Search

A self-heated double Wheatstone bridge configuration for a 2-D wind sensor is presented. Without a central heating element, eight thermistors are symmetrically arranged in two orthogonal directions, and four of them in each direction make up a Wheatstone bridge. The eight thermistors simultaneously act as the heating sources and temperature sensing elements. By applying the constant current supply to the bridge, the terminal voltage across the bridge and the bridge output voltage are utilized to measure the wind speed and direction, respectively. The 2-D wind sensor has been simulated numerically and fabricated directly on the ceramic substrate. Experiments demonstrate that the measured speed varies from 0 to 40 m/s with an error less than ±2 m/s while the measured direction spans from 0° to 360° with an error less than ±3° after calibration. The double bridge configuration greatly simplifies the measurement and control circuits for the 2-D wind sensor. [2018-0171] [ABSTRACT FROM AUTHOR]

This paper introduces a novel sensing element scheme to improve the accuracy of 2-D micromachined thermal wind sensor. The sensing element consists of eight heaters and eight thermistors placed on ceramic substrate. The octagon-arranged sixteen resistors are divided into two wind sensing groups, cross-type group and saltire-type group. These two groups monitor wind independently, and the final measured wind speed and direction are extracted from the measurement results of the two groups. Based on this octagon-sensing design, the sensor achieves higher accuracy for wind measurement, which is verified by the experiment. The results show that for the wind speed up to 33 m/s, the sensor has a measurement error less than ±1%, and the airflow direction over the full range of 360° is determined with a maximum error of ±1.5°. [2018-0045] [ABSTRACT FROM AUTHOR]

In this paper, the effect of insulation trenches on micromachined silicon thermal wind sensors is explored. The sensor is composed of a central heater and four thermistors. It measures wind speed and direction through detecting the airflow-induced temperature difference on the chip surface. Three different forms of insulation trenches are designed and fabricated to explore their effects on the performance of wind sensors. The experimental results show that when the sensors work in constant voltage mode, the center and arch trenches enhance the performance, while the arch trenches have the most significant effect on the sensitivity improvement. Moreover, all the three kinds of insulation trenches reduce the power consumption for the sensors operated in constant temperature difference mode. The insulation trench design in this paper can provide a valuable reference for the design and fabrication of micromachined silicon thermal wind sensors. [ABSTRACT FROM PUBLISHER]

This paper presents the design, fabrication, and performance of a micromachined silicon thermal wind sensor with improved sensitivity. Deep reactive ion etching (DRIE) trenches are fabricated between the heater and the thermistors to suppress the lateral heat conduction in the chip. In addition, eight thermistors symmetrically arranged in four directions around the heater form two Wheatstone full-bridges, resulting in about 50% increase of the sensitivity with respect to four thermistors. Based on these two methods, the sensitivity of the micromachined silicon thermal wind sensor is improved remarkably, which is verified by the experiment. The results show that the measurement wind speed range is up to 33 m/s in constant voltage (CV) mode with the initial heating power of 256 mW. The sensitivity is measured to be 29.37 mV/ms−1 at the wind speed 3.3 m/s, achieving improvement of about 226%, compared with that of the traditional wind sensor. Wind direction measurement results show that airflow direction over the full range of 360° is determined with an accuracy of ±5°. [2017-0052] [ABSTRACT FROM AUTHOR]