Search

A novel circuit with the better performance for the inductive pulsed power supplies in the electromagnetic launch system is proposed in this paper, namely, the meat grinder with capacitive pulse forming unit (CPFU). Its working process is qualitatively analyzed stage by stage. Its practical feasibility is verified through a 7.5-kJ experiment. From the perspectives of circuit structure and working principle, this circuit can be regarded as the combination of a meat grinder and a CPFU. Compared with its preceding circuits, this circuit possesses following advantages: 1) the self-recovery of the capacitor precharged voltage can easily be achieved, which is conducive to continuous operations of the whole circuit and 2) the waveforms of the inductor currents contain no capacitive components, which can promote the energy storage density of the inductors. [ABSTRACT FROM PUBLISHER]

The meat grinder is a basic circuit for inductive pulsed-power supply (IPPS). Based on meat grinder, the Institute of Advanced Technology proposed a circuit called the slow transfer of energy through capacitive hybrid (STRETCH) meat grinder, in which an Integrated Gate Commutated Thyristors (IGCT) is selected as the main switch. Tsinghua University proposed the STRETCH meat grinder with inverse current commutation with semiconductor devices (ICCOS) in which the main switch is replaced by a thyristor and the ICCOS subcircuit is introduced to turn off the main switch. To reduce the opening switch voltage and increase the current turning-off capacity for IPPS, this paper presents a novel circuit topology named the meat grinder with self-charged capacitor and thyristors (SECTs). The key idea of the SECT topology is to turn off the primary current by the energy transfer capacitor, which is precharged. The meat grinder with SECT has larger capacity than the STRETCH meat grinder because it replaces the IGCT with a thyristor and is simpler than the STRETCH meat grinder with ICCOS because it only needs one capacitor. The suggested circuit is more suitable for IPPS module with high energy density. Simulation and experiment have been carried out to validate the circuit. [ABSTRACT FROM PUBLISHER]

Because it possesses higher current turn-off capability, the inverse current commutation with semiconductor devices (ICCOS) is a better option for the opening switch of an inductive pulsed power supply than the integrated gate commutated thyristor. This paper investigates the counter-current capacitor, which is the key component that determines the turn-off result and the volume of the counter-current branch. The major contributions of this paper include the following: 1) deriving an analytical expression for the minimum precharged capacitor voltage that can reliably turn off the main switch; 2) verifying this expression through a series of experiments within a current range of 0 to 4000 A and an energy range of 0 to 50 kJ; 3) giving an approximate expression for the optimal capacitance that minimizes the precharged energy; and 4) investigating the variation trends of the optimal capacitance and the corresponding optimal precharged energy with varying inductor current. [ABSTRACT FROM PUBLISHER]

The meat grinder with SElf-charged Capacitor and Thyristors circuit is a novel circuit for inductive pulsed power supplies. The energy transfer capacitor is one of the key components in this circuit. And its capacitance C and the precharged voltage UC are key parameters worth investigating. The circuit working process and corresponding numerical calculation method are briefly introduced. And the method validity is verified through experiments. Then, the influences of $C$ and UC on circuit performance indices, i.e., the maximum voltage across the main switch $V_{{\mathrm{sopm}}} , the secondary current multiplication factor m2 , the ratio of the maximum capacitor energy over the inductor charging energy \eta C , and the self-recovery rate of the precharged capacitor voltage k\mathrm{UC} , are quantitatively analyzed through parameter sweep. Generally speaking, large C is conducive to lower $V_{{\mathrm{sopm}}} ; small m2 ; small C and low UC are conducive to lower \eta C and higher $k_{{\mathrm{UC}}}$ . Moreover, the analytical expression of $k_{{\mathrm{UC}}}$ is given. With C and UC elaborately selected, $k_{{\mathrm{UC}}}$ can achieve 100%. In addition, the balance relationship between two contradictory indices $V_{{\mathrm{sopm}}}$ and $k_{{\mathrm{UC}}}$ is obtained by solving a biobjective optimization problem and using the genetic algorithm. [ABSTRACT FROM AUTHOR]

With inherent strengths in energy density and power density, the inductive pulsed power supplies (IPPS) have become an attractive option for the power supplies in electromagnetic launch systems. The meat grinder circuits, including the slow transfer of energy through capacitive hybrid (STRETCH) meat grinder circuit, the STRETCH meat grinder with inverse current commutation with semiconductor devices circuit, and the meat grinder with self-charged capacitor and thyristors circuit, constitute one major branch among the IPPS circuits. This paper summarizes the fundamental research work and contributions of the meat grinder circuits from the perspectives of circuit improvements, performance analysis, inductor design, module collaboration, and efficiency promotion. The future directions of single IPPS module are higher energy level, larger energy density, and higher efficiency. [ABSTRACT FROM PUBLISHER]

Based on the urgent needs for modularization and miniaturization of the inductive pulsed power supply system, this paper proposes the conceptual design and comparison of 100-kJ inductive storage power modules including four circuit topologies, three of which are proposed in our previous researches. The four circuit topologies are the STRETCH meat grinder, the XRAM with STRETCH meat grinder unit, the XRAM with strongly coupled inductors, and the XRAM with magnetic flux compression effect. The maximum load current of each constructed module is set to be 50 kA and its pulsewidth is at least 5 ms, which are the same as the main electrical properties of an existing 100-kJ capacitive module. A comparative study on energy density among the constructed inductive modules and the existing capacitive module is carried out in depth. Results show that the inductive modules, considering the volume of semiconductor switches and their control circuits, have higher energy density than that of the capacitive module. Among four constructed inductive modules, the XRAM with strongly coupled inductors module has the highest inductive energy density, and the XRAM with magnetic flux compression effect module has relatively better comprehensive performance. This paper offers the theoretical analysis foundation for investigating the inductive pulse power supply with higher energy. [ABSTRACT FROM PUBLISHER]

Paralleled pulse-forming units (PFUs) with different triggering delays might be a paramagnetic way for generating flat-topped current wave for electromagnetic launch. Many researchers have reported that multiple capacitive storage PFUs were implemented such current waves in laboratories. However, due to its low energy density, the applications of the capacitive pulsed-power supplies are limited. Since the inductor has advantages in energy density, the inductor pulsed-power supply becomes one of the hottest topics recently. The slow transfer of energy through capacitive hybrid meat grinder with inverse current commutation with semiconductor devices proposed by Tsinghua University has demonstrated its advantage and applicability recently. Using this kind of topology, this paper proposes the design of an inductive storage PFU with a stored energy of 100-kJ. The maximum load current reaches to 50 kA and its pulsewidth is at least 5 ms. The optimized inductive storage PFU shows superiority in contrast to the capacitive storage PFU with the same energy. This paper offers the theoretical analysis and the testing foundation for investigating the inductor pulsed-power supply with higher energy. [ABSTRACT FROM PUBLISHER]

By applying the principle of inverse current commutation with semiconductor (ICCOS) devices in a slow transfer of energy through capacitive hybrid (STRETCH) meat grinder system, a novel circuit topology called STRETCH meat grinder with ICCOS was proposed by the Tsinghua University in 2013. It can not only raise the amplitude of the opening current, but also reduce the cost of the STRETCH meat grinder circuit obviously by replacing the integrated gate-commutated thyristor (IGCT) with thyristor. This paper discusses the overall design, system implementation, and testing results of a STRETCH meat grinder with ICCOS system with roughly 1-kJ inductive energy. The load is a spiral coil with 1.4- \textm\Omega resistance and 1.4- \mu \textH inductance. With closed-loop control strategy, the system detects the charging current of the inductors. When it reaches the designated value, the triggering signal for ICCOS is delivered and after the predefined delay time, the triggering signal for discharging the voltage on the pulse-forming capacitor is delivered. The current of the inductors and the load are measured by Rogowski coils. The opening current is 1 kA and the maximum load current is close to 4 kA. All the voltages on the switches are lower than 1 kV. The experimental results are consistent with the simulated ones, which verified the correctness of the theoretical analysis and proved the applicability of the STRETCH meat grinder with ICCOS for larger energy level. [ABSTRACT FROM PUBLISHER]

The energy density of the inductive energy storage systems is one order of magnitude higher than that of the capacitive ones. The slow transfer of energy through capacitive hybrid (STRETCH) meat grinder with inverse current commutation with semiconductor (ICCOS) devices put forward by Tsinghua University is a typical inductive pulsed-power supply for electromagnetic launch system, which has remarkable current amplification ability as a single module. However, one module cannot provide enough amplitude and width for the load current of the railgun launching. Therefore, the collaborative work of multiple inductive source modules is necessary for practical usage. In this paper, the designed inductive power supply system of about 1 MJ is composed of 40 STRETCH meat grinders with ICCOS modules. All the main switches are opened simultaneously to reduce the magnetic field coupling among the modules and make the current rising edge steep. The modules are divided into several groups. The triggering delays of the thyristors between every two adjacent groups are carefully designed. After the first triggers for all the modules, the energy stored in the capacitors can be further utilized with the second triggers. The numerical simulation results show that the appropriate collaborative triggering delay can increase the adjustability of the output current width and the second triggers can further increase the current width and the system efficiency. Therefore, the load current with flat shape, appropriate amplitude, and longer duration can be provided with modular design and collaborate triggering discharge of the multiple modules. This can provide a theoretical foundation for the future study and implementation. [ABSTRACT FROM PUBLISHER]

The STRETCH meat grinder is one typical inductive pulsed-power supply topology for electromagnetic launch system. It has remarkable current amplification ability as a single unit, but one module cannot provide enough amplitude and width for the load current of the railgun launching. This paper discusses the effects of different triggering delays on the load current with two STRETCH meat grinder modules. To reduce the magnetic field coupling between the two modules, the two main switches are opened simultaneously. To make the load current waveform with no notch, the thyristor of the first module is triggered when its pulse-forming capacitor is fully reversely charged. For the thyristor of the second module, we consider several time points of triggering delay. Because of the practical constraint for the maximum rail current that ensures no rail erosion, the rectangular waveform is the most appropriate load current waveform. Therefore, the comparing criterion can be defined as the ratio of the load current waveform area and its maximum rectangle area at different current levels. Higher ratio means that the current is more like a rectangular wave and is better accordingly. Based on the above criterion and extensive simulation research, we found that the best delay time is the moment when the capacitor is reversely charging the inductor completely. This paper and the result are of great theoretical significance for the further study on the collaborative triggering of multiple STRETCH meat grinder modules. [ABSTRACT FROM PUBLISHER]

Inductive pulse power supplies are of interest because their energy densities are one order of magnitude higher than those of capacitive power supplies, based on the same power-output capacity. The Institute of Advanced Technology puts forward an inductive pulse power topology called the slow transfer of energy through capacitive hybrid (STRETCH) meat grinder. In this topology, an active switch is used to cut off the charging current. Limited by the current turning off ability of integrated gated commuted thyristor, it may encounter difficulties in extending to higher-energy systems. Other than that, the cost of the system is very high. In this paper, the principle of the STRETCH meat grinder is presented. Then, the STRETCH meat grinder with inverse current commutation with semiconductor devices (ICCOS), which is proposed by the Institute of Saint Louis, is presented. The process of ICCOS in the STRETCH meat grinder is illustrated in detail. Finally, simulations are made based on Simplorer 8 to explain how ICCOS works clearly. A preliminary discussion of how to design ICCOS is also presented. We conclude that the STRETCH meat grinder with ICCOS removes the limitations of the original one and has potential applications for high-energy systems in future and can cut down the cost greatly. [ABSTRACT FROM PUBLISHER]