Search

The study focusses on synthesis and modification of structural, optical and electrical characteristics of nanostructured titanium dioxide anatase embedded Poly(methyl methacrylate) (PMMA) nanocomposite with different weight percentages (0.03, 0.06, 0.12, 0.18 and 0.24%) by the solvent casting method. Modification in the morphology of PMMA nanocomposites with an increasing amount of titanium dioxide anatase is studied by using a field emission scanning electron microscope (FE-SEM). Micrograms of FE-SEM show spherical shaped nanoparticles distribution in PMMA nanocomposites thin films. In optical characterization, transmission, optical band gaps, the real and imaginary part of dielectric constant, linear susceptibility, optical conductivity, refractive index and extinction coefficient are calculated using experimental data. It is observed that the optical band gap has an overall decreasing trend with increasing the weight percentage of TiO2 (anatase) in PMMA nanocomposites. It is also found that values of all electrical parameters decrease with increasing the weight percentage of TiO2 (anatase) in PMMA nanocomposites. All wavelength depending parameters are investigated in the wavelength range from 190 nm to 2700 nm. Single oscillator model is used to analyze the refractive index dispersion and estimation of the oscillator energy and dispersion energy of the films. The study is applicable to optical sensors and other optoelectronic devices.

Plasmonic metal nanoparticles are known to work as light-harvesting antennae and to enhance photocurrents of photovoltaic cells. Therefore, in this work, the effect of gold (Au) ions distribution on the efficiency of dye sensitized solar cells (DSSCs) has been investigated. Thin films of TiO2 have been deposited on FTO glass substrates by the doctor tape method. Au ions were then implanted on these films with different fluence rates (i.e., 2 × 1014, 4 × 1014 and 6 × 1014 ions/cm2). XRD results confirmed that TiO2 is present in the anatase phase up to a 4 × 104 ions/cm2 fluence rate. At a 6 × 1014 ions/cm2 fluence rate, one peak of rutile is obtained which confirmed that the film has mixed phases of TiO2. UV results show that dye is adsorbed into all photoanodes. Maximum dye absorption is seen at a fluence rate of 4 × 1014 ions/cm2. The energy conversion efficiency of DSSC is highly dependent on the fluence rate of Au. At a fluence rate of 4 × 1014 ions/cm2, the cell has a high short circuit current density (JSC) of 7.21 mA/cm2, resulting in a high efficiency (×) of 2.92%. Impedance spectroscopy shows that the cell formed by Au ions fluence rate of 4 × 1014 ions/cm2 has a low recombination rate of electron/hole pairs.