Search

In order to further improve the dimensional accuracy of micromilled thin walls with high aspect ratios, the machining process should be actively controlled. A device for active cutting force measurement and cutting parameter compensation is developed to realize the real-time measurement of radial cutting forces and compensation of radial cutting parameters in thin wall cutting process. Firstly, a mathematical model is established to calculate the deformation and cutting force of thin walls based on the cantilever beam deformation theory. The thin wall deformation in the cutting process is estimated by measuring the cutting force. Then, the obtained incremental thin wall deformation is to be compared with the compensation threshold, which is set at 0.5 μm. If the value of the incremental deformation is less than 0.5 μm, compensation will not be processed. Otherwise, the incremental deformation is used as the compensation value for iterative compensation, until the incremental deformation of the thin wall is less than 0.5 μm. At last, a contrast experiment is carried out. The experimental results show that the introduced device and compensation method are feasible. Machining quality of the thin wall has been obviously improved in dimension precision after the cutting parameter compensations.

In order to improve the machining quality and reduce the dimensional errors of micro high-aspect-ratio straight thin walls, the on-line cutting parameter compensation device has been introduced and corresponding micromilling processes have been investigated. Layered milling strategies for the micromilling of thin walls have been modeled and simulated for thin walls with different thicknesses based on the finite element method. The radial cutting parameters compensation method is adopted to compensate the thin wall deformation by raising the radial cutting parameters since the thin wall deformation make the actual radial cutting parameters smaller than nominal ones. The experimental results show that the dimensional errors of the thin wall have been significantly reduced after the radial cutting parameter compensation. The average relative dimensional error is reduced from 6.9% to 2.0%. Moreover, the fabricated thin walls keep good shape formation. The reduction of the thin wall dimensional error shows that the simulation results are reliable, which has important guiding significance for the improvement of thin wall machining quality, especially the improvement of dimensional accuracy. The experimental results show that the developed device and the machining strategy can effectively improve the micromilling quality of thin walls.