Search

We have studied the liquid-like response of the surface of vapor-deposited glassy films of polystyrene to the introduction of gold nanoparticles on the surface. The build-up of polymer material was measured as a function of time and temperature for both as-deposited films, as well as films that have been rejuvenated to become normal glasses cooled from the equilibrium liquid. The temporal evolution of the surface profile is well described by the characteristic power law of capillary-driven surface flows. In all cases, the surface evolution of the as-deposited films and the rejuvenated films is enhanced compared to bulk and is not easily distinguishable from each other. The temperature dependence of the measured relaxation times determined from the surface evolution is found to be quantitatively comparable to similar studies for high molecular weight spincast polystyrene. Comparisons to numerical solutions of the glassy thin film equation provide quantitative estimates of the surface mobility. For temperatures sufficiently close to the glass-transition temperature, particle embedding is also measured and used as a probe of bulk dynamics, and, in particular, bulk viscosity. [ABSTRACT FROM AUTHOR]

Inspired by geological structures formed by magmatic intrusions that deform the Earth's crust, we investigate the elastohydrodynamic growth of a viscoplastic blister under an elastic sheet resting on a prewetted substrate. By combining experiments, scaling analysis and numerical simulations, we reveal new regimes for the elastoviscoplastic growth dynamics of the blister. The blister height and its apparent radius grow as $h(0,t) \sim t^{5/9}$ and $R(t) \sim t^{2/9}$ if the fluid pressure is set by bending of the sheet, and as $h(0,t) \sim t^{5/13}$ and $R(t) \sim t^{4/13}$ if the fluid pressure is set by stretching of the sheet. A plug-like flow inside the blister dictates its dynamics, whereas the blister takes a self-similar shape given by a balance of the fluid's yield stress and the pressure gradient induced by the deformation of the elastic sheet. [ABSTRACT FROM AUTHOR]

We study the spreading of droplets in a near-critical phase-separated liquid mixture, using a combination of experiments, lubrication theory and finite-element numerical simulations. The classical Tanner's law describing the spreading of viscous droplets is robustly verified when the critical temperature is neared. Furthermore, the microscopic cut-off length scale emerging in this law is obtained as a single free parameter for each given temperature. In total-wetting conditions, this length is interpreted as the thickness of the thin precursor film present ahead of the apparent contact line. The collapse of the different evolutions onto a single Tanner-like master curve demonstrates the universality of viscous spreading before entering in the fluctuation-dominated regime. Finally, our results reveal a counter-intuitive and sharp thinning of the precursor film when approaching the critical temperature, which is attributed to the vanishing spreading parameter at the critical point. Tanner's law describes the spreading dynamics of droplets made of Newtonian viscous fluids. Here, the authors demonstrate that this law remains valid for phase-separated binary liquids close to their critical point, and thus for all the associated universality class. [ABSTRACT FROM AUTHOR]

Adhesive contact between a thin elastic sheet and a substrate arises in a range of biological, physical and technological applications. By considering the dynamics of this process that naturally couples fluid flow, long-wavelength elastic deformations and microscopic adhesion, we analyse a sixth-order thin-film equation for the short-time dynamics of the onset of adhesion and the long-time dynamics of a steadily propagating adhesion front. Numerical solutions corroborate scaling laws and asymptotic analyses for the characteristic waiting time for adhesive contact and for the speed of the adhesion front. A similarity analysis of the governing partial differential equation further allows us to determine the shape of a fluid-filled blister ahead of the adhesion front. Finally, our analysis reveals a near-singular behaviour at the moving elastohydrodynamic contact line with an effective boundary condition that might be useful in other related problems. [ABSTRACT FROM AUTHOR]

Gravitational settling of a droplet in air onto a soft substrate is a ubiquitous event relevant to many natural processes and engineering applications. We study this phenomenon by developing a three-phase lubrication model of droplet settling onto a solid substrate coated by a thin soft layer represented by a viscous film, an elastic compressible layer and an elastic sheet supported by a viscous film. By combining scaling analysis, analytical methods and numerical simulations we elucidate how the resulting droplet dynamics is affected by the nature of the soft layer. We show that these soft layers can significantly affect the droplet shape during gravitational settling. When there is a linear response of the deformations of the soft layer, the air layer takes longer to drain as compared with the case of a droplet settling onto a rigid substrate. Our results provide new insight into the coupled interactions between droplets and solids coated by a thin film of a soft material. [ABSTRACT FROM AUTHOR]

We study theoretically and numerically the bending-driven levelling of thin viscous films within the lubrication approximation. We derive Green's function of the linearized thin-film equation and further show that it represents a universal self-similar attractor at long times. As such, the rescaled perturbation of the film profile converges in time towards the rescaled Green's function, for any summable initial perturbation profile. In addition, for stepped axisymmetric initial conditions, we demonstrate the existence of another, short-term and one-dimensional-like self-similar regime. We also characterize the convergence time towards the long-term universal attractor in terms of the relevant physical and geometrical parameters, and provide the local hydrodynamic fields and global elastic energy in the universal regime as functions of time. Finally, we extend our analysis to the nonlinear thin-film equation through numerical simulations. [ABSTRACT FROM AUTHOR]

We study the dynamic wetting of a self-propelled viscous droplet using the time-dependent lubrication equation on a conical-shaped substrate for different cone radii, cone angles and slip lengths. The droplet velocity is found to increase with the cone angle and the slip length, but decrease with the cone radius. We show that a film is formed at the receding part of the droplet, much like the classical Landau–Levich–Derjaguin film. The film thickness $h_f$ is found to decrease with the slip length $\lambda$. By using the approach of matching asymptotic profiles in the film region and the quasi-static droplet, we obtain the same film thickness as the results from the lubrication approach for all slip lengths. We identify two scaling laws for the asymptotic regimes: $h_fh''_o \sim Ca^{2/3}$ for $\lambda \ll h_f$ and $h_f h''^{3}_o\sim (Ca/\lambda)^2$ for $\lambda \gg h_f$ ; here, $1/h''_o$ is a characteristic length at the receding contact line and $Ca$ is the capillary number. We compare the position and the shape of the droplet predicted from our continuum theory with molecular dynamics simulations, which are in close agreement. Our results show that manipulating the droplet size, the cone angle and the slip length provides different schemes for guiding droplet motion and coating the substrate with a film. [ABSTRACT FROM AUTHOR]

If a droplet smaller than the capillary length is placed on a substrate with a conical shape, it spreads by itself in the direction of growing fibre radius. We describe this capillary spreading dynamics by developing a lubrication flow approximation on a cone and by using the perturbation method of matched asymptotic expansions. Our results show that the droplet appears to adopt a quasi-static shape and the predictions of the droplet shape and the spreading velocity from the two mathematical models are in excellent agreement. At the contact line regions, a large pressure gradient is generated by the mismatch between the equilibrium contact angle and the apparent contact angle that maintains the viscous flow. It is the conical shape of the substrate that breaks the front/rear droplet symmetry in terms of the apparent contact angle, which is larger at the thicker part of the cone than at its thinner part. Consequently, the droplet is predicted to move from the cone tip to its base, consistent with experimental observations. [ABSTRACT FROM AUTHOR]

In this theoretical and numerical study, we show how spatially extended fluctuations can influence and dominate the dynamics of a fluid filled elastic blister as it deforms onto a pre-wetted solid substrate. To describe the blister dynamics, we develop a stochastic elastohydrodynamic framework that couples the viscous flow, the elastic bending of the interface and the noise from the environment. We deploy a scaling analysis to find the elastohydrodynamic spreading law ~ R̂ ť1/11, where OR is the spreading radius and Ot is time, a direct analogue to the capillary spreading of drops, while the inclusion of noise in our model highlights that the dynamics speeds up significantly ~ R̂ ť1/6 as local changes in curvature at the spreading front enhance the peeling of the elastic interface from the substrate. These fluctuations have a pronounced influence on the shape of the deforming blister and lead to the formation of a precursor film similar to a perfectly wetting droplet. Moreover, our analysis identifies a distinct criterion for the transition between the deterministic and the stochastic spreading regime, which is further illustrated by numerical simulations. [ABSTRACT FROM AUTHOR]