shown that this is not always the case and some defects can be lost, but a detailed investigation is missing. The central objective of this work is to accurately define and extract the loss, separate it from slowdown, and evaluate their enhancement of device lifetime. Loss is defined as elimination of defects, while slowdown means that recharging a “hardened” precursor takes longer than charging a fresh one. Clear evidences show that losses originate from permanent components, i.e., generated interface states and antineutralization positive charges, while slowdown occurs to both permanent and recoverable components. Loss is thermally accelerated, but slowdown of recoverable component is not. This improved understanding adds slowdown and losses to the existing framework for defects. For the first time, we report that the losses and slowdown enhance device lifetime by a factor of 2.6–4.3, for an allowed threshold voltage shift of 20–45 mV. [ABSTRACT FROM AUTHOR]

Low-power circuits are important for many applications, such as Internet of Things. Device variations and fluctuations are challenging their design. Random telegraph noise (RTN) is an important source of fluctuation. To verify a design by simulation, one needs assessing the impact of fluctuation in both driving current $\Delta {I}_{d}$ and threshold voltage $\Delta {V}_{\textsf {th}}$. Many early works, however, only measured RTN-induced $\Delta {I}_{d}$. $\Delta {V}_{\textsf {th}}$ was not directly measured because of two difficulties: its average value is low and it is highly dynamic. Early works often estimated $\Delta {V}_{\textsf {th}}$ from $\Delta {I}_{d}/{g}_{m}$ (${V}_{g} = {V}_{\textit {dd}}$), where ${g}_{m}$ is the transconductance, without giving its accuracy. The objective of this paper is to develop a new Trigger-When-Charged (TWC) technique for directly measuring the RTN-induced $\Delta {V}_{\textsf {th}}$. By triggering the measurement only when a trap is charged, measurement accuracy is substantially improved. It is found that there is a poor correlation between $\Delta {I}_{d}/{g}_{m}$ (${V}_{g} = {V}_{\textit {dd}}$) and the directly measured $\Delta {V}_{\textsf {th}}$ (${V}_{g} = {V}_{\textsf {th}}$). The former is twice of the latter on average. The origin for this difference is analyzed. For the first time, the TWC is applied to evaluate device-to-device variations of the directly measured RTN-induced $\Delta {V}_{\textsf {th}}$ without selecting devices. [ABSTRACT FROM AUTHOR]

\Al2\O3 high- \kappa stack is a strong candidate as the dielectric layer in Flash memory cells for technology generations beyond sub-20 nm. In this paper, the cause of abnormal VTH/VFB shift at low operating electric fields is investigated, i.e., VTH/VFB reduces at low positive gate biases and increases at low negative gate biases. It is found that this instability does not originate from the electrons trapping/detrapping from the gate nor from the dielectric relaxation. For the first time, extensive experimental evidences show that this shift is caused by as-grown mobile charges in \Al2\O3 layers generated by postdeposition annealing at 1000 ^\circ\C or above. Its impacts on program/erase windows and read/pass disturbance in Flash memory cells are also evaluated. [ABSTRACT FROM PUBLISHER]

Negative bias temperature instability (NBTI)-generated defects (GDs) have been widely observed and known to play an important role in device’s lifetime. However, its characterization and modeling in nanoscaled devices is a challenge due to their stochastic nature. The objective of this paper is to develop a fast and accurate technique for characterizing the statistical properties of NBTI aging, which can be completed in one day and thus reduce test time significantly. The fast speed comes from replacing the conventional constant voltage stress by the voltage step stress (VSS), while the accuracy comes from capturing the GDs without recovery. The key advances are twofold: first, we demonstrate that this VSS-GD technique is applicable for nanoscaled devices; second, we verify the accuracy of the statistical model based on the parameters extracted from this technique against independently measured data. The proposed method provides an effective solution for GD evaluation, as required when qualifying a CMOS process. [ABSTRACT FROM PUBLISHER]

To predict the negative bias temperature instability (NBTI) toward the end of pMOSFETs’ ten years lifetime, power-law-based extrapolation is the industrial standard method. The prediction accuracy crucially depends on the accuracy of time exponents, n. n reported by early work spreads in a wide range and varies with measurement conditions, which can lead to unacceptable errors when extrapolated to ten years. The objective of this paper is to find how to make n extraction independent of measurement conditions. After removing the contribution from as-grown hole traps, a new method is proposed to capture the generated defects (GDs) in their entirety. n extracted by this method is around 0.2 and insensitive to measurement conditions for the four fabrication processes we tested. The model based on this method is verified by comparing its prediction with measurements. Under ac operation, the model predicts that the GD can contribute to ~90% of NBTI at ten years. [ABSTRACT FROM PUBLISHER]