Search

Combustion through detonation marks an important leap in efficiency over standard deflagration methods. This research introduces a Pulsed Detonation Combustor (PDC) model that uses Hydrogen as fuel and Oxygen as an oxidizer, specifically targeting carbon-free combustion efforts. The PDC aerodynamic features boost operating cycle frequency and facilitate Deflagration-to-Detonation Transition (DDT) within distances less than 200 mm by means of Hartmann–Sprenger resonators and cross-flow fuel/oxidizer injection. The achievement of quality mixing in a short-time filling process represents not only higher cycle operation but also enhanced performances. The scope of this paper is to assess the impact of different fuel injectors with different opening areas on the performances of the PDC. This assessment, expressed as a function of the Equivalence Ratio (ER), is conducted using two primary methods. Instantaneous static pressures are recorded and processed to extract the maximum and average cycle pressure and characterize the pressure augmentation. Thrust measurements obtained using a load cell are averaged over the detonation cycle to calculate the time-averaged thrust. The specific impulse is subsequently determined based on these thrust measurements and the corresponding mass flow data. [ABSTRACT FROM AUTHOR]

Detonation combustion represents a significant advancement in efficiency over traditional deflagration methods. This paper presents a Pulsed Detonation Combustor (PDC) model that is designed with an aerodynamic mixing chamber featuring Hartmann–Sprenger resonators and crossflow injection. This design enhances operational cycle frequency and enables sustained detonation over short distances (below 200 mm). The PDC's performance was evaluated through a comprehensive full-factorial experimental campaign, incorporating four factors with four discrete levels each. Testing was conducted using both hydrogen/air and hydrogen/oxygen mixtures, highlighting the PDC's potential as a carbon-free combustion chamber suitable for both air-breathing and space-based propulsion systems. One advantage is the versatility of our PDC breadboard, which lies in its applicability to both terrestrial and in-space applications, such as interplanetary travel or trajectory corrections. Thrust measurements were recorded using a load cell and time-averaged thrust levels were determined over the detonation cycle and are reported herein, together with the specific impulse. The results underscore the PDC's promise as an efficient propulsion technology for future aerospace applications. [ABSTRACT FROM AUTHOR]