Search

Electrospinning of water-soluble polymers and retaining their mechanical strength and bioactivity remain challenging. Volatile organic solvent soluble polymers and their derivatives are preferred for fabricating electrospun nanofibers. We report the synthesis and characterization of 2-nitrobenzyl-gelatin (N-Gelatin)--a novel gelatin Schiff base derivative--and the resulting electrospun nanofiber matrices. The 2-nitrobenzyl group is a photoactivatable-caged compound and can be cleaved from the gelatin nanofiber matrices following UV exposure. Such hydrophobic modification allowed the fabrication of gelatin and blend nanofibers with poly(caprolactone) (PCL) having significantly improved tensile properties. Neat gelatin and their PCL blend nanofiber matrices showed a modulus of 9.08 ± 1.5 MPa and 27.61 ± 4.3 MPa, respectively while the modified gelatin and their blends showed 15.63 ± 2.8 MPa and 24.47 ± 8.7 MPa, respectively. The characteristic infrared spectroscopy band for gelatin Schiff base derivative at 1560 cm(-1) disappeared following exposure to UV light indicating the regeneration of free NH2 group and gelatin. These nanofiber matrices supported cell attachment and proliferation with a well spread morphology as evidenced through cell proliferation assay and microscopic techniques. Modified gelatin fiber matrices showed a 73% enhanced cell attachment and proliferation rate compared to pure gelatin. This polymer modification methodology may offer a promising way to fabricate electrospun nanofiber matrices using a variety of proteins and peptides without loss of bioactivity and mechanical strength.

Worldwide, more than 2.2 million patients undergo bone graft procedures annually. In each of these procedures an interface is formed between the host tissue and the graft material. Synthetic implants exhibit an interface with the host tissue and the formation of a homogenous interface consisting of bone and void of intervening soft tissue is desired (osseointegration); recent developments have highlighted the benefit of incorporating nanostructures at that interface. Autograft and allograft bone are frequently used for bone loss, nonunion fractures, and spinal fusions; however, both are plagued with complications either due to supply or inadequate graft properties. In contrast to bone tissue engineering, which uses a top-down approach to repair bone defects, bone regenerative engineering uses a bottom-up approach focused on strategies incorporating stem cells, biomaterials, and growth factors alone or in combination to generate or regenerate bone tissue. Early constructs developed for bone regenerative engineering utilized polymeric microstructures, presenting surface features with characteristic dimensions similar to that of a cell (1µm - 1000µm). These microstructures were typically biodegradable and demonstrated an excellent ability to match the mechanics of native bone tissue. They were also osteoconductive-capable of promoting osteoblast growth. On the other hand, the osteoinductive abilities of these microstructures were lacking. Osteoinduction, or the ability to promote the progression of a preosteoblastic cell to a mature osteoblast, historically was achieved in two ways: via the addition of nanoscale ceramics to the microstructures or via an external stimulus such as the addition of bone morphogenetic proteins (BMPs). More recent developments in bone regenerative engineering have utilized polymeric nanostructures (less than 1µm) with characteristic dimensions an order of magnitude or more less than that of a cell to stimulate and drive an osteoinductive response in the absence of growth factors. Despite strong literature evidence supporting the nanostructures' ability to be both osteoconductive and osteoinductive, there is still disparity regarding how nanostructures regulate the progression towards an osteoblastic phenotype. This review will explore unique micro- and nano-architectures, how they initiate osteoinductive signals through pathways similar to BMPs, and how these unique geometries can be translated to the clinic.

The long-term goal of this work is to develop biomimetic polymer-based systems for bone regeneration that both allow for neutral pH degradation products and have the ability to nucleate bonelike apatite. In this study, the etheric biodegradable polyphosphazene, poly[(50%ethyl glycinato)(50%methoxyethoxyethoxy)phosphazene] (PNEG(50)MEEP(50)) was blended with poly(lactide-co-glycolide) PLAGA and studied their ability to produce high-strength degradable biomaterials with bioactivity. Accordingly, two blends with weight ratios of PNEG(50)MEEP(50) to PLAGA 25:75 (BLEND25) and 50:50 (BLEND50) were fabricated using a mutual solvent approach. Increases in PNEG(50)MEEP(50) content in the blend system resulted in decreased elastic modulus of 779 MPa when compared with 1684 MPa (PLAGA) as well as tensile strength 7.9 MPa when compared with 25.7 MPa (PLAGA). However, the higher PNEG(50)MEEP(50) content in the blend system resulted in higher Ca/P atomic ratio of the apatite layer 1.35 (BLEND50) when compared with 0.69 (BLEND25) indicating improved biomimicry. Furthermore, these blends supported primary rat osteoblast adhesion and proliferation with an enhanced phenotypic expression when compared with PLAGA. These findings establish the suitability of PNEG(50)MEEP(50)-PLAGA biodegradable blends as promising bioactive materials for orthopedic applications.

Solvent/non-solvent sintering creates porous polymeric microsphere scaffolds suitable for tissue engineering purposes with control over the resulting porosity, average pore diameter, and mechanical properties. Five different biodegradable biocompatible polyphosphazenes exhibiting glass transition temperatures from -8 to 41 degrees C and poly (lactide-co-glycolide), (PLAGA) a degradable polymer used in a number of biomedical settings, were examined to study the versatility of the process and benchmark the process to heat sintering. Parameters such as: solvent/non-solvent sintering solution composition and submersion time effect the sintering process. PLAGA microsphere scaffolds fabricated with solvent/non-solvent sintering exhibited an interconnected porosity and pore size of 31.9% and 179.1 mum, respectively which was analogous to that of conventional heat sintered PLAGA microsphere scaffolds. Biodegradable polyphosphazene microsphere scaffolds exhibited a maximum interconnected porosity of 37.6% and a maximum compressive modulus of 94.3 MPa. Solvent/non-solvent sintering is an effective strategy for sintering polymeric microspheres, with a broad spectrum of glass transition temperatures, under ambient conditions making it an excellent fabrication route for developing tissue engineering scaffolds and drug delivery vehicles., ((c) 2007 Wiley Periodicals, Inc.)

The nontoxic, neutral degradation products of amino acid ester polyphosphazenes make them ideal candidates for in vivo orthopedic applications. The quest for new osteocompatible materials for load bearing tissue engineering applications has led us to investigate mechanically competent amino acid ester substituted polyphosphazenes. In this study, we have synthesized three biodegradable polyphosphazenes substituted with side groups, namely, leucine, valine, and phenylalanine ethyl esters. Of these polymers, the phenylalanine ethyl ester substituted polyphosphazene showed the highest glass transition temperature (41.6 degrees C) and, hence, was chosen as a candidate material for forming composite microspheres with 100 nm sized hydroxyapatite (nHAp). The fabricated composite microspheres were sintered into a three-dimensional (3-D) porous scaffold by adopting a dynamic solvent sintering approach. The composite microsphere scaffolds showed compressive moduli of 46-81 MPa with mean pore diameters in the range of 86-145 microm. The 3-D polyphosphazene-nHAp composite microsphere scaffolds showed good osteoblast cell adhesion, proliferation, and alkaline phosphatase expression and are potential suitors for bone tissue engineering applications.