Search

Dental Implants are expected to possess both excellent osteointegration and antibacterial activity because poor osseointegration and infection are two major causes of titanium implant failure. In this study, we constructed layer-by-layer self-assembly films consisting of anionic casein phosphopeptides-amorphous calcium phosphate (CPP-ACP) and cationic poly (L-lysine) (PLL) on sandblasted and acid etched (SLA) titanium surfaces and evaluated their osseointegration and antibacterial performance in vitro and in vivo. The surface properties were examined, including microstructure, elemental composition, wettability, and Ca 2+ ion release. The impact the surfaces had on the adhesion, proliferation and differentiation abilities of MC3T3-E1 cells were investigated, as well as the material's antibacterial performance after exposure to the oral microorganisms such as Porphyromonas gingivalis (P. g) and Actinobacillus actinomycetemcomitans (A. a). For the in vivo studies, SLA and Ti (PLL/CA-3.0) 10 implants were inserted into the extraction socket immediately after extracting the rabbit mandibular anterior teeth with or without exposure to mixed bacteria solution (P. g & A. a). Three rabbits in each group were sacrificed to collect samples at 2, 4, and 6 weeks of post-implantation, respectively. Radiographic and histomorphometry examinations were performed to evaluate the implant osseointegration. The modified titanium surfaces were successfully prepared and appeared as a compact nano-structure with high hydrophilicity. In particular, the Ti (PLL/CA-3.0) 10 surface was able to continuously release Ca 2+ ions. From the in vitro and in vivo studies, the modified titanium surfaces expressed enhanced osteogenic and antibacterial properties. Hence, the PLL/CPP-ACP multilayer coating on titanium surfaces was constructed via a layer-by-layer self-assembly technology, possibly improving the biofunctionalization of Ti-based dental implants., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

SEMA4D-modified titanium surfaces can indirectly regulate macrophages through endothelial cells to achieve an anti-inflammatory effect, which is beneficial for healing soft tissues around the gingival abutment. However, the mechanism of surface-induced cellular phenotypic changes in SEMA4D-modified titanium has not yet been elucidated. SEMA4D activates the RhoA signaling pathway in endothelial cells, which coordinates metabolism and cytoskeletal remodeling. This study hypothesized that endothelial cells inoculated on SEMA4D-modified titanium surfaces can direct M2 polarization of macrophages via metabolites. An indirect co-culture model of endothelial cells and macrophages was constructed in vitro, and specific inhibitors were employed. Subsequently, endothelial cell adhesion and migration, metabolic changes, Rho/ROCK1 expression, and inflammatory expression of macrophages were assessed via immunofluorescence microscopy, specific kits, qRT-PCR, and Western blotting. Moreover, an in vivo rat bilateral maxillary implant model was constructed to evaluate the soft tissue healing effect. The in vitro experiments showed that the SEMA4D group had stronger endothelial cell adhesion and migration, increased Rho/ROCK1 expression, and enhanced release of lactate. Additionally, decreased macrophage inflammatory expression was observed. In contrast, the inhibitor group partially suppressed lactate metabolism and motility, whereas increased inflammatory expression. The in vivo analyses indicated that the SEMA4D group had faster and better angiogenic and anti-inflammatory effects, especially in the early stage. In conclusion, via the Rho/ROCK1 signaling pathway, the SEMA4D-modified titanium surface promotes endothelial cell adhesion and migration and lactic acid release, then the paracrine lactic acid promotes the polarization of macrophages to M2, thus obtaining the dual effects of angiogenesis and anti-inflammation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This study investigated the corrosion susceptibility of pure titanium under uric acid exposure for 7 days based on surface analysis. The prepared pure titanium specimens, exposed to different concentrations of uric acid, were examined for surface microstructure, surface element composition and surface wettability using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and static contact angle measurement, respectively. The corrosion behaviors of titanium specimens were measured by open-circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. The titanium ion release from the prepared specimens, which were immersed in Hank's balanced salt solution (HBSS) containing different amount of uric acid, was measured by inductively coupled plasma atomic emission spectrometry (ICP-AES). More irregular pitting holes were observed on titanium surfaces exposed to a high concentration of uric acid, and XPS analyses revealed that the amount of titanium dioxide (TiO 2 ) decreased. Titanium surfaces pre-treated with high uric acid became more hydrophobic. Furthermore, the results of OCP and potentiodynamic polarization tests showed increased corrosion susceptibility of titanium samples, while EIS data indicated more active corrosion behavior of titanium materials. The high concentration of uric acid also induced titanium ion release. High concentration of uric acid negatively influenced the surface characteristics and corrosion properties of titanium materials, which destroyed the titanium oxide film barrier. High uric acid exposure increased corrosion susceptibility of pure titanium specimens and accelerated titanium ion release. Graphical abstract., (© 2022. The Author(s).)

In this study, we established a procedure to prepare a Semaphorin4D (SEMA4D)-immobilized titanium surface and explored its effects on macrophage behaviors in an endothelial cell/macrophage indirect coculture model. The SEMA4D-bovine serum albumin complex was immobilized onto a preprocessed poly L-lysine titanium surface through NaOH hydrothermal treatment and self-assembly technology. All titanium specimens were examined for surface microstructure, surface element composition, and surface wettability by field emission scanning electron microscopy, x-ray photoelectron spectroscopy (XPS), and water contact angle measurement, respectively. Subsequently, we constructed an endothelial cell/macrophage indirect coculture model and evaluated the activation of NF-κB signaling pathway and the expression of proinflammatory cytokines (TNF α , IL-6, and IL-1 β ) in macrophages. In XPS analysis, the SEMA4D-immobilized titanium surface appeared as a loose porous structure covered with uniform film, which exhibited better hydrophilicity than the control smooth titanium surface. In the indirect coculture model, SEMA4D attenuated the activation of NF-κB signaling pathway of lipopolysaccharide-stimulated THP-1 macrophages, thereby downregulating the expression of proinflammatory cytokines in macrophages. In conclusion, SEMA4D could be immobilized on titanium surfaces through NaOH hydrothermal treatment and self-assembly technology. Meanwhile, SEMA4D immobilization altered the characteristics of the titanium surfaces, which negatively regulated macrophage behaviors in the endothelial cell/macrophage indirect coculture model., (© 2021 IOP Publishing Ltd.)

The application of titanium as medical implants is limited to a certain extent due to its insufficient corrosion resistance, biological activity, and antibacterial ability. In this work, a gradient nanograined (GNG) layer was fabricated on the titanium surface by surface ultrasonic rolling treatment (SURT). The subsequent copperizing kinetics was greatly enhanced so that a thick copperized layer could be obtained on the surface of GNG Ti at a relatively low diffusion temperature (450 °C). Meanwhile, the GNG structure accelerated the release rate of Cu 2+ , which endows GNG Cu/Ti with strong antibacterial activity. Moreover, the corrosion resistance and cytocompatibility of GNG Cu/Ti were also evidently improved compared with coarse-grained Ti, indicating a good biomedical application prospect.

The presence of metal ions, such as titanium (Ti) ions, is toxic to adjacent tissues of implants. Indeed, Ti ions may induce an inflammatory response through the NF-κB pathway, thus causing damage to soft and hard tissues. The involvement of Yes-associated protein (YAP), a key factor of the Hippo pathway, in an immuno-inflammatory response has been confirmed, whereas its role in Ti ion-mediated inflammation has not been elucidated. Therefore, this study aimed to investigate the role of signal crosstalk between the Hippo/YAP and NF-κB signaling pathways in the pro-inflammatory effect of Ti ions on macrophages. In our work, RAW264.7 cells were cocultured with Ti ions. The migration capacity of macrophages under Ti ion exposure was measured by transwell assay. Western blot analysis was used to detect the expressions of related proteins. Polymerase chain reaction was used to evaluate the expression of pro-inflammatory cytokines. The nucleus translocation of YAP and P65 was visualized and analyzed via immunofluorescence staining. The results showed that the migration of macrophages was promoted under Ti ion exposure. Ten parts per million Ti ions induced nuclear expression of YAP and activated the NF-κB pathway, which finally upregulated the expression of pro-inflammatory cytokines in macrophages. Moreover, the inhibition of the NF-κB pathway rescued the reduction of YAP expression under Ti ion exposure. Most importantly, the overexpression of YAP exacerbated the inflammatory response mediated by Ti ions through the NF-κB pathway. In summary, this study explored the mechanism of Hippo-YAP/NF-κB pathway crosstalk involved in the regulation of macrophage behaviors under Ti ion exposure., (© 2020 John Wiley & Sons, Ltd.)

Titanium (Ti) and alloys thereof are commonly utilized in biomedical settings owing to their desirable mechanical properties and good biocompatibility. However, when exposed to biological systems for extended periods of time, Ti still undergoes corrosion. In the present study, we therefore explore the impact of osteoclasts (OC) on the surface characteristics and corrosion of commercially pure Titanium (cpTi) in the context of lipopolysaccharide (LPS)-induced inflammation. We utilized tartrate resistant acidic phosphatase (TRAP) and fluorescence staining to assess OC properties, while scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), optical profilometer, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization tests, and inductively coupled plasma atomic emission spectrometry (ICP-AES) were used to evaluate metal microstructure, surface composition and roughness, electrochemical corrosion properties, and metal ion release. SEM findings demonstrated that the surface of cpTi exhibited micro-pitting as well as the presence of viable OCs. Correspondingly, cpTi that had been exposed to OCs exhibited reduced levels of Ti, oxygen, and oxides within the corroded regions relative to smooth Ti as measured via EDS and XPS. OC exposure was also associated with significant changes in cpTi surface roughness, a significant decrease in corrosion resistance, and a significant increase in the release of Ti ions into the surrounding medium. In summary, these findings indicate that OC culture on the surface of cpTi can directly corrode titanium and lead to the release of Ti ions., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The oral cavity is a complex environment that is constantly undergoing remodeling. This provides a favorable electrolytic aqueous condition, which causes the corrosion of titanium implants and the release of titanium (Ti) ions. The accumulation of Ti ions in the peri‑implant tissues may affect the osteogenesis process. Therefore, the present study aimed to investigate the possible effects of Ti ions on osteoblast physiology and its underlying mechanism, specifically the MAPK/JNK signaling pathway. In the present study, MC3T3‑E1 osteoblasts were cultured the medium containing 10 ppm Ti ions. Confocal laser scanning microscopy was used to analyze cell morphology and adhesion. Alkaline phosphatase (ALP) activity assay and western blotting were performed to evaluate the expression of proteins associated with osteogenesis such as Runx2 and Osterix. Nuclear translocation of JNK, a key factor of the MAPK signaling pathway, was visualized and analyzed using immunofluorescence staining. The results showed that 10 ppm Ti ions exerted negative effects on the biological behaviors of MC3T3‑E1 cells, which exhibited reduced adhesion, ALP activity and osteogenic differentiation. It was also found that 10 ppm Ti ions activated the MAPK/JNK signaling pathway by promoting the nuclear translocation of JNK via phosphorylation. In addition, the inhibitory effects of 10 ppm Ti ions on MC3T3‑E1 cells was found to be reversed by the JNK inhibitor SP600125. In conclusion, the preset study suggests that the MAPK/JNK signaling pathway serves a key role in the molecular mechanism underlying the changes in osteoblast behavior following Ti ion exposure. These findings may serve as a valuable reference point for the further in‑depth exploration of peri‑implant bone loss.

Statement of Problem: The corrosive effects of oral fluoride products on titanium have been reported, and chronic fluorosis, which causes hyperfluoemia, is one of the world's health problems. Nevertheless, the relationship between high serum fluoride and corrosion on the titanium surface, which might have adverse effects on titanium implant osseointegration, has not been elucidated., Purpose: The purpose of this in vitro study was to investigate the corrosion behavior of pure titanium exposed to high serum fluoride with different pH values based on surface analysis., Material and Methods: Pure titanium specimens, exposed to different electrolytes with 0.04 and 0.4 ppm NaF at pH 7.3 and 5.0 values, were examined for surface microstructure by using scanning electron microscopy (SEM) and for surface element composition with X-ray photoelectron spectroscopy (XPS). The corrosion behavior and metal ion release of specimens immersed in the Hanks' balanced salt solution (HBSS) containing 0.04 and 0.4 ppm serum fluoride concentrations (NaF) at 7.3 and 5.0 pH values were measured by electrochemical impedance spectroscopy (EIS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)., Results: Pitting holes were observed on pure titanium surfaces exposed to high serum fluoride. The surfaces became rougher with the increase of serum fluoride concentration, especially under acidic conditions. XPS analysis revealed a reduction of dominant titanium dioxide (TiO 2 ) on the pure titanium surface under serum fluoride exposure, corresponding to an increase in the relative level of F. EIS data showed an active corrosion behavior of pure titanium exposed to high serum fluoride and gradually decreased corrosion resistance with increasing concentration of serum fluoride, which was more severe under acidic conditions. The release of titanium ions was also induced by high serum fluoride and acidic conditions., Conclusions: High serum fluoride had a negative influence on the corrosion behavior of pure titanium. The titanium oxide film barrier could be broken down in the fluoride ions condition, and the corrosion resistance of pure titanium decreased with the increasing concentration of serum fluoride. The increased corrosion susceptibility of pure titanium accelerated the release of titanium ions after exposure to high serum fluoride; this was more pronounced in an acidic environment., (Copyright © 2020 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The aim of this study was to explore the changes in the characteristics of titanium surface and the osteoblast-titanium interactions under cigarette smoke extract (CSE) exposure. In this study, CSE was used to simulate the oral liquid environment around the implant under cigarette smoke exposure. Titanium samples were immersed in CSE to explore the changes in the characteristics of titanium surface. The physical properties of titanium surface were measured, including surface micromorphology, surface elemental composition, roughness, and surface hydrophilicity. MC3T3-E1 cells were cultured on the titanium surface in vitro under different concentrations of CSE exposure, and cell adhesion, cell proliferation, and osteogenic differentiation were observed. The surface micromorphology and elemental composition of titanium surface changed under CSE exposure. No obvious changes were found in the surface roughness and the hydrophilicity of titanium samples. Moreover, the results of in vitro study showed that CSE exposure downregulated the cell spreading, proliferation, and osteogenic differentiation of MC3T3-E1 cells on the titanium surface. It could be speculated that some carbon-containing compounds from CSE adsorbed on the titanium surface and the osteoblast-titanium interactions were influenced under CSE exposure. It is hoped that these results could provide valuable information for further studies on smoking-mediated inhibition of implants osseointegration.

Titanium (Ti) and its alloys as bio-implants have excellent biocompatibilities and osteogenic properties after modification of chemical composition and topography via various methods. The corrosion resistance of these modified materials is of great importance for changing oral system, while few researches have reported this point. Recently, oxidative corrosion induced by cellular metabolites has been well concerned. In this study, we explored the corrosion behaviors of four common materials (commercially pure Ti, cp-Ti; Sandblasting and acid etching-modified Ti, Ti-SLA; nanowires-modified Ti, Ti-NW; and zinc-containing nanowires-modified Ti, Ti-NW-Zn) with excellent biocompatibilities and osteogenic capacities under the macrophages induced-oxidizing microenvironment. The results showed that the materials immersed into a high oxidizing environment were more vulnerable to corrode. Meanwhile, different surfaces also showed various corrosion susceptibilities under oxidizing condition. Samples embed with zinc element exhibited more excellent corrosion resistance compared with other three surfaces exposure to excessive H 2 O 2 . Besides, we found that zinc-decorated Ti surfaces inhibited the adhesion and proliferation of macrophages on its surface and induced the M2 states of macrophages to better healing and tissue reconstruction. Most importantly, zinc-decorated Ti surfaces markedly increased the expressions of antioxidant enzyme relative genes in macrophages. It improved the oxidation microenvironment around the materials and further protected their properties. In summary, our results demonstrated that Ti-NW-Zn surfaces not only provided excellent corrosion resistance properties, but also inhibited the adhesion of macrophages. These aspects were necessary for maintaining osseointegration capacity and enhancing the corrosion resistance of Ti in numerous medical applications, particularly in dentistry.

Titanium (Ti) and its corresponding alloys have been widely applied in dental and orthopedic implants. Owing to abrasion and corrosion of implants in the unfavorable electrolytic aqueous environment of the host body, Ti ions could be released from implants and accumulated in local tissues. Recent studies have found that excessive Ti ions were toxic to osteoblasts in adjacent bone tissues and subsequently influenced long-term effects on implant prostheses. However, the potential molecular mechanisms underlying the damage to osteoblasts induced by Ti ions remained unclear. Hippo signaling has been confirmed to be involved in organ size and tissue regeneration in many organs, while its roles in osteoblasts differentiation and bone repair remained elusive. Therefore, we hypothesize that YAP, a regulator of Hippo pathway, inhibited osteoblast growth, skeletal development and bone repair, as well as excessive Ti ions promoted the progression of YAP activation. This study aimed to explore the role of Hippo/YAP signaling pathway in the biotoxicity effect of Ti ions on osteoblast behaviors. Here, we confirmed that 10 ppm Ti ions, a minimum concentration gradient previously reported that was capable of suppressing osteoblasts growth, induced nuclear expression of YAP in osteoblasts in our study. Furthermore, 10 ppm Ti ion-induced YAP activation was found to downregulate osteogenic differentiation of MC3T3-E1 cells. Most importantly, the hypothesis we proposed that knockdown of YAP did reverse the inhibitory effect of 10 ppm Ti ions on osteogenesis has been verified. Taken together, our work provides insights into the mechanism of which YAP is involved in regulating osteoblast behaviors under the effect of Ti ions, which may help to develop therapeutic applications for Ti implant failures and peri-implantitis., (Copyright © 2018 John Wiley & Sons, Ltd.)

It is well known that some microorganisms affect the corrosion of dental metal. Oral bacteria such as Actinomyces naeslundii may alter the corrosion behavior and stability of titanium. In this study, the corrosion behavior of titanium was studied in a nutrient-rich medium both in the presence and the absence of A. naeslundii using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS). A. naeslundii was able to colonize the surface of titanium and then form a dense biofilm. The SEM images revealed the occurrence of micropitting corrosion on the metal surface after removal of the biofilm. The electrochemical corrosion results from EIS showed a significant decrease in the corrosion resistant (R(p)) value after immersing the metal in A. naeslundii culture for 3 days. Correspondingly, XPS revealed a reduction in the relative levels of titanium and oxygen and an obvious reduction of dominant titanium dioxide (TiO₂) in the surface oxides after immersion of the metal in A. naeslundii culture. These results suggest that the metabolites produced by A. naeslundii can weaken the integrity and stability of the protective TiO₂ in the surface oxides, which in turn decreases the corrosion resistance of titanium, resulting in increased corrosion of titanium immersed in A. naeslundii solution as a function of time.

Recently, TiO(2) nanotube layers are widely used in orthopedics and dental applications because of their good promotion effect on bone cells. Furthermore, peptide sequences such as arginine-glycine-aspartic acid are used to modify Ti implant for binding to cell surface integrins through motif. In this study, a cellular adhesive peptide of arginine-glycine-aspartic acid-cysteine (RGDC) was immobilized onto anodized TiO(2) nanotubes on Ti to examine its in vitro responses on rat bone marrow stromal cells (BMSCs). Materials were characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy techniques. High-resolution C1s scans suggested the presence of RGDC on the surface and SEM images confirmed the nanotubes were not destroyed after modification. BMSCs adhesion and osteogenic gene expression were detected in TiO(2) nanotube layers with and without RGDC modification by fluorescence microscopy, confocal laser scanning microscopy, SEM, and realtime polymerase chain reaction (Real-time PCR). Results showed that the TiO(2) nanotube layers immobilized with RGDC increased BMSCs adhesion compared to nonfunctionalized nanotubes after 4 h of cultivation. Furthermore, the osteogenic gene expression of BMSCs was dramatically enhanced on the TiO(2) nanotube layers immobilized with RGDC (10 mM) compared to the TiO(2) nanotube layers immobilized with RGDC (1 mM) and non-functionalized anodized Ti. Our results from in vitro study provided evidence that Ti anodized to possess nanotubes and then further functionalized with RGDC should be further studied for the design of better biomedical implant surfaces.

Titanium oxide nanotubes prepared by anodization have received considerable attention in the biomaterials domain. The objective of this study was to demonstrate the electrochemical behavior of different diameter TiO(2) nanotube layers on titanium in phosphate buffered saline (PBS) and Dulbecco's minimum essential medium+10% fetal calf serum (D-FCS) using open circuit potentials (OCP), electrical impedance spectroscopy (EIS), and a potentiodynamic polarization test. The results showed that the nanotubes had higher OCP, higher resistance of the inter barrier layer (R(b)), and lower I(pass) in the two test solutions compared to the smooth Ti, especially the 30 nm diameter nanotubes. The corrosion resistance of the nanotubes in D-FCS was higher than in PBS because of protein adsorption from the D-FCS solution as suggested by scanning electron microscope (SEM) images. In addition, protein aggregates of 30 nm diameter nanotubes caused the model of EIS spectra to transform from two-layer to three-layer. The corrosion behavior of the nanotubes for use as a dental implant material is discussed., (Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.)

It is well known that the growth of osteoblast cultured on titanium with nanotube layers can be significantly increased compared to unanodized surfaces. In the current study, the corrosion behavior of titanium with nanotube layers was studied in naturally aerated Hank's solution using open circuit potentials (OCP), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests. The electrochemical results indicated that TiO2 nanotube layers on titanium showed a better corrosion resistance in simulated biofluid than that of smooth-Ti. The OCP, corrosion rate (I(corr)), passive current density (I(pass)) and the oxygen evolution potential (E(o)) were significantly influenced by titanium oxide nanotube layers acquired by anodization. The anatase nanotube layer showed higher OCP and smaller current density than the amorphous nanotube layer. EIS analysis showed that the annealing had a significant effect on the corrosion resistance of the outer tube layer (R(t)), but little effect on the corrosion resistance of the inter-barrier layer (R(b)) for nanotube layers. The results suggested that titanium with TiO2 nanotube layers has an adequate electrochemical behavior for use as a dental implant material.

To elucidate the adsorption mechanism of CS-A to the surface of titanium, 5 ml solutions of the CS-A were reacted with 2 g of native and 2 g of calcium-treated titanium powder for 48 h at 37 degrees C. Residual CS-A was detected by the carbazole elaborate method. The results showed that no CS-A attached to native titanium. Comparatively, titanium treated with calcium produced a significant adsorption of CS-A. At concentration of 60 micrograms/ml, the adsorption of CA-A to calcium-treated titanium powder attained the maximum, 83 micrograms/g. Only EDTA can liberate the bound CS-A from titanium surface. These findings suggest that calcium ion is necessary for the adsorption of CS-A to titanium.

Objective: This study aimed to synthesize zinc‐incorporated nanowires structure modified titanium implant surface (Zn‐NW‐Ti) and explore its superior osteogenic and antibacterial properties in vitro and in vivo. Materials and methods: Zn‐NW‐Ti was synthesized via displacement reactions between zinc sulfate solutions and the titanium (Ti) surface, which was pretreated by hydrofluoric acid etching and hyperthermal alkalinization. The physicochemical properties of the Zn‐NW‐Ti surface were examined. Moreover, the biological effects of Zn‐NW‐Ti on MC3T3‐E1 cells and its antibacterial property against oral pathogenic bacteria (Staphylococcus aureus, Porphyromonas gingivalis, and Actinobacillus actinomycetemcomitans) compared with sandblasted and acid‐etched Ti (SLA‐Ti) and nanowires modified Ti (NW‐Ti) surface were assessed. Zn‐NW‐Ti and SLA‐Ti modified implants were inserted into the anterior extraction socket of the rabbit mandible with or without exposure to the mixed bacterial solution (S. aureus, P. gingivalis, and A. actinomycetemcomitans) to investigate the osteointegration and antibacterial performance via radiographic and histomorphometric analysis. Results: The Zn‐NW‐Ti surface was successfully prepared. The resultant titanium surface appeared as a nanowires structure with hydrophilicity, from which zinc ions were released in an effective concentration range. The Zn‐NW‐Ti surface performed better in facilitating the adhesion, proliferation, and differentiation of MC3T3‐E1 cells while inhibiting the colonization of bacteria compared with SLA‐Ti and NW‐Ti surface. The Zn‐NW‐Ti implant exhibited enhanced osseointegration in vivo, which was attributed to increased osteogenic activity and reduced bacterial‐induced inflammation compared with the SLA‐Ti implant. Conclusions: The Zn‐incorporated nanowires structure modified titanium implant surface exhibited improvements in osteogenic and antibacterial properties, which optimized osteointegration in comparison with SLA titanium implant surface. [ABSTRACT FROM AUTHOR]

The purpose of this study is to explore a storage solution for titanium implants and investigate its osteogenic properties. The commercial pure titanium (cp-Ti) surface and double-etched (SLA) titanium surface specimens were preserved in air, saline, 10 mM Vitamin C (VitC)-containing saline and 100 mM VitC-containing saline storage solutions for 2 weeks. The surface microtopography of titanium was observed by scanning electron microscopy (SEM), the surface elemental compositions of the specimens were analyzed by Raman and X-ray photoelectron spectroscopy (XPS), and water contact angle and surface roughness of the specimens were tested. The protein adsorption capacity of two titanium surfaces after storage in different media was examined by BCA kit. The MC3T3-E1 osteoblasts were cultured on two titanium surfaces after storage in different media, and the proliferation, adhesion and osteogenic differentiation activity of osteoblasts were detected by CCK-8, laser confocal microscope (CLSM) and Western blot. The SEM results indicated that the titanium surfaces of the air group were relatively clean while scattered sodium chloride or VitC crystals were seen on the titanium surfaces of the other three groups. There were no significant differences in the micromorphology of the titanium surfaces among the four groups. Raman spectroscopy detected VitC crystals on the titanium surfaces of two experimental groups. The XPS, water contact angle and surface roughness results suggested that cp-Ti and SLA-Ti stored in 0.9% NaCl and two VitC-containing saline storage solutions possessed less carbon contamination and higher surface hydrophilicity. Moreover, the protein adsorption potentials of cp-Ti and SLA-Ti surfaces were significantly improved under preservation in two VitC-containing saline storage solutions. The results of in vitro study showed that the preservation of two titanium surfaces in 100 mM VitC-containing saline storage solution upregulated the cell adhesion, proliferation, osteogenic related protein expressions of MC3T3-E1 osteoblasts. In conclusion, preservation of cp-Ti and SLA-Ti in 100 mM VitC-containing saline storage solution could effectively reduce carbon contamination and enhance surface hydrophilicity, which was conducive to osteogenic differentiation of osteoblasts. [ABSTRACT FROM AUTHOR]

Objective: This study aims to investigate the influence of fluoride exposure on implant osseointegration. Methods: A total of 24 male New Zealand white rabbits were randomly divided into the control group and the fluoride exposure group. Rabbits in the control group were fed with tap water, while those in the fluoride exposure group were given 200 mg/L sodium fluoride solution. After 2‐month feeding, implants were inserted into the extraction socket immediately after extraction of rabbit mandibular anterior teeth. Four rabbits in each group were sacrificed to collect the implants samples at 1, 2, and 3 months post‐implantation, respectively. Radiographic and histomorphometry examinations were performed to evaluate the condition of implant osseointegration. Results: Bone volume around the implants increased in a time‐dependent manner in both groups. Micro‐CT images illustrated that the bone mineral density (BMD) in the fluoride exposure group was significantly lower than that in the control group after implantation for 2 and 3 months. The bone–implant contact ratio (BIC) in the fluoride exposure group was much lower than that of the control group at 3 months post‐implantation according to histomorphometry examination. Conclusions: In rabbit animal model, high fluoride exposure affected the quality of bone surrounding the implant and significantly reduced bone integration of the implant, especially in the late stage of osseointegration. [ABSTRACT FROM AUTHOR]

A robust and reliable method for improving the photocatalytic performance of InP, which is one of the best known materials for solar photoconversion (i.e., solar cells). In this article, we report substantial improvements (up to 18×) in the photocatalytic yields for CO2 reduction to CO through the surface passivation of InP with TiO2 deposited by atomic layer deposition (ALD). Here, the main mechanisms of enhancement are the introduction of catalytically active sites and the formation of a pn-junction. Photoelectrochemical reactions were carried out in a nonaqueous solution consisting of ionic liquid, 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM]BF4), dissolved in acetonitrile, which enables CO2 reduction with a Faradaic efficiency of 99 % at an underpotential of +0.78 V. While the photocatalytic yield increases with the addition of the TiO2 layer, a corresponding drop in the photoluminescence intensity indicates the presence of catalytically active sites, which cause an increase in the electron-hole pair recombination rate. NMR spectra show that the [EMIM]+ ions in solution form an intermediate complex with CO2−, thus lowering the energy barrier of this reaction. [ABSTRACT FROM AUTHOR]

Abstract: Titanium oxide nanotubes prepared by anodization have received considerable attention in the biomaterials domain. The objective of this study was to demonstrate the electrochemical behavior of different diameter TiO2 nanotube layers on titanium in phosphate buffered saline (PBS) and Dulbecco''s minimum essential medium+10% fetal calf serum (D-FCS) using open circuit potentials (OCP), electrical impedance spectroscopy (EIS), and a potentiodynamic polarization test. The results showed that the nanotubes had higher OCP, higher resistance of the inter barrier layer (R b), and lower I pass in the two test solutions compared to the smooth Ti, especially the 30nm diameter nanotubes. The corrosion resistance of the nanotubes in D-FCS was higher than in PBS because of protein adsorption from the D-FCS solution as suggested by scanning electron microscope (SEM) images. In addition, protein aggregates of 30nm diameter nanotubes caused the model of EIS spectra to transform from two-layer to three-layer. The corrosion behavior of the nanotubes for use as a dental implant material is discussed. [Copyright &y& Elsevier]

PURPOSE: With the help of electrochemical impedance spectroscopy (EIS), the purpose of the study was to investigate the corrosion resistance of CoCr alloys, NiCr alloys and commercially pure Ti (cp Ti) in the artificial saliva (AS). METHODS: With the EIS, a test was made on the three alloys/metals in the AS (See Bode plot and Nyqoist plot). And then, an analysis was made on what was known in the test by the software of ZSimpWin, after which the corrosion resistance of the alloys/metals was evaluated against the parameters of equivalent circuit [R (CR)]. RESULTS: In the Nyquist plot, the capacitance arc radius was in the sequence of cp Ti>CoCr>NiCr. From the Bode plot, an one time constant was able to he obtained. That was the capacitor layer. According to the equivalent circuit [R (CR)]. there was no significant difference in the capacitor layer of the three alloys/metals. And the sequence of the impedance value of the three alloys/metals was cp Ti>CoCr>NiCr. CONCLUSIONS: The EIS results suggest that the three alloys/metals have a great corrosion resistance with cp Ti having the highest corrosion resistance and that CoCr alloys is better than NiCr alloys in the corrosion resistance. Supported by Research Fund of Science and Technology Commission of Shanghai Municipality (Grant No.08DZ2271 100) and Shanghai Leading Academic Discipline Project (Grant No.T0202). [ABSTRACT FROM AUTHOR]

OBJECTIVE:To investigate the variation of the corrosion resistance of anodized oxidation film on titanium by electrochemical methods. METHODS:TiO2 nanotube layer was formed on Ti surface by anodization. The morphology was observed with scanning electron microscope (SEM) and the crystal phase was analyzed using X-ray diffraction(XRD) before and after annealing. Polarization curves were examined by electrochemical methods. RESULTS:Titanium oxide nanotubes with 80 nm diameter and 400 nm length was seen on Ti after anodization. The annealing nanotubes was anatase crystalline phase by X-ray diffraction analysis. The self-corrosion potential and break-down potential of smooth Ti were significantly lower than TiO2 nanotubes by anodization (P < 0.05). The self-corrosion current and passived current were significantly higher than TiO2 nanotubes by anodization (P < 0.05). Annealing improved the corrosion resistance of anodized oxidation film on titanium. CONCLUSION:The results of electrochemical examinations indicate that the TiO2 nanotubes by anodization increases the corrosion resistance of titanium. [ABSTRACT FROM AUTHOR]

Objective The aim of this study was to present a procedure of preparing calcium-containing nanowires on pretreated micro-structured titanium substrate and explore the superiority of this modified titanium surface compared with SLA titanium surface in biological behavior of osteoblasts. Materials and methods In this study, micro-structured titanium substrate was prepared via acid etching. Through hydrothermal treatment with a NaOH solution, nanowires were synthesized on the pretreated micro-structured titanium substrate to prepare the nanowires modified titanium surface (Ti-NW). Then, the Na + existing in the nanowires was replaced by Ca 2+ through secondary hydrothermal treatment with a CaCl 2 solution to prepare the calcium-containing nanowires modified titanium surface (Ti-NW-Ca). The sandblasting and acid etching (SLA) titanium surface, which was most commonly used for clinical oral implants, was prepared as the control group. Physical properties of different titanium surfaces including topography, elemental composition, surface roughness and wettability were measured. Assays of spreading, proliferation and differentiation abilities of MC3T3-E1 cells on different titanium surfaces were investigated as well. Results The modified titanium surface was successfully prepared and appeared as calcium-containing nanowire networks, which revealed excellent hydrophilicity and could sustainedly release Ca ions into phosphate buffer saline. The results of in vitro study showed that the Ti-NW-Ca surface had satisfactory osteocompatibility and upregulated the cell spreading, proliferation and differentiation in comparison with the SLA titanium surface. Conclusions Compared with the SLA titanium surface, the calcium-containing nanowires modified titanium surface demonstrated the ability to enhance osteoblast behavior and suggested the potential to accelerate the dental implant osseointegration. [ABSTRACT FROM AUTHOR]

[Display omitted] • The F-TaO x coating is fabricated on titanium by one-step reactive sputtering deposition. • The F-TaO x coating shows superhydrophilicity, improved surface hardness and corrosion resistance. • The F-TaO x coating obtains superior and long-lasting antibacterial properties by the F-, TiF 3 and Ta 2 O 5 compounds. • The F-TaO x coating possesses good cytocompatibility and improved osteogenic activity. Infections and poor osseointegration are the main challenges for titanium implants in clinical practice. Herein, we proposed fabricating a novel fluoride-doped tantalum oxide (F-TaO x) coating on titanium by one-step reactive sputtering deposition to endow implants with superior antibacterial and osteogenic ability. By altering the fluorine and oxygen loading amount, the coating's physicochemical properties, corrosion resistance, antibacterial and osteogenic activities are tuned simultaneously. All coatings exhibit nano-morphology, superhydrophilicity and improved surface hardness. Despite containing fluoride, the F-TaO x coating produced with fluorine and oxygen dual-deposition still shows enhanced corrosion resistance due to the protection of existing metal oxidizes. The antibacterial test reveals that the F-TaO x coating exhibits long-lasting and superior antibacterial properties. The microenvironment acidification by F-, the excessive ROS generation and the disruption of ATP by F-, TiF 3 and Ta 2 O 5 , and the repulsive force by superhydrophilic surface synergistically result in bacterial death. The cell experiments indicate that the F-TaO x coating shows good cytocompatibility, promote cell spread and osteogenic differentiation by enhancing ALP activities and ECM mineralization. This work provides a promising strategy for the surface functionalization of metallic implants to produce dual anti-infection and osteogenesis effects for orthopedic and dental applications. [ABSTRACT FROM AUTHOR]

Osseointegration is a prerequisite for the function of dental implants, and macrophage-dominated immune responses triggered by implantation determine the outcome of ultimate bone healing mediated by osteogenic cells. The present study aimed to develop a modified titanium (Ti) surface by covalently immobilizing chitosan-stabilized selenium nanoparticles (CS-SeNPs) to sandblasted, large grit, and acid-etched (SLA) Ti substrates and further explore its surface characteristics as well as osteogenic and anti-inflammatory activities in vitro. CS-SeNPs were successfully prepared by chemical synthesis and characterized their morphology, elemental composition, particle size, and Zeta potential. Subsequently, three different concentrations of CS-SeNPs were loaded to SLA Ti substrates (Ti-Se1, Ti-Se5, and Ti-Se10) using a covalent coupling strategy, and the SLA Ti surface (Ti-SLA) was used as a control. Scanning electron microscopy images revealed different amounts of CS-SeNPs, and the roughness and wettability of Ti surfaces were less susceptible to Ti substrate pretreatment and CS-SeNP immobilization. Besides, X-ray photoelectron spectroscopy analysis showed that CS-SeNPs were successfully anchored to Ti surfaces. The results of in vitro study showed that the four as-prepared Ti surfaces exhibited good biocompatibility, with Ti-Se1 and Ti-Se5 groups showing enhanced adhesion and differentiation of MC3T3-E1 cells compared with the Ti-SLA group. In addition, Ti-Se1, Ti-Se5, and Ti-Se10 surfaces modulated the secretion of pro-/anti-inflammatory cytokines by inhibiting the nuclear factor kappa B pathway in Raw 264.7 cells. In conclusion, doping SLA Ti substrates with a modest amount of CS-SeNPs (1–5 mM) may be a promising strategy to improve the osteogenic and anti-inflammatory activities of Ti implants. [Display omitted] • CS-SeNPs can be anchored to SLA Ti surface via a covalent coupling strategy. • Pretreatment didn't influence original surface topography of SLA Ti substrate. • CS-SeNPs were introduced on the SLA hierarchical microstructure. • Appropriate CS-SeNPs enhanced osteogenic and anti-inflammatory effects of SLA. [ABSTRACT FROM AUTHOR]

A bioactive micro/nanostructured calcium phytate coating was successfully prepared on titanium surfaces by chemical conversion deposition, mainly through hydrothermal treatment of a mixed solution of phytic acid and saturated calcium hydroxide solution. Ultraviolet radiation was carried out to improve the adhesion of the coating to the titanium substrate. Pure titanium with a sandblasted/acid-etched surface was used as the control group. The topography and chemical composition of the modified surfaces were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), and static water contact angle measurement. A pull-off test was performed to measure the coating-to-substrate adhesion strength. Bovine serum albumin was used as a model to study the protein adsorption effect. Cells were cultured on titanium surfaces for 7 days in osteogenic differentiation medium, then the osteoblast compatibility in vitro were explored by alkaline phosphatase and alizarin red staining. After 1, 2, 4 and 8 wks of immediate implantation of titanium implants into the mandibles of New Zealand white rabbits, biological effects in vivo were researched by microcomputed tomography analysis and histological evaluation. The results indicated that the roughness and hydrophilicity of the modified surfaces with micro/nanostructure remarkably increased compared to those of the control group. The pull-off test showed the average adhesion strength at the coating–substrate interface to be higher than 13.56 ± 1.71 MPa. In addition, approximately 4.41 mg/L calcium ion was released from the calcium phytate micro/nano coatings to the local environment after 48 h of immersion. More importantly, the micro/nanostructure titanium substrates significantly promoted cellular differentiation in vitro and in vivo. After 8 wks, the bone implant contact ratio (BIC, %) of the modified implants was higher than that of the control group, at 94.09 ± 0.55% and 86.18 ± 1.99% (p < 0.05). Overall, this study provided new insights into the factors promoting early osseointegration of titanium alloys, which had great potential not only for dental implants but also for various other biomaterial applications. Unlabelled Image • Micro/nanostructured coating was fabricated by chemical conversion deposition. • Titanium implant is gifted with a stable and superior hydrophilicity. • The calcium-decorated surface releases calcium ions rapidly. • Calcium phytate coating accelerates the osseointegration at an early stage. [ABSTRACT FROM AUTHOR]

• Zinc-containing nanowires-modified titanium surface was prepared. • This modified titanium surface improved physical surface properties. • This modified titanium surface enhanced osteoblast behaviors. • This modified titanium surface exhibited excellent antibacterial properties. This study aimed to generate a titanium surface modified with zinc-containing nanowires and explore its enhancements in both biocompatibility and antibacterial property. Acid etching was used to prepare a micro-rough titanium surface. Nanowires were then synthesized on this pre-treated microstructured surface via a treatment with a NaOH solution in a 70 °C water bath. The resultant nanowires-modified titanium surface (Ti-NW) was then subjected to a second treatment with a ZnSO 4 solution in a 70 °C water bath, resulting in zinc (Zn) deposition in the nanowires. This approach yielded a modified titanium surface with Zn-containing nanowires (Ti-NW-Zn). In addition, the control titanium surface was prepared via sandblasting with large-grit and acid etching (Ti-SLA), which is commonly used for dental implants. Afterwards, the properties of these surfaces were examined, including topography, roughness, wettability, elemental composition, metallurgical phase, and Zn ion release. The abilities of adhesion, proliferation, and differentiation of MC3T3-E1 cells on these surfaces were investigated, as well as their antibacterial properties in the context of oral microorganisms of Staphylococcus aureus , Porphyromonas gingivalis , and Actinobacillus actinomycetemcomitans. The modified titanium surface (Ti-NW-Zn) was successfully prepared and appeared as Zn-containing nanowire networks with high hydrophilicity. The Ti-NW-Zn surface was able to continuously release Zn ions. Furthermore, the results of in vitro study showed that the Ti-NW-Zn surface up-regulated cell adhesion, proliferation, osteogenic differentiation. Meanwhile, the Ti-NW-Zn surface possessed satisfactory antibacterial effectiveness in vitro. Relative to conventional SLA titanium surface, the Zn-containing nanowires-modified titanium surface exhibited significant improvements in both osteocompatibility and antibacterial activity against oral microorganisms. [ABSTRACT FROM AUTHOR]