Search

Highlights: The (001)-oriented ferromagnetic La0.67Sr0.33MnO3 films are stuck onto the (011)-oriented ferroelectric single-crystal 0.7Pb(Mg1/3Nb2/3)O3–0.3PbTiO3 substrate with 0° and 45° twist angle. By applying a 7.2 kV cm−1 electric field, the coexistence of uniaxial and fourfold in-plane magnetic anisotropy is observed in 45° Sample, while a typical uniaxial anisotropy is found in 0° Sample. Manipulating strain mode and degree that can be applied to epitaxial complex oxide thin films have been a cornerstone of strain engineering. In recent years, lift-off and transfer technology of the epitaxial oxide thin films have been developed that enabled the integration of heterostructures without the limitation of material types and crystal orientations. Moreover, twisted integration would provide a more interesting strategy in artificial magnetoelectric heterostructures. A specific twist angle between the ferroelectric and ferromagnetic oxide layers corresponds to the distinct strain regulation modes in the magnetoelectric coupling process, which could provide some insight in to the physical phenomena. In this work, the La0.67Sr0.33MnO3 (001)/0.7Pb(Mg1/3Nb2/3)O3–0.3PbTiO3 (011) (LSMO/PMN-PT) heterostructures with 45º and 0º twist angles were assembled via water-etching and transfer process. The transferred LSMO films exhibit a fourfold magnetic anisotropy with easy axis along LSMO < 110 >. A coexistence of uniaxial and fourfold magnetic anisotropy with LSMO [110] easy axis is observed for the 45° Sample by applying a 7.2 kV cm−1 electrical field, significantly different from a uniaxial anisotropy with LSMO [100] easy axis for the 0° Sample. The fitting of the ferromagnetic resonance field reveals that the strain coupling generated by the 45° twist angle causes different lattice distortion of LSMO, thereby enhancing both the fourfold and uniaxial anisotropy. This work confirms the twisting degrees of freedom for magnetoelectric coupling and opens opportunities for fabricating artificial magnetoelectric heterostructures. [ABSTRACT FROM AUTHOR]

The electron‐phonon interaction is known as one of the major mechanisms determining electrical and thermal properties. In particular, it alters the carrier transport behaviors and sets fundamental limits to carrier mobility. Establishing how electrons interact with phonons and the resulting impact on the carrier transport property is significant for the development of high‐efficiency electronic devices. Here, carrier transport behavior mediated by the electron‐phonon coupling in BiFeO3 epitaxial thin films is directly observed. Acoustic phonons are generated by the inverse piezoelectric effect and coupled with photocarriers. Via the electron‐phonon coupling, doughnut shape carrier distribution has been observed due to the coupling between hot carriers and phonons. The hot carrier quasi‐ballistic transport length can reach 340 nm within 1 ps. The results suggest an effective approach to investigating the effects of electron‐phonon interactions with temporal and spatial resolutions, which is of great importance for designing and improving electronic devices. [ABSTRACT FROM AUTHOR]

Zn/Al co-doped nickel ferrites (NZAFO) with ultralow magnetic damping and large magnetostriction are critically needed for use in tunable spintronic devices and dissipationless quantum computation. However, the growth of epitaxial NZAFO thin films with optimized properties is difficult due to their tendency to form anti-site defects and antiphase boundaries, even on isostructural spinel substrate. Here, growth temperature-dependent ferromagnetic resonance (FMR) and magnetization have been systematically investigated. The saturate magnetization and damping linewidth have decreased from 114 to 70 emu/cc and 321 to 12 Oe as deposition temperature increased from 500 °C to 650 °C, respectively. With further optimization of the film thickness, a minimum FMR linewidth of 7.5 Oe has been observed, only 1.74% of that of bulk form NZAFO materials. Further increasing of deposition temperature to 700 °C results in a dramatic increase in the magnetic coercive field and damping linewidth. The magnetostriction and magnetocrystalline anisotropy are relatively stable in a large temperature range. The strong dependence between magnetic properties and the deposition temperature has been explained in terms of cation redistribution and evaporation. The insulating ferrimagnetic NZAFO with ultralow microwave loss and strain tunable static and dynamic magnetic properties serve as a promising candidate to be used in various tunable electronic devices. [ABSTRACT FROM AUTHOR]

Epitaxial BiEuFeO (BEFO) thin films are deposited on Nb-doped SrTiO (NSTO) substrates by pulsed laser deposition to fabricate the Pt/BEFO/NSTO (001) heterostructures. These heterostructures possess bipolar resistive switching, where the resistances versus writing voltage exhibits a distinct hysteresis loop and a memristive behavior with good retention and anti-fatigue characteristics. The local resistive switching is confirmed by the conductive atomic force microscopy (C-AFM), suggesting the possibility to scale down the memory cell size. The observed memristive behavior could be attributed to the ferroelectric polarization effect, which modulates the height of potential barrier and width of depletion region at the BEFO/NSTO interface. The continuously tunable resistive switching behavior could be useful to achieve non-volatile, high-density, multilevel random access memory with low energy consumption. [ABSTRACT FROM AUTHOR]

Rayleigh analysis has been used to investigate the temperature dependence of the dielectric response of relaxor ferroelectric Pb0.92La0.08Zr0.52Ti0.48O3 films grown on platinized silicon substrates by chemical solution deposition. The irreversible contribution to dielectric permittivity maximizes at 50 °C and decreases with further temperature increase; while the intrinsic/reversible contribution is weakly dependent on temperature. The relaxor ferroelectric transition temperature Tm increases from 160 °C to 172 °C when the frequency increases from 1 kHz to 100 kHz. The dielectric nonlinearity decreases with temperature: falling from 0.012 cm/kV at room temperature to 0.005 cm/kV at 225 °C in tests at 1 kHz. [ABSTRACT FROM AUTHOR]

-site Ce and B-site Zr codoped BiCeFeZrO (BCFZ) thin films with different compositions were successfully prepared on the Pt/Ti/SiO/Si substrates by chemical solution deposition. The influence of the A-site Ce and B-site Zr codoping on the structure, surface morphology, electrical and magnetic properties of BFO films were investigated, respectively. The comparative study suggested that the A-site Ce doping with various contents have notable influences on the electrical properties of the BFO films, while the B-site Zr doping with different contents affect mainly the magnetic properties of the BFO films. Compared with the other BCFZ films studied here, the BiCeFeZrO film showed the lowest dielectric loss and leakage current density, a well-squared P- E loop and fatigue-free characteristics as well as the strong magnetization. [ABSTRACT FROM AUTHOR]

Pure BiFeO3 (BFO), Eu doped BFO (BEF), and Nd doped BFO (BNF) multiferroic films were prepared by pulsed laser deposition on Pt/Ti/SiO2/Si substrates. XRD analysis revealed that the films had the rhombohedral structure with doping-induced lattice distortion. The Eu and Nd doping significantly improved the dielectric, ferroelectric, and ferromagnetic properties of the BFO films. Saturated hysteresis loops were observed in BEF and BNF films with remnant polarization of 37 μC/cm2 and 60 μC/cm2, respectively. The magnetization was demonstrated with remnant magnetization of 0.10 emu/cm3 and 0.60 emu/cm3 for the BEF and BNF films, respectively. The improvements and mechanism of different element doping on the properties of the BFO films were discussed. [ABSTRACT FROM AUTHOR]

Magnonics or spin waves have the potential to serve as the carrier for future information communication. A controllable spin wave resonance (SWR) device is demonstrated in a Au/[DEME]+[TFSI]−/LSMO/STO capacitor heterostructure, which could be regulated by ionic liquid gating (ILG) method. The SWR critical angle φC, excitation position to perform uniform precession, is shifted in a reversible manner (thus recording "off" and "on") with +1.5 V gating voltage (Vg), measured by quantitative angular dependent electron spin resonance (ESR) spectroscopy. Based on the modified Puszkarski's surface inhomogeneity model, the ILG control SWR at low Vg (Vg < 1.5 V) can be explained by a charge‐doping‐induced effective surface magnetic anisotropy change. Applying a higher Vg (Vg > 1.5 V) enhances the surface mode SWR and gradually diminishes the body mode SWR. Oxygen vacancies generate at higher Vg (Vg > 1.5 V) resulting in the modulation of superexchange between the Mn ions, evidenced by X‐ray photoelectron spectroscopy and secondary ion mass spectroscopy characterization. This ILG control SWR presents a solution for energy efficient and low‐voltage control of magnonics and spin wave devices. [ABSTRACT FROM AUTHOR]

The electron‐phonon interaction is known as one of the major mechanisms determining electrical and thermal properties. In particular, it alters the carrier transport behaviors and sets fundamental limits to carrier mobility. Establishing how electrons interact with phonons and the resulting impact on the carrier transport property is significant for the development of high‐efficiency electronic devices. Here, carrier transport behavior mediated by the electron‐phonon coupling in BiFeO3 epitaxial thin films is directly observed. Acoustic phonons are generated by the inverse piezoelectric effect and coupled with photocarriers. Via the electron‐phonon coupling, doughnut shape carrier distribution has been observed due to the coupling between hot carriers and phonons. The hot carrier quasi‐ballistic transport length can reach 340 nm within 1 ps. The results suggest an effective approach to investigating the effects of electron‐phonon interactions with temporal and spatial resolutions, which is of great importance for designing and improving electronic devices. [ABSTRACT FROM AUTHOR]

A TiO2 thin film was deposited on a Nb : SrTiO3 substrate by pulsed laser deposition to form an Ag/TiO2/Nb : SrTiO3/In device. The bipolar resistive switching (RS) effect of this device was investigated. The current–voltage characteristics exhibited pronounced and stable bipolar RS features. The device could be switched to a low resistance state (LRS) at forward voltage and returned to a high resistance state (HRS) at reverse voltage, and the RS ratio RHRS/RLRS reached up to 2 × 103 at a read voltage of −0.5 V. Moreover, the RS ratio could be adjusted by changing the maximum value of the forward or reverse voltage, which shows promise for multilevel memories. These results are discussed by considering carrier injection-trapped/detrapped process of the heterostructure and show high potential for nonvolatile memory applications. [ABSTRACT FROM AUTHOR]

We incorporated a ≈5-nm-thick MnO x insertion layer in the middle of a ≈1.38-μm-thick Pb 0.92 La 0.08 Zr 0.52 Ti 0.48 O 3 (PLZT) film grown by a modified sol–gel process and measured the dielectric and ferroelectric properties of PLZT films with and without MnO x insertion layer. By incorporation of the MnO x layer, residual stress was reduced from ≈350 MPa to ≈125 MPa, dielectric permittivity decreased from ≈1300 to ≈950, while dielectric loss increased from ≈0.04 to ≈0.07 as measured at 10 kHz. Also, remanent polarization increased from ≈9.1 μC/cm 2 to ≈11.7 μC/cm 2 , coercive field increased from ≈28.7 kV/cm to ≈40.3 kV/cm, and internal bias field from ≈3 kV/cm to ≈14 kV/cm. We have observed decreased irreversible Rayleigh coefficient and dielectric nonlinearity on samples with MnO x insertion layer. These changes in properties are attributable to Mn cation doping as acceptors near the MnO x /PLZT interface, which forms oxygen vacancies and defect induced dipoles like 2 M n ′ T i − V O • • (or M n ″ T i − V O • • ), acting effectively as pinning centers to hinder domain wall movement. [ABSTRACT FROM AUTHOR]

Abstract: Ba-doped BiFeO3 thin films were prepared on Pt/TiO2/SiO2/Si (100) substrate at various oxygen pressures by pulsed laser deposition. The influences of oxygen pressure on the crystalline structures, magnetic and electrical properties of these films were studied. Studies showed that the oxygen vacancy content and accordingly the leakage current density of the films decreased with the increase of the oxygen pressure, and the concentration of the Fe2+ increased with the decrease of the oxygen pressure. Strong ferromagnetism was observed in these films. The magnetization of the films increased with the decrease of the oxygen pressure and the largest remnant magnetization of 2.46×104 A/m was obtained at an oxygen pressure of 0.7Pa. This enhancement of the magnetization can be attributed to the increase of the Fe2+ concentration which may be related closely to the increase of the oxygen vacancy in the films. [Copyright &y& Elsevier]